Repair to boudary walls, toilet doors, cupboard and down take pipes of Type IV, V and VI qt at sector 29A, Chandigarh

Amount

Dismentaling structural steel work including door, gates including GI pipe /burbed wire fencing but excluding framed truss etc.

Dismentaling of brick work or stone/ boulder masonary, built in cement mortar including all quoins, arches, pillers etc, but excluding ashler facings, dressed stone work and precast concrete articles.

Rough excavation not exceeding 1.5m deep and getting out, hard / dense soil.

Returning filling in including sprading lavelling, watering and well ramming.

M&L for hard core of gauge n. exc. 63 mm deposited, spread and levelled in layers n. exc. 15cm thick with broken bricks, watered and rammed to a true surface.

M&L for cement concrete foundation filling and mass concrete E2, 1:5:10, 40mm graded aggregate.

M&L brick work with sub class-B brick straight or curve on plain exc 6m mean radious built in 1:4 cement mortar.

M&L brick work with sub class-B brick straight or curve on plain exc 6m mean radious built in 1:4 cement mortar. (except brick)

Labour charges for removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish of cement mortar

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter (Flat surface)

Labour charges for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade (Except tiles)

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like (Type B1 1:2:4 20mm graded aggregate).

Taking down old cement mortar plaster on wall including raking out joint hacking, scrubbing down with water.

M&L for applying neat cement slurry with 3.0 kg of cement per sq. metre & rendering 15mm thick on fair faces of brick work or concrete surfaces 1:6 cement plaster to be finished even and smooth

Dismentaling of asbestos cement (corogated, semicorrugated etc.) sheet in roof coverages.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Shade & design to be approved bt EIC (Make - SAIL, Jindal, TISCO)

M&L 8mm thick Polycarbonate Multilayer sheets fixing with extruded aluminium section profile (top & bottom), side & end sealing aluminium profiles, EPDM rubber gasket, silicon adhesive jointing and SDS hardware.

M&L marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types (Makrana white).

M&L for non skid colour ceramic joint free tiles 7mm to 8mm thick (Square / rectangle) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floor etc set and jointed in neat cement slury and pointed in white / colour cement to match. (Make Johnson- Endura/ Kajaria/ Nitco/ Somany) (1st Quality)

M&L 15mm, 1:4 cement plaster screed bed or bedding layer of mortar for laying floor finish.

Labour for fixing of framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

M&L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both faces is covered with decorative face veneer with lipping/ frame to match, (Kit ply, Green Ply, Century)

M&L 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed with S.S full threaded hard deep Screws.

M&L for 125mm, Brass handles, cast type, polished bright, sample will be approved by EIC.

M&L 150mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed sample will be approved by EIC.

M&L for 18/19mm, block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both face, (Kit ply, Green Ply, Century)

S&F for 30mm width of flaps continuous (piano) hinges, brass, bright finish or electrogalvanised

S&F for hasp and staple in 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed / matgnetic door catcher

M&L for UPVC Pipes (SCH-40) 75mm bore dia for trench, including including all accessories Tee, bend etc. (make- Finolex/ V-Guard/ Oriplast/ Diplast).

Removing excavated material exc. 1.5 km but n exc. 5 km and depositing where directed.

SUKHJIT SINGH CONTRACTOR

R S BUILDERS