Construction of Lawyer's Hall Building at Muzaffarpur for the Year 2026-27.

BUILDING DIVISION MUZAFFARPUR

BILL OF QUANTITY

NAME OF WORK:- Construction of Lawyer's Hall Building at Muzaffarpur for the Year 2026-27.

Estimated cost- 59,44,837.00 Last Date of Sale of B.O.Q-

Cost of B.O.Q - 10,000.00 Date of Tender -

Earnest Money Amount- 1,18,900.00 Time of Completion - 06 Months

Sl.No. Code ITEM OF WORK Quantity UNIT RATE Amount

1 2.29.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m All kinds of soil. 1088.858 100sqm 1355.40 14758

2 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplusx cavated soil as directed, within a lead of 50 m. All Kinds of soil 358.677 cum 360.70 129375

3 2.27.1 Extra for every additional lift of 1.5 m or part thereof in : Ali kinds of soil. 95.579 cum 49.40 4722

4 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 203.561 CUM 123.90 25221

5 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 75.885 CUM 287.30 21802

6 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of atering, taxes, royalty all complete as per building pecification and direction of E/l, 377.753 sqm 283.30 107017

7 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 26.368 cum 3998.10 105422

8 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 9.981 CUM 4923.00 49136

9 6.1.14C+6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra tor Brick work in superstructure above plinth level upto floor V cum 45.390 cum 5765.20 261682

10 6.1.12C+6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1.:4 (1 cement: 4 coarse sand ) Extra tor Brick work in superstructure above plinth level upto floor V cum 4.652 cum 5958.50 27719

11 5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works up to plinth level Concrete of M-25 grade with minimum cement content of 330 kg/cum 91.375 cum 5063.40 462668

12 5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All work above Plinth level upto floor V Level. Concrete of M-25 grade with minimum cement content of 330 kg/cum 57.476 cum 5863.20 336995

13 5.22.7A Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-8mm dia.. 5850.990 KG 94.50 552919

14 5.22.7B Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-10mm dia. 1978.593 KG 92.60 183218

15 5.22.7C Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-12mm dia. 3840.000 KG 90.80 348672

16 5.22.7D Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMT Fe-500-I6mrn dia. 5760.000 KG 91.70 528192

17 5.22.7E Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. hermo-Mechanically Treated bars TMTC-500-20mm dia. 1920.000 KG 91.70 176064

18 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 80.11 sqm 211.60 16951

19 5.9.3 Suspended floors, roots, landings, balcnies and access platform. 134.968 SQM 437.50 59051

20 5.9.5 Centring and shuttering including strutting,propping etc. and removal of form for. Lintels, beams, plinth bams, griders, bressumers and contilevers. 236.430 SQM 404.70 95683

21 5.9.6 Centring and shuttering including trutting,propping etc. and removal of form for. Columns,Pillars, Piers, butmentsPosts and Struts 208.120 SQM 494.40 102895

22 5.9.7 Centring and shuttering including strutting,propping etc. And removal of form for Stairs,(excluding landings) except spiral-staircaces. 18.308 SQM 439.90 8054

23 5.9.19 Centring and shuttering including strutting,propping etc. and removal of form for. Weather shade,Chajjas, corbels etc. including edges 9.990 SQM 550.90 5503

24 5.9.16.1 Centring and shuttering including strutting,propping etc. and removal ofform for. Edges of slabs and breaks in floors and walis-Under 20 cms wide 56.162 SQM 130.20 7312

25 10.15.1.1 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B, Fixing with adjustable lugs with split end tail to each jamb 32.70 metre 405.80 13270

26 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including stainless steel butt hinges with necessary screws 13.23 4.879 2845.60 37647

27 9.147F.1 Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) 5.355 sqm 6404.80 34298

28 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete Twin rubber stopper. 8.000 EACH 60.80 486

29 9.62.2 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm 8.00 each 154.40 1235

30 9.63.2 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 200x10 mm 8.00 each 56.40 451

31 9.66.2 Providing and fixing ISI marked oxidised M.S. handles conforming to IS :4992 with necessary screws etc. complete: 100 mm 16.00 each 25.50 408

32 10.12.1 Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required. 34.721 SQM 3038.90 105514

33 10.13B Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows, Ventilators and comosite units. Steel windows 32.291 sqm 396.70 12810

34 10.13C Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows, Ventilators and comosite units. Steel ventilators 2.43 sqm 405.30 985

35 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc 743.60 kg 161.10 119794

36 10.33.1 Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer MS tube (medium) 40mm nominal bore 44.01 each 121.90 5365

