Renovation of Panchayat Learning Center (PLC) at Panskura-I Gram panchayat JL NO - 83, PLOT NO -1390,1391,1392, under RGSA (2025-26)

Figure

Providing and fixing of false ceiling with powder coated exposedG.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600 mm long,Cross Tee 1200 mm/600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steels crews with distance 300 mm c/c.The Main Runners to be placed @1200mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Mainn Runner at a regular interval of 600mm to for mamodular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200mm long to finally form a grid of 600mm X 600mm. Grid of module size 600mm X 600mm shall be supported by 6mm dia G.I.wire from purlins / soffit. 15mm thick OWAcoustic Board (Mineral Fiber Acoustic Ceiling Tiles)of approved patern and size 595mm X 595mm with NRC value > 0.65 should be placed in the Grid module to forma False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In 1st.. floor. a) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U1520)

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick ) for 1st. Floor

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly,complete as per manufacturer's specification and as per direction of the EIC. (In First Floor) One coat i) Water based interior grade Acrylic Primer

Acrylic Distemper to interior wall, ceiling with a coat of solvent grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Total Rs.

Say Rs.

Add: @ 9.00 % CGST Rs.

Add: @ 9.00 % SGST Rs.

Total Rs.

Labour Cess 1%

Total Rs.

Estimated Cost

Electrical works and E-govermence goods supply & fitting fixing work.

Fixing only Sheet Steel Main Switch (Rewirwable type)/ Change over on Flat Iron Frame/Angle Iron Frame on wall 100A

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 6-32A sp legrand make

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. 2 x 2.5 sq mm

10 watt LED consealed Panel Light(Philips/Bajaj make)

Supplying fitting fixing 60 watt ceilling Fan (Havels,crompton etc.)

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25A Modular starter (Brand approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Supply,fitting & fixing Wall Mounted speaker(JBL,Ahuja,Philips ),30 watt

Supply,fitting & fixing Bluetooth Conference Microphone,Echo and Noise canceliation.360 degree pickup from 20 ft.

Supply, fitting and fixing Interactive Digital Smart board of Maxhub/Benq/Samsung or others Brands (approveed by EIC) google EDLA certified AI-Powered Interactive Classroom Device, screen size -65'', operating System android 14.0 EDLA, of 8 GB RAM, ROM 128 GB, CPU Octa Core/RK3576(4*ARM Cortex A72@ 2.2 GHz+4* ARM Cortex A53 @ 2 GHz,GPU- Mail-G52 MC3, Camera -Auto-focus 48 MP 4K UHD Quality Video (AI camera with sound localization and intelligent framing Pro Models Only), Mic 8-Array Mic(Pro Models Only), Security-NFC Integration for quick & secure teacher login, Surface Protection- 3.2mm Toughened Glass/9H Hardness, Brighness-450 nits, Contrast Ratio-Typ:1200:1, Response time-≤5 ms, Display Colours-1.07 Billion (10-bit),with Accessories of Remote, Touch Pen, 3M Power Cord, 3M USB A-B Cable, 3M HDMI Cable, Additional Power Cord with 3 year on-site warranty.

Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303-1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor For Stage floor in Training Centre & Cup Board

iii) 9 mm

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor. Glossy/Matt/Suede excluding surface texture or metallic lustre. (ii) Thickness of laminate 1 mm For Stage floor in Training Centre

Provide 160 Watt advanced power amplifier Ahuja SSA-160EM is a 160W RMS (220W Max) PA mixer amplifier, designed for medium-sized venues. It features 5 microphone inputs, 2 auxiliary inputs, and 1 line input, with a frequency response of 50-15,000Hz ±3dB. The amplifier also includes bass and treble tone controls, preamp and line outputs, and various speaker output options (4Ω, 8Ω, 70V, and 100V). It can be powered by AC (220-240V) or DC (24V) and has a built-in circuit protector for overload and short circuit protection incl. installation comp.

Providing and supply of ceiling mounted Projector having 3300 Ansi lumens Brightness, 15000:1 Contrast Ratio, Aspect ratio 4:3, Native Resolutions, 1024 X 768 (XGA) 12000 hours Lamp life in Eco mode, with connectivity for VGA, HDMI and USB, inclusive of power cable, Remote control unit with batteries, all accessories complete. Make and Model: Epson EB-E01 Projector incl. installation comp.

