SPECIAL REPAIR OF BLDG NO P-164/01 TO 06 AT ROBERT BARRACK (GROVER ENCLAVE) OF MH JABALPUR UNDER GE (W) JABALPUR

Amount

Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

M&L for 15mm thick rendering on internal surfaces of wall, in CM 1:6 on fair faces of brick masonry finished fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on external surfaces of wall, in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound as per Manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid for separately as "Supply Only" .)

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

M&L for 25 mm thick cement concrete (1:2:4), type B-0, using 12.50mm graded crushed stone aggregate as in sub-base complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7-8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), as in vertical surfaces such as skirting / dado set and jointed in neat cement slurry and pointed in white cement to over and including 10 mm thick backing in CM (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles7-8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), in floors, set and jointed in neat cement slurry and pointed in white cement to over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm and not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

Material and labour for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed.

Taking down chowkats or frames exc 1.50sqm but n exc 4 sqm with shutter (without taking off shutters from the frames) complete all as specified and directed..

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

M&L for IInd class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.

M&L for mild steel work conforming to Fe-290 Gde-E-165 as in hand rail, holdfast, half round or other steel section or core for wooden hand rail strait portion, drilled and countersunk for balusters running bars for doors, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately .

S&F 35mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on one face and other side covered with decorative face veneer with liping/frame to match complete all as specified and directed.

S&F, 1mm thick wood grain printed PVC sheet fixed or laid on to flush doors by using rubber used adhesive, supplying & fixing at site as per specification, complete all as specified and directed.

S&F, Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F, Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 100 butt hinges extruded aluminium alloy with galvanised mild steel hinges complete all as specified and directed.

Aluminium handles cast type anodised of 150mm complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F in repair 18 mm thick ply , PVC sheet coloured Prelaminated on one side with approved texture as in kitchen cabinet ( with shelves and partition ) including necessary fittings & fixtures as per Manufacturer's instructions complete all as specified and directed

S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open) 30 mm complete all as specified and directed.

S& F for Solid PVC moulded door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening but single prelam PVC sheet used instead of Plain colour PVC sheet as per specification & drawing complete all as specified and directed.

S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for 15mm bore pipe all as specified and directed by Engr-in-charge.

Taking down steel tubing and connections including cleaning for refixing or removal from site for 20mm bore pipe all as specified and directed by Engr-in-charge.

Taking down steel tubing and connections including cleaning for refixing or removal from site for 25 mm bore pipe all as specified and directed by Engr-in-charge.

S&F 25mm bore tubes medium grade galvanized with all fitting such as socket, elbow, Tee tee, union and short length etc. and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 16mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 20mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.

Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site all as specified and directed by Engr-in-charge.

S&F rotational moulded polyethylene water storage tanks, double layered, (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repair gun metal, globe or gate valve for 20 mm bore pipe with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm, bowl size 410 mm x 330 mm x 160 mm, complete all as specified and directed.

S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle, lever, float valve and PVC bend including connecting to ITWC/ ETWC, PVC connection 450 mm long and fixing on wall bracket complete all as specified and directed by Engr-in-charge.

Stainless steel plate rack, 0.56mm thick of standard pattern, 787mm x 900mm size including fixing to wall with 4 Nos 50mm long screws & PVC rawl plugs complete all as specified and directed.

S & F Door Seal rubber etc, as approved by GE, complete all as specified and directed.

S & F PVC cabinate with mirror, of size 400mm x 500mm, etc, complete all as specified and directed.

S&F in repair vitreous China squatting pan of pattern Orissa Pattern , size 580 x440 mm white with P or S trap , front or back inlet and integral foot rests any pattern (excluding flushing cistern and flush pipe) complete but including provn of lime concrete bedding connection to flush pipe , trap etc & making good the disturbed surface, complete all as specified and directed .

S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, PVC connections 450 mm long complete all as specified and directed .

S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joint complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Wall Mixture three in one including Provn of OH shower fancy type screwed down to GI pipe with CP brass cup complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Wash Basin Mixture for hot & cold water with long shank and fly nut complete all as specified and directed.

S & F in repair 15mm bore brass chromium plated stop cock/angle cock fancy type long body with CP brass cup and screwed down to GI pipe complete all as specified and directed.

S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed .

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel/wooden window complete all as specified and directed .

S&F Soap Dish,Chromium plated fancy type with brass screws and wooden/plastic cleats complete all as specified and directed.

Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed .

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed .

S & F for CP Towel Ring as approved by GE, fixed in repairs, complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

M & L for Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms incl edge moulding & cutting holes for gas pipe through drill machine and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing fixed over and including screed bed 15 mm thick in CM 1 : 6 etc all complete.

