REPAIR TO INTERNAL ELECTRIFICATION INCLUDING METERS CEILING FAN GEYSER AND EXTERNAL ELECTRIFICATION INCLUDING FPS DBS LT PANEL CABLE STREET LIGHT AND APFC AT IAM AND CHALLAGHATTA UNDER GE AF MARATHAHALLI

Amount

Taking down unserviceable wire carefully from copper/ aluminum point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., and making good the disturbed surfaces of walls, ceiling etc., including painting with same colour of the background, complete all as specified and as directed.

Taking down carefully Unserviceable Sub main wiring of any size and type batten or conduit, surface or concelaed including removing material from site and making good the disturbed surfaces of walls, roofs etc to match the existing Complete all as specified and as directed. Note: Taking down of Fittings and Fixtures shall be measured under respective Items Separately.

Material and Labour for Wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit incl accessories surface type run on walls/ ceiling incl MS terminal boxes mounted concealed on walls with suitable size moduler cover plate inner and outer fixed with machin screws for housing the moduler switches, switch socket , fan regulators etc., incl provision of 1.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly for One Light point controlled by one switch all as specified and as directed.

Description all as per item No 3 above but one fan/Exhaust. fan point controlled by one switch.

Description all as per item No 3 above but one 5A 2pin/3pin switch socket out let multipurpose on independent Board.

Description all as per item No 3 above but one 5 Amps socket point on same board with other switches

Description all as per item No 3 above but one call bell point controlled by one bell push

Description all as per item No 3 above but wiring complete with 2.5 Sqmm for 5 pin 5/15A socket multipurpose on independent board Note :- item No 03 to 08 (i) The earth wire for the points shall be laid from the respective switch board only . (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box and moduler cover inner and outer are deemed to be included in the item rate quoted for point wiring

S & F in repair Modular Switch 1 way 6 Amps 1 Module .

S & F in repair Modular Socket,6 Amps- 2/3 pin combined 2 Moduler.

S & F in repair Modular Switch 1 way 16 Amps 1 Moduler.

S & F in repair Modular Socket,6 A/16A,2 Moduler.

S & Fin repair Modular bell push 6A,1 Module.

S & F in repair Modular type Fan step regulator 120W type 2 moduler

S & F in repair Switch piano flush type, single pole, one way 5 Amps.

S & F in repair Switch socket combination 2 -in-1, 3 pin/5 pin, 5 Amps 230 volts.

S & F in repair Switch Socket Combination 2 in 1, 3 pin 5 Amps and 15 Amps flush type, 230 volts .

S & F in repair Socket outlet 2 in 1, 3 pin, 5A Flush type 230 volts.

S & F in repair Socket Outlet 2 in 1, 3 pin, 5 and 15 amp flush type 230 volts

S & F in repair Switch Piano Flush type, Single pole, One way 230 volts 15 / 16 Amps

S & F in repair step type electronic fan regulator, - 2 module.

S & F in repair PVC ceiling rose two to three terminals all as specified.

S & F in repair ding dong bell AC, 230 volts, single pole complete.

S & F in repair PVC Gang box suitable for 5 Amp S/S combination

S & F in repair PVC Gang box suitable for 15 Amp S/S combination

S&F in repair Angle holder PVC/polycarbonate type all as specified and as directed

Supply and fixing in repair 600x600mm surface/ recessed mounted LED Light fitting 36 /35 W,glare free uniform illumination acrylic diffuser,connector block etc., complete with all accessories and including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete all as specified and as directed.

Supply and Fixing in repairs LED Tube light fitting 1 x20 W,220V CRCA housing with PC diffuser box type with driver,holder including LED tube light connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal all as specified and as directed.

Supply and fixing in repair round /square shape LED recessed / surface light fitting 15 W complete with drivers ,holders LED lamps including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal Complete all as specified and as directed.

Supply and fixing in repair LED light fitting 10 W surfce type 2 feet long complete with drivers ,holders LED lamps including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal Complete all as specified and as directed.

Supply and Fixing in repairs retro type LED T8 tube with entruded Al body, PC diffuser and inbuilt driver 8 W .Make CG , cat part No- LTT 8-8

Supply and Fixing in repairs retro type LED glass T8 tube in built driver, 20 W .Make CG , cat part No- LGT8-20-865-2

Supply and Fixing in repairs MCB DB SPN 8 way, Double door, 240 V, AC, 50 Hz, with 200Amp rated bus bar

Supply and Fixing in repairs Metal clad switch socket Single pole and neutral enclosure with a two pin and earth plug and socket complete with One single pole MCB SP 20 Amps and fixed in walls Complete all as specified and as directed.

Supply and Fixing in repairs MCB DB TPN 4 way, double door,415 V, AC, 50 Hz,

Supply and Fixing in repairs MCB SP 5 to 32 Amps rating, 10 KA Ç 'curve 240V, 50 Hz AC Complete all as specified and as directed.

Supply and Fixing in repairs MCB SPN 32 Amps rating, 10 KA 'C 'curve, 240V, 50 Hz AC Complete all as specified and as directed.

Supply and Fixing in repairs MCB TP 25- 63 Amps rating, , 10 KA Ç' crve 415V, 50 Hz AC complete all as specified.