Providing, Supply and installation of Projector Screen suitable for 4:3 aspect ratio, of screen size 8'w x 6'h (120" diagonal), with white matte screen, synchronous/tubular motor for smooth noise free operations, lightweight steel casing suitable for wall or ceiling installations, screen suitable for front projection, inclusive of remote controller for screen operations, hardware, accessories, etc. complete. Make: Grand Logic Pro Series

Providing, supply and installation of Projector Ceiling Mount Kit, Suitable for fixing of above projector mentioned in item 1(a), of adjustable height with extension rod up to 3'ht., tilt and rotational adjustment, inclusive of all necessary mounting hardware, accessories, etc. complete. Make: Logic

LG AI UT80 139.7 cm (55 inch) 4K Ultra HD LED Smart WebOS TV with AI Acoustic Tuning (2025 model)

Purchase of sewing machine for traning of women (38 Built-in Stitches Sewing Machine With 2 Speed,Reverse Sewing,Wide Table,Light Electric Sewing Machinewith Rilson SPECIAL HEAVY STAND TABLE OF SEWING MACHINE WITH HEAVY BALANCE WHEEL AND 2 BELTS Manual Sewing Machine)

HP Laptop 14-gr-1036TU Silver intel 'Core' Ultra 7 155H processor Windows 11 Home 35.6 cm (14) diaganai PHD display with intel 'Arc' Graphics 16GB DDR5-5600RAM 512 GB SSD Hard Drive

Supplying fitting fixing HP Smart Tank All in one 790 Colour Leserjet Printer

Supply of 3 copies colour photo (Pre+Post+ongoing) work & a Display board mentioning name of scheme, fund, year, implementing agency, expenditure detail in writing including fitting fixing comp. at work site.

Total Rs.

Say Rs.

Add: @ 9.00 % CGST Rs.

Add: @ 9.00 % SGST Rs.

Total Rs.

Labour Cess 1%

Total Rs.

Estimated Cost

Rupees Six Lakhs Only

GROUP - B ( CIVIL WORKS OF GROUND FLOOR & 1ST FLOOR )

Figure

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. a) Depth of excavation not exceeding 1500mm.

b) Depth of Excavation for additional depth beyond 1500mm. and upto 3000mm. but not requiring shoring.

Earth work in filling in foundation trenches or plinth and land development with good earth, in layers not exceeding 150mm. including watering and ramming etc. layer by layer complete. a) With earth obtained from excavation of foundation.

Filling in foundation or plinth by fine sand in layers not exceeding 150mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. Fine sand

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

ii) First Floor

Hire and labour charges for shuttering with centering and necessary staging upto 4m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (Upto roof of ground floor). a) Upto Ground Floor Roof. Steel shuttering or 9 to 12mm. thick approved quality Ply board shuttering in any concrete work.

b) In First Floor.

c) In Second Floor.

Reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section complete as per drawing and direction. Tor Steel. a) Upto Ground Floor Roof.

b) From Ground Floor Roof to Ist Floor Roof.

c) From 1st Floor Roof to 2nd Floor Roof.

Brick work with 1st class bricks in cement mortar (1:6). a) In foundation and plinth.

b) In Super-structure, Ground Floor.

c) In First Floor.

d) In 2nd Floor.

125mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. a) In Ground Floor.

b) In First Floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). (Excluding cost of chipping over concrete surface) i) With 1:6 cement mortar. a) 20 mm. thick

b) With 1:4 cement mortar. 15 mm. thick plaster.

c) 10mm. thick plaster.

Neat cement punning about 1.5mm. thick in wall dado, window, sills, floor, drain etc. Note: Cement 0.152 Cu.m per 100 Sq.m.

