TENDER FOR ITEM RATE CONTRACT FOR REWIRING TO INTERNAL ELECTRIFICATION AT 2 AHQ SIG REGT, 2 COY UB AREA SIG COY AND GE(U) E/M MEERUT CANTT UNDER AGE E/M (ES) AT GE(U) E/M MEERUT CANTT

Amount

M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm (7.50m ong) as earth strip electrode bolted or rivetted to earth plate at one end and connected , GI earth strip encased in and including 40 mm dia GI 'light grade' pipe( 7.50m long) from upper end of earth plate upto equipments,20mm dia bore GI pipe 'medium grade' as water pipe from earth chamber to upper edge of earth plate, GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 40mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 8mm dia @ 150 c/c both ways with 6mm dia MS round bar as in lifting handles, and mild steel angle iron frame 40mmx40mmx5mm for pit cover ,excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate number 3 of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit for unserviceable materials (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc to match with the existing complete all as specified.

Taking job card from complaint cell loacted at MH E/M complaint cell at 09 AM , for carrying out repair by taking down and dismantling of internal unfunctional electrical fittings/ fixtures/ accessories /articles, checking for its serviceability and renewal/ replacement thereof , making it functional and testing at MH meerut, 2 AHQ Sig Coy, 2 Coy UB Area, Dabathwa Mil Stn. with in 48 hours from collecting the Job card . Note:- (i) Difficulty in reparing / attending the complaints if any faced shall be reported to Engineer-in-Charge in writing by next morning. (ii) Unit rate quoated shall deem to be included for materials like copper wires from ceiling rose / connector to fittings, , stainless steel screws, washers, PVC sleeves, required tools and tackles, oil etc (iii) Accessories renewed shall be paid under appropriate items listed hereunder separately at supplied only rates. (iv) Set of 04 complaints shall be considered as one Job for the purpose of payment under this contract.

Supply only polycarbonate Switch piano flush type, SP, 6 Amps, one way ( ISI) marked, AC, 240 Volts complete all as specified.

Supply only polycarbonate bell push flush type,SP, 6 Amps, one way ( ISI) marked complete all as specified.

Supply only electric Bells, AC, 230 Volts, single pole complete all as specified and directed.

Supply only Polycarbonate Switch piano flush type, single pole , 16 Amps, one way ( ISI) marked complete all as specified.

Supply only Polycarbonate socket out let 2 in 1, 5 pin , 6 Amps flush type controlled by one switch ( ISI) marked complete all as specified.

Supply only polycarbonate Socket outlet 2 in 1 ,6 pin, 6 & 16 amp, flush type ( ISI) marked complete all as specified.

Supply only ceiling fan regulator electronic modular socket type , rotary 0 to 4 steps , hum free, 100 watts , 230 Volts, ISI marked complete all as specified .

Supply only Lamp holder, polycarbonate type with back plate complete all as specified and directed.

Supply only polycarbonate insulated body ceiling rose 6A, 50x20mm dia with three terminals, ISI maked complete all as specified.

Supply only Light Emitting Diode (LED) bulb 12 watts , 240 volts complete all as specified and directed.

Supply only 20watts Light emitting Diode (LED) tube light fitting wall mounting , indoor decorative alumiinium extruded T5 LED battens , Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, complete all as specified and directed.

M&L point wiring for one light point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in and including 25 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified for the followings:- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

M&L point wiring for one fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in and including 25 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified for the followings:- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

M&L point wiring for one socket outlet point 3/5 pin 16 Amps on independent board controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in and including 25 mm dia or higher size PVC concealed conduits and PVC fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified:- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

M&L point wiring for one socket outlet point 3/5 pin 6 Amps on independent board controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in and including 25 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified:- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

M&L point wiring for one socket outlet point for 3/5 pin 6 amps controlled by one, one way switch on the same board with other switches using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earthwire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified:- Note:- The rate quoted against this item shall be deemed included for cutting chases boxes etc including making good disturbed surfaces to match with the existing.)

M&L point wiring for one bell point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in and including 25 mm dia or higher size PVC concealed conduits and PVC fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

S&F polycarbonate Switch piano flush type, SP, 6 Amps, one way ( ISI) marked, AC, 240 Volts complete all as specified.

S&F polycarbonate bell push flush type,SP, 6 Amps, one way ( ISI) marked complete all as specified.

Taking down of existing unserviiceable Sheet metal enclosures, removing and S&F SPN Sheet metal enlosures (factory made) with 10KA, 'B' curve Single pole MCB rated 20 Amps capacity with socket plug top 2 pin and earth plug complete all as specified including making niche in wall,mounted flush including making good disturbed surfaces to match with the existing complete all as specified.

M&L polycarbonate insulated body ceiling rose 6A, 50x20mm dia with three terminals, ISI maked fixed complete all as specified.

Taking down old unserviceable DB and S & F epoxy powder coated distribution box, Single pole & neutral 4 way with 200 amps rated bus bar, 240 Volts, double door for MCB , grouted flush to walls including making good disturbed surafces to match with the existing complete all as specified and directed.

