NIT NO:110/Raipur/B/R/2026-27 (2nd Call)

Providing and Fixing if required glass top Premium Discussion and Meeting Table : a) Discussion Table with wire Manaher (2700W*1500D*750H) as per direction of Engineer incharge.

Providing and Fixing it required Midium Mesh Back Chair: Full Back Size: 46.5cm(W) x 60.0cm (H) Seat 51.0cm (W) x 49.0cm(D) Cushioned Seat Assembly consists of seat outer material 30% glass fiber nylon and upholstered Seat (Poly Propylene) with moulded polyurethane foam and polyester fabric. The net back is made up of back outer (material Glass fiber filled Nylon) & Back Inner (Material PP) and upholster using polyester mesh fabric with high tenacity yarn. High Resilience Polyurethane foam is moulded with 45+2kg m3 and hardness load 12+2 kgf as per IS:7888 for 25% Compression. The support spine is made of High pres-sured Die cast polished aluminium. Armrest has two adjustments Height and Depth of 6.0+0.5cm. Height adjkust ment is provided in aluminum structure of armrest which is connected Aluminium hack spine and operated by button. Armrest top is made of PU molded over plastic inner. Chair must be BIFMA level two certified for design and Griha certified for reducing the carbon footpr int as per 9,-ovt. green initiative. Adjustable tilting mechanism with following features. 360 revolving type. 5 position tilt limiter giving option of variable tilt angle. Seat back tilting ratio 1:2. The mechanism housing is made up of HPDC Aluminum and black powder coated. The pneumatic Height adjustment has an adjustment stroke of 10.0+0.3cm a) Mesh Back Mid Back Chair

Providing and Fixing if required Visitor Chair: Scat Size: 65.5cm (W) x 58.2cm (D) 99.5cm (H) x seat Height 48.5cm Seat and back are made of 1.2+0.1cm thick hot pressed plywood. Measured as per QA method described in OCP-QLTA-PM-P14-18 and Upholstered with fabric and moulded polyurethene foam with PVC lipping all around. The one piece armrest is made of black integral skin polyurathene with 50-70 shore hardness and reinforced with M.S. insert. The tubular frame is cantiviler type & made up of 02.54+0.03cm x 0.2+0.016cm thick MSERW tube and black powder coated (DFT 40-60 microns.). Chair must be BIFMA level two certified for design and 1Griha certified for reducing the carbon footprint as per govt. green initiative. a) Mesh Back Visitor Chairs

Providing and Fixing if required Executive Table of :Size: (W)1665mm x(D)900m x(H)735mm. ERU : (W)900 x (D)483 x (11)670 Combination of Processed Wood and Steel. Worksurface : Prelaminated Board. All edges are sealed with 2mm thick Beading. Understructure is MS ERW square tube 30X 30X 1.6 thick. Side + Front + Back Panels are Prelaminted Twin Board of 18mm Thick. Front Support Tube: MS ERW 32x 19x 1.6 thick. Desk Pedestal: combination of pre laminated panles and MS Sheets. Size: (W)439 x 729(D) x 536(H). Roller Slides. ERU storage: Hindge Door Unit with shelf 341 ( W) x 438(D) x 493(H). Table for Executives

Providing and.Fixing if required lull HB Chair : Full BAck 'Size: 46.5 cm(W) x 60.0cm (H), Seat 51.0cm (W) x 49.0cm(D) Cushioned Scat Assembly consists of seat outer material 30% glass fiber nylone and upholstered Scat (Poly Propylene) with moulded polyurethane foam and Polyester fabric. t he net back is made up aback outer (material glass fiber filled' Nylon) & Back Inner (Material PP) and upholster using polyester mesh fabric With high tenacity yarn. High Resilience Polyurethane foam is moulded with density= 45+2kg/m3 and hardness load 12+2 kgf as per IS:7888 for 25% Compression. The support spine is made of High pressured Die cast polished aluminium. Armrest has two adjustments Height and Depth of 6.0+0.5cm. Height adjust meat is provided in aiuminurn structure of armrest which is connected Aluminium back spine and operated by button. Chair must be BIFMA level two, certified for design and Griha certified- for reducing the carbon footprint as per govt. green initiative. Armrest top is made. of PU molded over plastic inner. Adjustable tilting mechanism with following features. 360 revolving type. 5 position tilt limiter giving option of variable tilt angle. Seat back tilling ratio I :2. The mechanism housing is made up of HPDC Aluminium and black powder coated. Pneumatic height adjustment has an adjustment stroke of 10.0+0.3cm. a) Mesh Back High Back Chair