Supplying and laying true to line and level 20mm./25mm. thick precast roof tiles made of cement concrete with stone chips as per approved strength and density set in 25 mm. (Avg.) thick cement mortar (1:3) and filling up joint (3 mm wide ) with cement sand morter (1:1) applying cement slurry @ 1.75 kg per Sq.m back of tiles and then setting close the precast tiles,finishing up the joints with slurry already laid and finally finishing the top surface including providing 150 mm.high skirting with the same tiles flushed with the inside surface of parapet wall,finishing the mout of rain water pipes,curving etc.as necessary complete as per direction of Engineer-in-charge. For 25mm. thick precast tiles.( Cement 14.6 Kg/sq.m underlayer)

Supplying and laying chequered tile of any shade & of approved quality with (1:1 ½ : 3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick (Avg.) cement morter (1:3) complete in all respect with all labour and materials.(Useing cement slurry@ 4.4 kg/Sq.m at back side and @ 2.4 kg/Sq.m for joint filling) a) 30mm. thick (Red Variety).

18mm. to 22mm. thick kota stone slab set in 20 mm th.(Avg) cement mortar (1:4) in floor,Stair,lobby including pointing in cement slurry with admixture of pigments matching the stone shade including grinding & polishing as per direction of Engineer-in-Charge to match with the existing work.(Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0kg/Sq.m) a) Ground Floor.

b) In First Floor.

Supplying, fitting and fixing 18mm. to 22mm. thick kota stone slab in wall, dado in 15 mm th.(Avg.) cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass/copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as per direction of Engineer-in-Charge including cost of materials, labour scaffolding, staging, curing complete.(Using cement Slurry for bedding @ 4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m) a) Ground Floor.

b) In First Floor.

Supplying fitting & fixing marble slab /tiles 15 to 18 mm. thickness in floor, lobby,stair, landing and treads etc. over 20 mm th.(Avg.) base of cement morter (1:2) laid with white cement slarry @4.4 k.g /sq.m before placing marble and jointed with white cement slurry @ 2.0 k.g / sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineer-in-charge in Ground Floor. a) With Makrana plain pink/ Adranga pink/ garbh gulabi/udaypur pink/Udaypur Green/Black Bbhaslana. Area of each Slab/tile exceeding 0.30 M2 but not exceeding 0.60 M2. a) In Ground Floor.

b) In First Floor.

Supplying, fitting, fixing, marble slab/ tiles, 15 mm. to 18mm. thick in dado/wall in 15 mm th.(Avg.) cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slarry @ 4.4 k.g/ m2 at the back side of marble and pointing in cement mortar (1:2) ( 1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding staging, curing complete. (a)With Makrana plain pink/ Adranga pink/ garbh gulabi/udaypur pink/Udaypur Green/Black Bbhaslana. i) Area of each Slab/tile upto 0.30 sq. m. a) In Ground Floor.

b) In First Floor.

Supplying, fitting & fixing granite tiles 10 mm to 12 mm. thick in columns, wall, facia etc. with 15 mm th.(Avg.)cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass/copper hooks including pointing in cement mortar (1:2), 1 white cement & 2 marble dust) with admixture of pigment Matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labour, scaffolding, staging, curing & roughening of concrete surface complete.Using cement slarry at back side of tiles @ 4.4 K.G / m2 and white cement slarry for joint filling @ 1.8 k.g /m2) Area of each slab upto 0.2 sq. m.

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work and 4 nos. of key stones (10 mm.) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of conc.surface, if necessary or by synthetic adhesive and grout materials etc. a) Wall With sand cement morter (1:3) 15mm th. & 2mm th. cement slurry at back side of tiles using cement @ 2.91 kg /m2 and joint filling using white cement slurry @ 0.20 kg/m2 Area of each tile above 0.09 m2 colour decorative.

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete,iron butt hinges and M.S clamps. Sal : Malayasian

Wood work in upper rails of railing, hand rail of staircase balcony etc. including necessary bend, moulding fitted and fixed complete (for purpose of payment section will be measured in the square). Sishu.

Supplying fitting & fixing M.S. clamp for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction.(Cost of conc will be paid separately) a) 40 mm x 6 mm, 125 mm length.

Supplying profiles of required section made of Aluminium Alloy extrusions conforming to IS : 732-1983 and IS : 1285-1975 ; Anodized (with required film thickness and specified colour/natural) matt finished conforming to IS : 1868-1983 for fabrication of composite door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-in-charge. (A) In 10-12 Micron thickness Annodizing film. I) Natural White a) 2-track sliding window. i) Bottom frame

ii) Top & Side frame.