M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations all as specified and as directed.

M&L for machine cut cudappa stone slab 20 to 25 mm thick over and including cement screed base 15mm thick in CM 1:6 in floors laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down of eaves gutter,rain water pipes ,AC/PVC pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F, in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed

M&L 100 mm thick PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in floor sub base and finished even and fair complete all as specified and directed.

M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 Grade of concrete laid over and including 50mm thick sand cushioning complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and directed.

M&L for Precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Complete removal of existing water proofing treatment from roof and providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non approachable roofs- (i) Cleaning and sweeping and washing down with water to remove all dust etc from plastered roof surfaces / walls and filling of crack with sealing compound etc (ii) Bituminous based primer conforming to IS: 3384 – 1965 @ 0.3 Kg/Sqm (iii) One layer of super thermo APP modified water proofing memberane with non polyester reinforcement (iv) 3mm thick and minimum Weight @3.50Kg/Sqm,laid with gas torch and pasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surface after cutting necessary grooves and making good with PCC gola 1:2:4 type- B1 etc adhere to bitumen all as per manufactures instructions. (v) Applying one coat of aluminum paint @ 0.20 Kg / Sqm in two coats over bitumen layer as per manufacturer instruction . (application including sides lap,over laps shall be provided not less than 10 cm and joint sealed with torch as per manufactureerr's instructions specifications and as per particular specifications complete all as specified and directed.

M&L for 10mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3% by wight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed ( Note : WPC shall be measured & paid for separately " Supply only".)

Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.

S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified & directed.

Cutting holes in brick walls, Exc. half brick but not exc. one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed.

S&F PVC connection 15mm size with brass nuts of length 450mm all as specified and directed by Engr-in-charge. Make:- Symet/ Prayag

S&F Chromium plated mild steel hat pegs, solid body, 175mm to 250 mm, complete all as specified and directed.

M & L preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer,complete all as specified and directed.

M&L for prepartion Surfaces of new wood or wood based materials of any description not other described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed

M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over and including 2mm thick wall care putty on walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer over and including 2mm thick wall care putty on walls complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.

M&L for removal of old painted surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.

Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Prepration of newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

Taking down carefully any type points wiring (light, fan, socket bell or power), complete with fitting such as switches ceiling roses, lamp holders sockets regulators, call bell light fitting with PVC conduit surface/concealed or wooden pattens including sunken cast iron/pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and directed by Engineer-in-Charge.

Taking down carefully Main Switch and Distribution boards any make and size, complete all as specified and directed.

Taking down carefully ceiling fan/Exhaust Fan of any sweep and size and depositing to MES store and Hanging only ceiling fan (M D supply) and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and directed.

Taking down carefully old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof , floors etc to match with the existing surface complete surfaces all as specified and directed by Engineer-in-Charge.

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

M & L for point wiring with PVC insulated 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20 mm (ISI Marked) including all fitting and fixing accessories including sunk in cast iron/ pressed steel terminal boxes duly painted with two coats of anticorrosive paint outside and two coats of aluminum paint inside , 2.8 mm thick hylam brand laminated white Bakelite steel cover for mounting of switches, sockets, fan regulators etc and PVC including 1.5 Sqmm multi stranded copper conductor cable as earth wire and making good the disturbed.

(a) One light point /Bell point controlled by one switches 5/6 Amp

(b) One fan point controlled by one switches 5/6 Amp

(c) One socket point controlled by one switch on same board

(d) One socket point controlled by one switch on independent board

Description all as per item No. 100 here in before but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 2.5 Sqmm sold copper conductor PVC for 3 pin switch socket outlet 115 Amp independent board complete surfaces all as specified and directed

S & F in repair for bell ding dong AC 230 Volts single pole one way complete surfaces all as specified and directed .

S & F in repair for switch piano flush type AC 230 Volts 5 Amps single pole one way complete surfaces all as specified and directed .

S & F in repair for socket outlet flush type , 3 pin, 5 Amps, AC 230 Volts flush type complete surfaces all as specified and directed .

S & F in repair for socket combination , 3 pin, 5 and 16 Amps, AC 230 Volts flush type complete surfaces all as specified and directed.

S & F in repair for ceiling rose surface Bakelite 65 mm x 50 mm , three terminal AC 230 Volts flush type complete surfaces all as specified and directed.

S & F in repair, fan regulator, electronic rotary, step type of polycarbonate, 400 Watt capacity, 240 Volt complete all as specified and directed .

Supply and fixing round shape LED lamp rotary type/holder type of 12 watt complete all as specified and directed .