Providing and Fixing Leathertte High Back and Visitor Chairs for Senior Executives: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18; upholstered with leatherite cover moulded High Resilience Polyurethane foam. The HR polyurethane foam is moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. The adjustable armrest is designed with the following features: Up-Down adjustment- 8 steps (8.0±0.5cm range) Height adjustable armrest structure which is chrome plated & fitted with an armrest top. Fixed Armrest Top is PU moulded over metal insert. The adjustable tilting mechanism is designed with the following features. 360° revolving type. Single point control. Front-pivot for tilt with feet resting on ground, Tilt tension adjustment. 4-position locking with anti-shock feature. Seat/back tilting ratio of 1:2. Back can be adjusted in 5 positions by manually. Stroke of height adjustab le spine is 7 cm. Back height adjustability is applicable for High back and Mid back chair. The pneumatic height adjustment has an adjustment stroke of 10.0 ±0.3 cm. The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch- center dia.(75.0 ± 1.0cm. With castors.) The twin wheel castors are injection moulded in black PP. The tubular frame is powder coated (DFT 40-60 microns) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2± 0.016cm.thk. M.S. E.R.W. Tube with a connecting M.S. Spine welded to it. Back spine is fitted to the frame assembly. Seat can be slide horizontaly as per user convienience. Stroke of seat slide is 5 cm. This option is available for revolving pedstal type of chair. Visitor Chairs: The tubular frame is powder coated (DFT 40- 60 microns) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M .S. E.R.W. Tube with a connecting M.S. Spine welded to it. Back spine is fitted to the frame assembly.

Providing and Fixing if required Premium Synthetic Leatherette Sofa: The under-structure should be made from tropical seasoned hard wood / particle board. The webbing material should be nylon strips of width 2inches / 3inches. The foam at the back of the sofa should be Polyurethane slab stock foam with 1inches recron layer filling at back and arms. Foam density to be 28 Kg / Cu. Mtr. The foam of the seat should be Polyurethane slab stock foam with 1inches recron layer filling. Foam density to be 28 Kg / Cu. Mtr. The sofa should be upholstered with PU synthetic leather. The legs to be visible in front, made of MDF wooden fascia with melamine coating. Three Seater Overall size: 200.0 cm (W) x 88.0 cm (D) x 78.0 cm (H) x 45 Cms. (SH) ( Premium Sofa 3 Seater)

Providing and Fixing if required Premium Synthetic Leatherette Sofa: The under-structure should be made from tropical seasoned hard wood / particle board. The webbing material should be nylon strips of width 2inches / 3inches. The foam at the back of the sofa should be Polyurethane slab stock foam with 1inches recron layer filling at back and arms. Foam density to be 28 Kg / Cu. Mtr. The foam of the seat should be Polyurethane slab stock foam with 1inches recron layer filling. Foam density to be 28 Kg / Cu. Mtr. The sofa should be upholstered with PU synthetic leather. The legs to be visible in front, made of MDF wooden fascia with melamine coating. Three Seater Overall size: 200.0 cm (W) x 88.0 cm (D) x 78.0 cm (H) x 45 Cms. (SH) (Premium Sofa 2 seater)

Providing and Fixing if required Premium Synthetic Leatherette Sofa: The under-structure should be made from tropical seasoned hard wood / particle board. The webbing material should be nylon strips of width 2inches / 3inches. The foam at the back of the sofa should be Polyurethane slab stock foam with 1inches recron layer filling at back and arms. Foam density to be 28 Kg / Cu. Mtr. The foam of the seat should be Polyurethane slab stock foam with 1inches recron layer filling. Foam density to be 28 Kg / Cu. Mtr. The sofa should be upholstered with PU synthetic leather. The legs to be visible in front, made of MDF wooden fascia with melamine coating. Three Seater Overall size: 200.0 cm (W) x 88.0 cm (D) x 78.0 cm (H) x 45 Cms. (SH) (Premium Sofa 1 seater)

Providing and Fixing Center table wooden made Completely in CP teak wood best quality as per choice with matching hand carving/ kharad work as per sofa set with 12mm thick Modiguard brand clear float top of best quality- polished on all edges, placed within wood frame, wood section of 4*2 inches, 4*4inches and 2*2inches to provide best strength and design polished completely in natural teak/chocolate walnut color coated with hi gloss melamine matt polish of best quality done by skilled labors for long last & scratch proof polish. Size:- 36X18X18inches.