(k) Movable door Shutter i) Door frame (Top & sides)

ii) Agyrrwe Top rail.

iii) Bottom rail.

Lock rail

Door vertical

Glazing Clip.

Labour charge for fabrication and installation of composite door, window, partitions made from anodized extruded alloy aluminium sections for the followings units :- A) Glazed aluminimum sliding windows made of extruded and anodized alloy aluminium sections, fabrications, including cutting to proper shape and size, drilling and aligning of window and shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesive and joineries along with extruded neoprene or EPDM gasketing in between window frame and masonary work (walls, column, beam, lintels etc.) as well as between glass and shutter frame for fixing glass & Poly Sulphate Sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing the glass as per drawing, specification and direction of Engineer-in-charge. The rate includes the hire charges of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleate angle etc. but excluded the cost of extruded aluminium sections, glass, neoprene/ EPDM gasketing, locking arrangement and rollers. 2 track sliding window.

(A) Partly glazed partly panelled or fully glazed single leaf aluminium swing door made of extruded and anodized alloy aluminium sections, fabrications, including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor spring placed in the floor with mending damages, with top pin assembly of approved make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesive and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene of EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing specification and direction of Engineer-in-charge.

Supplying PVC rollers for sliding windows as per direction of Engineer-in-charge.

Supplying Maruti lock (100 mm).

Supplying EPDM gasket of approved make and brand as per direction of Engineer-in-charge For sliding windows : a) “T” shaped EPDM gasket for frames.

b) “U” shaped EPDM gasket for glass.

Supplying bubble free float glass of approved make and brand. Confirming to IS : 2835-1987. a) 5 mm. thick Coloured/Tinted/Smoke Glass.

b) 12 mm. thick clear glass

Supplying 4 lever mortice lock or any approved make and brand as per direction of Engineer-in-charge. a) 150 mm.

Supplying 125 mm. dia Acrylic handle for aluminium door as perapproved make & brand. Natural colour.

M.S. works in framed gratings of window etc. made of round or square bars and frame work or M.S. flats(with bars securely fixed to the flat bar frame) with or without intermediate flat bar stiffener and fixed with necessary screws etc. complete as directed. a) In ground floor.

b) In First floor.

Supplying, solid flush types door of deluxe decorative (both, side) quality conforming to IS : 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65 mm. wide each and the entire frame fitted with 27.5 mm wide battens placed both ways in order to made the door of solid core and internal lipping with teak, mahogany or rose wood approved decorative veneers using phenol for maldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor. a) 35 mm. thick shutters (single leaf) In Ground Floor.

b) In First floor.

c) In 2nd Floor.

Supplying fitting and fixing in position approved P.V.C. door frame (matt finish) made of extruded P.V.C. multi chamber hollow section having dimensions 60 mm. x 50 mm. x 2 mm.(+ - 0.2 mm. )and horizontal section will be joined with vertical section by steel screws after inserting two number steel brackets as reinforcement making suitable for placing hinges, one steel tube 40 mm. x 20 mm. x 1.2 mm will be inserted on one full vertical side of the frame(hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials taxes and all other incidental charges complete.

PVC Door Shutter-30mm thick. Supplying, fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multi cavity hollow chamber of 59mm x 30mm section with 2.0mm (+-0.2mm wall thickness. Horizontal & vertical section shall be fixed to each other by self tapping screws and one solid polymeric /M.S galvanized tubular L-shaped brackets 100 mm x 200 mm in each corner of the shutter frame for placing hinges. Polymer based multi cavity hollow section of 120 mm. x 30 mm with 2.0 mm (+- 0.2mm) wall thickness will be placed in the middle,reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mm x 25 mm with wall thickness 1.2mm(+-0.2mm) and 2 nos. of 6 mm. dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges/hasp bolt/tower bolt/ door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliances. Carriage of all materials taxes and all other incidental charges complete. The rate is exclusive of cost of hinges, hasp bolt, tower bolt, door ring etc. In Ground Floor.