37 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 20.000 EACH 165.40 3308

38 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, onthe top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 12.90 kg 546.80 7054

39 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 16.895 sqm 686.80 11603

40 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 70.581 sqm 795.00 56112

41 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) 11.26.1 20 to 25 mm thick - 140.570 sqm 1252.70 176092

42 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm 17.559 sqm 1334.90 23440

43 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 356.05 sqm 141.50 50381

44 13.12.4 Cement plaster in course sand 1:6 (1 cement: 6 coarse sand) 319.343 sqm 162.80 51989

45 13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 150.981 sqm 125.60 18963

46 13.18 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. 77.966 sqm 229.30 17878

47 13.13.2 + 13.36.6 20 mm cement plaster of mix ;1: 4 (1 cement: 4 coarse sand) Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 20 mm cement plaster 1:4(1 cement: 4 sand) 126.808 sqm 220.00 27898

48 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 470.324 sqm 105.40 49572

49 13.78.1+13.79.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats) 366.04 sqm 119.80 43852

50 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . New work (two or more coats ) over and including priming coat with cement primer 460.334 sqm 102.30 47092

51 13.82.1+13.81.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) With ready mixed zinc chromate yellow primer of approvedbrand and manufacture on steel alvanized iron/steelworks 46.475 sqm 118.10 5489

52 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification. and direction of E/l, 54.39 Per M 1087.90 59171

53 Add Carriage of Materials.

55 Sone Sand Lead 120/km 123.431 M3 2653.10 327481

58 Add Extra Cost in Material

61 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 3.00 Each 4470.90 13413.00

62 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 2.00 Each 4230.00 8460.00

63 17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 4.00 each 2369.90 9480.00

64 17.22 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. 2.00 each 131.60 263.00

65 17.28.2.1 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe 32 mm dia 5.00 Each 104.40 522.00

66 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm 3.00 Each 857.00 2571.00

67 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P Brass brackets and guard rails complete fixed with 40mm long screws, rawl plugs etc.complete. 3.00 Each 713.30 2140.00

68 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangem ent of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms 5.00 Each 424.00 2120.00

69 17.70.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 5.00 Each 325.10 1626.00

70 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 5.00 Each 146.30 732.00

71 12.78.1 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter 7.00 metre 162.70 1139

72 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 6.00 Metre 257.50 1545.00

73 12.80.1 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4coarse sand and making good the wall etc complete 75 mm 10 each 184.10 1841.00

74 12.80.2 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4coarse sand and making good the wall etc complete 110 mm 14 each 182.72 2558.00

75 12.79.2.1 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for therma expansion.(SW) Single pushfit coupler 75 mm 6.00 Each 270.40 1622.00

76 12.79.2.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for therma expansion.(SW) Single pushfit coupler 110mm Single tee with door 1.00 Each 374.60 375.00

77 12.79.3.1 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for therma expansion.(SW) Single pushfit coupler 110mm Single tee with door 75x75x75mm 4.00 Each 141.60 566.00

78 12.79.3.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for therma expansion.(SW) Single pushfit coupler 110mm Single tee with door 110x110x110mm 7.00 Each 193.40 1354.00

79 12.79.5.1 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 75 mm bend 5.00 Each 91.80 459.00

80 12.79.5.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm bend 8.00 Each 132.00 1056.00

81 12.79.6.1 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 75m Shoe 6.00 Each 81.10 487.00

82 12.79.6.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110m Shoe 6.00 Each 115.95 696.00

83 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work including cutting chases and making good the walls etc. 15mm nominal outer dia pipes 10 metre 278.20 2782.00

84 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work including cutting chases and making good the walls etc. 20mm nominal outer dia pipes 8 metre 350.80 2806.00

85 18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work including cutting chases and making good the walls etc. 25mm nominal outer dia pipes 10 metre 463.10 4631.00

86 18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work including cutting chases and making good the walls etc. 32mm nominal outer dia pipes 5 metre 549.80 2749.00

87 18.16.1 Providing and fixing brass stop cock of approved quality : 15 mm dia 5 each 303.80 1519.00

88 18.16.2 Providing and fixing brass stop cock of approved quality : 20 mm dia 5 each 328.00 1640.00

89 18.17.1 Providing & fixing gun metal gate valve with C.I. wheel of approved quality, (screwed end) : 25 mm dia 5 each 532.30 2662.00

90 18.17.2 Providing & fixing gun metal gate valve with C.I. wheel of approved quality, (screwed end) : 32 mm dia 5 each 589.90 2950.00