Supply and fixing round shape 12 watt, 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing smart bright Batten Series, LED luminaire using LED 22 watt 1120 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output , stable color start Extruded Aluminium housing. Energy efficient , Flicker free start inbuilt driver unit, suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per standard specification IEC 605962-1/IS : 10322 (Parts/Secl) complete all as specified and directed.

S & F repair of LED Decorative/ miner light fitting 9 watt alongwith fixture surface mounted suitable for indoor application, Connector block etc. Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible copper conductor cable suitable size complete all as specified and directed.

S & F in repair Bulkhead endura LED light fitting complete with 10 Watt LED and making necessary electric connection to ceiling rose with copper conductor to suitable size & length complete all as specified and directed.

Supply And fix in replacement of LED Security Light Luminaire 35 watt 6000K with high power LED cool white. CRI 75 +/- 5 % supply voltage 220/240/50 Hz light engine driver base pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type, GI pipe 40 mm dia medium grade not less than with 1.2 m long in any shape with 2 Nos of pole fitting clamps made out of MS flat, nuts and bolts and painting with aluminium paint complete all as specified and directed.

S & F in repair, Sheet metal enclosure DBs Triple pole and natural 4-way with 200 Amps rated bus bar 240 volts single pole and natural complete double door complete all as specified and directed.

S & F in repair MCB TPN 415 volts 63 Amps, 'C' Series, complete all as specified and directed .

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC motor 230 v 50 HZ single phase 26-30 watt rated current 0.16 Amp, pf 0.98 370/360 rpm air delivery 220 m3 rated service value 629 m3 /min/watt No. f blades three type of blade left 1.05 mm thick aluminium sheet remote control radio frequency 5 speed + off timer option speed regulation class of insulation 2 Nos bearings including connecting wire complete with all as required and directed .

S & F repair Sheet metal enclosure DBs Single pole and natural 8-way with 200 Amps rated bus bar 240 volts single pole and natural complete double door complete all as specified and directed .

Supply and fixing in replacement MCB Single Pole and Neutral 240 Volt 40 Amps, B series complete all as specified and directed .

Supply and fixing in replacement MCB/Isolators single pole 240 volt upto 40 Amps, B series complete all as specified and directed .

Supply and fixing in repair Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and directed

Earthing complete with galvanized sheet earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground, (Earth pit not less than 2.25 meter deep below ground level) with top edge of plate nit less than 1.5 meter below normal ground level, connected to and including galvanized iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanized iron or steel complete all as specified and directed including testing on completion including the material and labour of the following- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1, pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed. (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S & F in repair for bell push piano flush type AC 230 volts 5 Amps single pole one way polycarbonate complete all as specified and directed .

Supply, installation, commissioning and testing indoor wall mounting LT panel Board in minimum size 1.20 m (height) x 1.20 m (breadth) x 0.30 m (depth) factory made CPRI approved panel, weather , dust & vermin proof indoor , double door , front openable/ including four compartment for fixing of Seven Nos single phase meter and MCB and providing glass view for reading of meter and providing rubber/PVC gasket of suitable size all sides of door, with copper bus bar wrapped with PVC taps/sleeves with maintained the colour code and copper strip/wire bus bar of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main bus bar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5 Sqmm copper wire and connections of all outgoing/incoming existing cable of any size complete all as specified and directed by Engineer-in-Charge. (For JCO/Ors Civilian Md Accn 06 Qtrs)

Supply and fixing single phase propeller type ventilating (Exhaust fan) heavy duty AC 230 volts 300 mm sweep metallic body complete with Metallic louver including making holes of suitable size and making good the disturbed surface and shutters including electric connection with PVC flexible twin core copper wire from ceiling rose to Exhaust fan, nut and bolt complete all as specified and directed. (Note – Old unserviceable fans to be deposited in the MES store Yard)

Supply and fixing single phase propeller type ventilating (Exhaust fan) heavy duty AC 230 volts 300 mm sweep PVC body complete including making holes of suitable size and making good the disturbed surface and shutters including electric connection with PVC flexible twin core copper wire from ceiling rose to Exhaust fan, nut and bolt complete all as specified and directed. Note – Old us fans to be deposited to MES store

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 25 sqmm, 4 core including jointing materials such as cable glands & lugs etc Complete all as directed.

Supply,laying & fixing Double Wall Corrugated (DWC) pipes made of High Density Polyethylene (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. complete all as specified and as directed , outer dia 65 mm and inner dia 38 mm, complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

M & L for returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and directed.

M & L for removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Schedule of credit amount of Rs 54,130.00 to be deducted during AOC

a k builders

RAVI ENTERPRISES

SHRI KRISHNA CONSTRUCTIONS