Supplying “Godrej” mortice lock chromium plated with keys 6 levers including fitting and fixing complete.

Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.(Godrej) In ground floor a) Medium type.

Anodised aluminium barrel/tower/socket bolt (full covered) of approved quality manufactured from extruded section conforming to IS : 204/74 fitted and fixed with cadmium plated screws. a) 225mm.Long x 12mm. dia bolt.

b) In 150mm. x 10mm. dia bolt.

Anodised aluminium Aldrop/Sliding bolts of approved quality manufactured from extruded section conforming to I.S. Specification (I.S. 2681/66) fitted and fixed complete. a) 250 x 16mm. dia bolt.

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. Specification (I.S. 205/66) and fitted and fixed with cadmium plated screws. a) 100 x 63 x 3.2mm.

Anodised aluminium D-Type handle of approved quality manufactured from extruded section conforming to I.S. Specification (I.S. 230/72) fitted and fixed complete. a)With continuous plate base hexagonal/round rod 125mm. grip x 12mm. dia rod.

Supplying, fitting, fixing cast iron down pipes conforming to IS: 3989 -1990 and IS: 1729-1964 of in position with necessary clamps, nails, including making hole in wall, floor etc. and cutting trenches in any soil through masonry concrete structures etc. if necessary and mending good damages including jointing with jointing materials complete. a) 100mm. dia. (Internal).

Supplying, fitting fixing C.I. Specials of down pipes in position with clamps, nails etc. with jointing materials including cutting holes in masonry or concrete, mending good damages complete. a) C.I. Bend of Down Pipe. 100mm. dia.

b) C.I. Shoe of Down Pipe. 100 mm. dia.

Synthetic distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacture’s specification) including cleaning and smoothening surface (Two Coats).

Protective and decorative textured exterior high class matt finish paint of approved quality, composed of special Thermoplastic resin containing fine crystalline additives drive from Granite as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour scaffolding and all incidental charges but excluding the cost of primer. i) Two Coat. a) On New cement plaster surface.

Applying exterior grade acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per Manufacturer’s specification and as per direction of the Engineer-in-Charge. (This item to be done under specific instruction of the Superintending Engineer). In Ground Floor. One coat on New surface.

(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

b) On Steel or other metal surface. With Super-gloss (Hi-gloss). i) Two Coats (With any shade except White).

French polishing to wood work including preparing surface (Ordinary gloss). a) On New Wood Surface.

Collapsible gate with 40mm. x 40mm. x 6mm. tee as top and bottom guide rail 20mm. x 10mm. x 2mm. vertical channels 100mm. apart in fully stretched position 20mm. x 5mm. M.S. flats as collapsible bracings properly rivetted and washered including 38mm. steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.

Estimated Cost

Rupees Two Crores Forty Eight Lakhs Ninety Thousand Forty Three Only

Sub-Assistant Engineer Purba Medinipur Zilla Parishad

District Engineer-in-Charge Purba Medinipur Zilla Parishad

GROUP - C ( SANITARY & PLUMBING WORKS )

Figure

Supplying, fitting and fixing G.I. Pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. a) 15mm. dia medium quality. (Concealed)

b) 25mm. dia medium quality.

c) 40mm. dia medium quality.

d) 50mm. dia medium quality.

Supplying, fitting and fixing in position G.I. Pipes of TATA make for underground works with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, short piece etc. including cost of all materials, jointing materials, cutting pipes, making threads, cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. Pipes and specials with bituminous paint complete in all respect. a) 40mm. dia Medium Quality.

b) 50mm. dia Medium Quality.

Supplying, fitting and fixing Shower of approved brand and make. a) Chromium Plated round shower with revolving joint 100 mm dia with rubid cleaning system ( Equivalent to code no.542 (N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing Peet’s Valve fullway gunmetal standard pattern best quality of approved brand bearing ISI marking with fittings (tested to 21 kg. per sq.cm.). a) 25 mm.

Supplying, fitting and fixing bib cock or stop cock.. (i) Chromium plated Bib Cock with wall flage (Equivalent to Code No. 5047 Model- florentine Jaquar or similar brand).

(ii) Chromium plated angular Stop Cock with wall flage (Equivalent to Code No. 5033 Model- florentine Jaquar or similar brand).