91 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement , trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes 8 metre 359.10 2873.00

92 18.9.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement , trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 40 mm nominal outer dia Pipes 10 metre 477.60 4776.00

93 18.19.2.2 Providing and fixing gun metal non-return valve of approved quality (screwed end). 32 mm nominal bore Vertical 4.00 Each 777.90 3112.00

94 18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass unions: 15 mm nominal bore 4.00 Each 85.20 341.00

95 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000.00 Litres 9.70 9700.00

96 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS :8931 2.00 Each 434.20 868.00

97 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 3.00 Each 594.80 1784.00

98 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS :8931 15 mm nominal bore 2.00 Each 500.40 1001.00

99 19.7.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 1.00 Each 7,914.70 7915.00

100 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1.00 Each 33,603.40 33603.00

101 4.1.2 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 1.040 cum 4420.80 4598

102 6.1.12C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1.:4 (1 cement: 4 coarse sand ) 7.26 M3 5116.30 37144

103 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 rr,m nominal size) 0.870 cum 4232.40 3682

104 5.1.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of entring, shuttering, finishing and reinforcement-All work puto plinth level 1:1:2 (1 cement:1 coarse sand:2 graded stone aggregate 20mm nominal size) 0.88 cum 5961.90 5246

105 13.17.1 CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 43.23 sqm 203.60 8802

106 13.11.1 Cement plaster in course sand 12 mm cement plaster of mix: 1:3 (1 cement:3 coarse sand) Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 12 mm cement plaster 1:3(1 cement :3 sand) 12.18 sqm 164.30 2001

107 24.1.1.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 60 metre depth below ground level. All types of soil 300 mm dia 75.00 mtr 486.800 36510.00

108 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia 30.00 mtr 660.100 19803.00

109 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia 20.00 mtr 673.50 13470.00

110 24.8 Gravels packing in tubewell construction in accordance with IS 4097 including providing graval fine/medium/coarse,in required grading & sizes as per actual requirement,all complete as per direction of Engineer-in charge. 4.78 Cum 1343.20 6420.00

111 24.13.2 Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe ,removable as per requirement, all complete for borewell of, 150 mm dia 1.00 Each 210.70 211.00

112 24.14.2 Providing & fixing MS clamp of required dia to the top of housing/casing pipe of, removable as pe tubewell as per IS:2800 (part-I), including necessary bolts & nuts of required size complete 150 mm dia 1.00 Each 1531.40 1531.00

113 24.15.2 Providing & fixing Bail plug/ bottom plug of required dia to the bottom of pipe assembly as per IS;2800(part-I), 150 mm dia 1.00 Each 281.80 282.00

114 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, 8.00 Hours 916.80 7334.00

115 AR Supplying 2 HP submerssiable Motor with complete sets (Rate Approved by S.E.,B.C.D Circle on dated 07/09/2016 1.00 Set 20650.00 20650.00

116 0L07 Providing Plumber for fitting fixing and testing etc all complete job as per direction of E/I 2.00 Each 454.15 908.00

118 13.17.1 CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 5.330 sqm 203.60 1,085.00

119 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia 15.00 metre 673.50 10,103.00

120 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. 0.31 cum 1188.90 369.00

121 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 0.880 cum 1,195.60 1,052.00

122 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 0.190 cum 1,195.60 227.00

123 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of entring,shuttering, finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 0.267 cum 4688.3 1,252.00

124 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 15.00 metre 257.50 3,863.00

125 12.79.1.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Coupler 110 mm 2.00 each 120.00 240.00

126 NS/ Rate approved by SE South Bihar Circle Supplying testing installing and commisioning of ISI marked 4.5kg capacity carbon dioxide type including valve hose reel with provision of wall bracket fixed with anchor fasteners all complete job Capacity 4.5 Kg. 3 Each 8500.00 25500.00

127 NS/ Rate approved by SE South Bihar Circle Providing and fixing abc powder type fire extinguishers as per is 15683 consisting of welded ms cylindrical body automatic modular abc powder type extinguisher actuated through a sprinkler head mounted on the extinguisher body complete with internal charge Make:- Newage/ Ceasefire/Kalpex or 3.00 Each 8501.00 25503.00

TOTAL = 5747537

Deduction NS Items (-) 51003.00

Total Amount of SOR Items 5696534

Correction Factor 0.982 on SOR items 5593996

Add 5.36% GST 299838

Add NS Items 51003.00

Total Amount 59,44,837.00

Executive Engineer,

Building Division, Muzaffarpur.