Taking down old unserviceable DB and S & F epoxy powder coated distribution box, Single pole & neutral 8 way with 200 amps rated bus bar, 240 Volts, double door for MCB , grouted flush to walls including making good disturbed surafces to match with the existing complete all as specified and directed.

Taking down existing unserviceable DB and S & F epoxy powder coated distribution box, Single pole & neutral 12 way with 200 amps rated bus bar, 240 Volts, double door for MCB , grouted flush to walls including making good disturbed surafces to match with the existing complete all as specified and directed.

Taking down of existing unserviiceable Sheet metal enclosures (DB) complete and S&F epoxy powder coated distribution box, TPN, 4 ways, 415 volts, ,metal double door for MCB/isolators , grouted flush to walls including making good disturbed surafces of wall to match the adjoining surfaces complete all as specified and directed.

M&L for submain wiring comprising two single core ,4 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including PVC concealed conduit and conduit fittings , medium grade not less 25mm dia with 2.5 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. ( Note :- (a) Extra length of cables/ wire required for connection to MCB shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) (b) One metre of conduit alongwith 2x4 sqmm wire and 1x2.5 sqmm earth wite shall be measured as one unit length) Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit etc including making good disturbed surfaces to match with the existing.)

M&L for submain wiring comprising two single core ,6 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including PVC concealed conduit and conduit fittings , medium grade not less 25mm dia with 4 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. ( Note :- (a) Extra length of cables/ wire required for connection to MCB shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) (b) One metre of conduit alongwith 2x6 sqmm wire and 1x4 sqmm earth wite shall be measured as one unit length) Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit etc including making good disturbed surfaces to match with the existing.)

S&F Bells, AC, 230 Volts, single pole complete all as specified and directed.

S& F ceiling fan regulator electronic modular socket type , rotary 0 to 4 steps , hum free, 100 watts , 230 Volts, ISI marked complete all as specified .

S & F Miniature circuit breakers SP, 6 to 32 Amps, 240 Volts /415 Volts , 10 KA, 'C' curve rating and to be housed in sheet metal enclosures ( distribution boxes) complete all as specified and directed :- (Note :- Proper and suitable size cable lugs to be fixed with Miniature circuit breakers are included in unit rate of each Miniature circuit breakers of any rating).

S & F Miniature circuit breakers SPN, 40 Amps, 240 Volts , 10 KA, 'C' curve rating and to be housed in sheet metal enclosures ( distribution boxes) complete all as specified and directed :- (Note :- Proper and suitable size cable lugs to be fixed with Miniature circuit breakers are included in unit rate of each Miniature circuit breakers of any rating).

S & F Miniature circuit breakers SPN, 63 Amps, 240 Volts , 10 KA, 'C' curve rating and to be housed in sheet metal enclosures ( distribution boxes) complete all as specified and directed :- (Note :- Proper and suitable size cable lugs to be fixed with Miniature circuit breakers are included in unit rate of each Miniature circuit breakers of any rating).

S & F Miniature circuit breakers FP, 100Amps, 240/415 Volts , 10 KA, 'C' curve rating and to be housed in sheet metal enclosures ( distribution boxes) complete all as specified and directed :- (Note :- Proper and suitable size cable lugs to be fixed with Miniature circuit breakers are included in unit rate of each Miniature circuit breakers of any rating).

S&F Lamp holder, polycarbonate type with back plate complete all as specified and directed.

S&F Polycarbonate socket out let 2 in 1, 5 pin , 6 Amps flush type controlled by one switch ( ISI) marked complete all as specified.

S&F Polycarbonate Switch piano flush type, single pole , 16 Amps, one way ( ISI) marked complete all as specified.

S&F polycarbonate Socket outlet 2 in 1 ,6 pin, 6 & 16 amp, flush type ( ISI) marked complete all as specified.

S&F Light Emitting Diode (LED) bulb 12 watts , 240 volts retrofit type complete all as specified and directed.

S&F 20watts Light emitting Diode (LED) tube light fitting wall mounting , indoor decorative alumiinium extruded T5 LED battens , Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, and making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

S&F Light emitting Diode (LED) recess mounting panel ( edgelit type) 2'x2' - 36 watts, with extruded aluminium housing and milky anti glare diffuser complete including suiatble for grid ceiling and making good disturbed surfaces complete all as specified.

S&F Light emitting Diode (LED) surface mounting panel ( backlit panel) 1'x1' - 24 watts, with CRCA powder coated housing with anti glare diffuser, complete including making good disturbed surfaces complete all as specified.

S&F 12 W , Bulk head fitting consisting PDC aluminium housing with polycarbonate milky diffuser, SMD Light emitting Diode (LED) and heat sink integrated with housing , complete including making good disturbed surfaces complete all as specified.

Supplying , installing, testing, commissioning exhaust fan, heavy duty, 250mm sweep, 230/240 Volts, AC , 50 Hz, 1400 rpm with mild steel louvers and other accessories, making holes in walls to the required shape and size, grouting Mild steel bolts in walls of length not less than 125 mm and 12 mm dia. with nuts and washers, making good disturbed surfaces in cement and sand mortar 1:4, and matching exposed surfaces to match with the existing, removing dismantled brick work /rubbish to a distance not exceeding 50 M complete all as specified .

VIRAT CONSTRUCTIONS

Gupta Automobiles