Supplying, fitting and fixing 10 litre PVC low down cistern conforming to I.S. Specification with PVC fittings complete. C.I. brackets including two coats of painting to bracket etc.

Supplying, fitting and fixing White Vitreous china best quality approved make wash basin with C.I. brackets on 75mm. x 75mm. wooden blocks. C.P. waste fittings of 32mm. dia, one approved quality brass C.P. pillar cock of 15mm. dia, C.P. chain with rubber plug of 30mm. dia, approved quality PVC waste pipe with C.P. nut 32mm. dia 900mm. long approved quality PVC connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. a) 630 mm. x 450 mm. size.

Supplying, fitting and fixing pedestal of approved make for wash basin.

Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. a) Sink only. 630mm. x 550mm. x 180mm.

Supplying, fitting and fixing approved brand PVC CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15mm. dia. 600 mm. long.

Supplying fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. a) With valamoid joints inc.sealing with sand cement morter(4:1) up to quarter depth. 100 mm. dia (internal)

Supplying, fitting & fixing Cast iron single branch equal with door conforming to I.S. 1729/1970 including jointing and painting two coats to the exposed surface with approved paint complete. a) With lead caulked joints. 100 mm. dia.

Supplying, fitting & fixing Cast Iron double branch equal with door conforming to I.S. 1729/1970 including jointing and painting two coats to the exposed surface with approved paint complete. With lead caulked joints. 100 mm. dia.

Supplying, fitting & fixing H.C.I.bend with door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. a) With lead caulked joints. 100 mm. dia.

Supplying, fitting & fixing H.C.I.bend without door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. a) With valamoid joints including sealing the top with cement mortar(4:1) 100 mm. dia

Supplying, fitting & fixing H.C.I. heel rest bend conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. a) With lead caulked joints. 100 mm. dia.

(A) Supplying, fitting & fixing H.C.I. offset conforming to I.S.S. including jointing complete with or without ear (75 mm projection) and painting two coats to the exposed surface with approved paint complete. 100 mm. dia

(a) H.C.I. bell mouth plain trap supplied, fitted & fixed with lead jointing. Complete 100 mm. dia and painting two coats to the exposed surface with approved paint complete.

Supplying, fitting and fixing approved patent vent cowl I.C.I. conforming to I.S.S.and painting two coats to the exposed surface with approved paint complete conforming to ISS and painting two coats to the exposed surface with approved paint complete. 100 mm. dia

Supplying, fitting and fixing cast iron ‘P’ or `S' trap conforming to I.S. 3989/1970 and 1729/1964 including lead caulked joints and painting two coats to the exposed the surface. 'P' Trap 100 mm.

Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides). 150 mm.

Supplying, fitting and fixing E.W.C. in white glazed virtreous chinware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap.

Flat back urinal (half stall in urinal) in white vitreous chinware of approved make supplied, fitted and fixed in position with brass screws on 75 mm x 75 mm x 75 mm. wooden blocks complete. a) 590 mm x 390 mm x 380 mm

Squating plate with integral flushings in white vitreous chainware of approved make supplied, fitted and fixed in cement concrete ( 6:3:1) with jhama chips complete. a) 450 mm x 350 mm

Half round channel with or without outlet as required set in cement concrete ( 6:3:1) with jhama chips complete. White vitreous chinware 600 mm x 150 mm

Closet seat of approved make with lid and C.p. hinges, rubber buffer and brass screws supplied, fitted and fixed complete. a) E.W.C. Bestolite (solid type) black

Supplying, fitting and fixing 25 mm. thick marble partition slab with chawk doongri marble square cut, both sides polished with two fornt corners rounded and edges polished.

Supplying, fitting and fixing beveled edged mirror 5.5 mm thick silver red as per I.S. 3438/1965 together with brass C.P. hindes. 600 mm x 450 mm.

Supplying, fitting, and fixing liquid soap holder. Cromium plated.

Supplying, fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary. a ) Box type size 175 mm x 150 mm.

Supplying, fitting and fixing porcelain soap tray of approved make. a) Recessed Soap tray of size 150mm x150mm.

Supplying, fitting and fixing bathroom shelf of approved make of size 580 mm. x 150 mm (porcelain).

to inside walls and out-side walls upto G.L. and 20 mm. thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit cover with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm. thick cement plaster (1:4) in all external surface of the Slab & one 560 mm dia R.C.C. manhole cover of approved makes supplied fitted & fixed in the slab with necessary fittings, necessary earth work in excavation in all sorts of soil, filling sides of pit, with earth and removing spoils after work complete in all respect with all costs of labour and materials.

Construction of Septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100mm thck R.C.C (1:1.5:3) top slab with necessary fittings, 20 mm. thick cement plaster (4:1) with neat cement finish to the internal surface and 15 mm thick cement plaster (4:1) to outside wall upto 200 mm below G.L. floor finished with 25 mm thick grey artificial stone over 100 mm thickR.C.C (1:1.5:3)bottom slab including supplying, fitting and fixing all necessary specials, fittings S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tank with earth, removing spoils, filling, up the chamber with clear water, removing foreign, materials from the chamber and including, constructing, attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0. 5% by weight of cement,with all costs of labour and materials. 100 Users With Bazree (N.B. Variety).

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (6:1) band all round and cement brick work (6:1) upto 0.90 metre from top with 19 mm. thick cement plastering (4:1) to inside face upto the depth of Cement brick work, 12 mm thick cement plaster (4:1) on outer face from top of the well upto G.L. and 6 mm. thick cement plaster (4:1) on top of the R.C.C cover slab including filling bottom 1.00 metre of inside of the well brick metal (50 mm to 63 mm size) including R.C.C. cover slab of designated thickness with cement concrete (4:2:1) with stone chips with necessary reinforcement and shuttering including one 560 mm dia R.C.C. manhole cover of approved make supplied, fitted and fixed in the cover slab with necessary fittings making necessary, arrangements for pipe connections, excavation of well including shoring, dewatering and removing the excess earth from the premises as direction complete in all respect with all costs of labour and materials. a) With 250 mm thick dry brick work and 250 mm thick cement brick work(6:1) and 1.00 m inside dia.

Labour for boring tube well of required dia. By Water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tube well pipe and the bore. a) For depth upto 150 metre for 50 mm dia tube well top enlargement of 100 mm . dia. 50 mm dia boring etc.

b) 100 mm. dia. Boring etc. Top enlargement.

Supplying G.I. pipe strainer with brass net & jacketed of approved quality. (Heavy type) 50 mm. dia.

Supplying fitting and fixing steel cutter piece upto 450 mm long with sockets. 50 mm. dia.

Supplying fitting and fixing check valve (vertical) G.M. tested to 21 kg per sq. cm. 40 mm. dia.

Supplying, fitting and fixing heavy type bell mouth reducing socket.

Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with ‘V’ noth including hire and labour charges for all tools and plants and scaffolding as required complete in all respect.

Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm. to 5 mm. or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete.

Supply of G.I. pipes of TATA make of different dia. Including necessary sockets. a) 40 mm. dia. (M)

b) 50 mm. dia. (M)

c) 100 mm. dia. (M)

b) 50 mm. dia.

c) 100 mm. dia.

Supply of G.I. plain tee of approved brand and make. 40 mm.

Supplying, fitting and fixing Centrifugal pump (Crompton Greaves). 2 H.P.

Estimated Cost

Rupees Twenty Five Lakhs Twelve Thousand Two Hundred Seventy Three Only

Sub-Assistant Engineer Purba Medinipur Zilla Parishad

District Engineer-in-Charge Purba Medinipur Zilla Parishad

GROUP - D ELECTRIFICATION WORKS.

Figure

ELECTRIFICATION WORKS. (Details schedule of electrical work will be available during issue of work order )

Estimated Cost

Rupees Eighteen Lakhs Sixty Two Thousand Four Hundred Eighty Nine Only

Sub-Assistant Engineer Purba Medinipur Zilla Parishad

District Engineer-in-Charge Purba Medinipur Zilla Parishad

Percentage BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Renovation of Panchayat Learning Center (PLC) at Panskura-I Gram panchayat JL NO - 83, PLOT NO -1390,1391,1392, under RGSA (2025-26)