Supply and Fixing in repairs MCB TPN 63 Amps rating,, 10 KA Çcurve , 415V, 50 Hz AC Complete all as specified and as directed.

Material and Labour for sub main wiring 1100 volts grade PVC insulated FRLS multistranded copper conductors, two runs of single core 4 Sqmm along with one run 4 Sqmm PVC insulated single core FRLS multistranded copper conductor cable as earth continuity conductor along with one run of PVC medium grade conduit all as specified and as directed. Note :- Three runs of multistranded copper conductor and 1 run of PVC conduit shall be measured as one unit.

Material and Labour for sub main wiring 1100 volts grade PVC insulated FRLS multistranded copper conductors, two runs of single core 2.5 Sqmm along with one run 2.5 Sqmm PVC insulated single core FRLS multistranded copper conductor cable as earth continuity conductor along with one run of PVC medium grade conduit all as specified and as directed. Note :- Three runs of multistranded copper conductor and 1 run of PVC conduit shall be measured as one unit,

Disconnecting the powersupply and taking down Ceiling fan ,Dismantling the defective Ceiling fans motor 1200mm sweep taking to work shop and by taking out burnt copper winding and rewinding with super enamelled copper wire of existing gauge and weight including replacement of all insulation material and other petty items required for making motor functional Complete all as specified and as directed.

Disconnecting the power supply and taking down the exhaust fan , dismantling the defective Exhaust fans motor up 250mm to 300 mm sweep taking to work shop and by taking out burnt copper winding and rewinding with super enamelled copper wire of existing gauge and weight including replacement of all insulation material, and other petty items required for making motor functional Complete all as specified and as directed.

Disconnecting the power supply and taking down the exhaust fan ,/wall mounting fan dismantling the defective Exhaust fans motor up 400 to 450 mm sweep taking to work shop and by taking out burnt copper winding and rewinding with super enamelled copper wire of existing gauge and weight including replacement of all insulation material, and other petty items required for making motor functional Complete all as specified and as directed.

Dis connecting the power supply and taking down the wall mounting fan 300 to 450 mm , taking to work shop and by taking out burnt copper winding and rewinding with super enamelled copper wire of existing gauge and weight including replacement of all insulation material, and other petty items required for making motor functional Complete all as specified and as directed. Note: item No -42 to 45 - Servicing of Fans/Exhaust fans and Spares will be measured and paid separately under relevant items of this schedule.

Material and Labour for Painting of Ceiling fan 1200mm sweep/Exhaust fan up to 450mm complete, at site with synthetic enamel paint by spraying painting including filling cavities with filler,one coat after cleaning Complete all as specified and as directed.

Hanging Only Ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified ,and any addn/alteration /threading if required to down rod shall be done by contractor with out any extra cost Complete all as specified and as directed.

Fixing only Exhaust fan and connecting up including nuts and bolts if required and provison of cable from ceiling rose /connector to fan

Supply Only GM bush suitable for Ceiling fan 1200 Sweep Complete all as specified and as directed.

Supply Only Ball bearings suitable for Ceiling fans / Exhaust fans / Wall mounting fans complete all as specified and as directed. Make: SKF / NBC / TATA .

Supply Only 2.5 MFD Capacitors for the fan in position Complete all as specified and as directed. Make - Usha / CG/ Havells

Supply Only 4 MFD Capacitors of the fan in position Complete all as specified and as directed. Make - Usha / CG/ Havells

Material and labour for repairing /replacing the unserviceable door hinges, rubber beeding of existing distribution board with meter box at various building at IAM OE of size approx 1.2Mx 1.02Mx 0.5M, scraping and removing the old paint , rust and dust ,painting two coat of red oxide over a coat of synthatic smoke gray enamel paint and writting the distribution area of qtr no all as directed at site.

Taking out unserviceable geyser element and Supply & fixing heating element suitable to existing model and make 2 KW Dual clip type/tri angle type / round type with rubber gasket suitable for geysers up to 50 Ltr capacity . Make: Theeta /Elteck.

Taking out unserviceable thermostat and Supply & fixing thermostat clip type (Range 30 C° to 80 C and acting at 70 C°) for geysers up to 50 Lts all as specified . Make: Elcon

Taking out un serviceable PVC connection and Supply & fixing 15mm bore PVC connections with brass nuts 650 mm in length suitable to connect GI pipe 15 mm dia to hot /Cold water outlet of geyser. Complete all as specified and directed by Engr-in- charge .

Taking out unserviceable pressure release valve and Supply & fixing pressure release valves suitable for geyser up to 50 ltrs capacity type asper existing PR valve complete all as specified and directed by Engr-in- charge

Taking out unservice indication lamp and Supply & fixing indicating lamps green / red suitable for geysers up to 50 Ltrs complete all specified and directed by Engr-in- chrge

Taking out the unservieable 3 core wire supply and fix FRLS PVC insulated copper flexible cable 2.5 sqmm , 3 core PVC sheathed,1100 Volts grade complete all as specified and directed by Engr-in-charge

Supply and fix electric water heater storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre,BEE 5 star rated complete with all accessories such as safety valve ,thermostate, NRV PV C hot water connection pipe all as specified and directed by Engr-in- charge

Supply only CFL lamp 4pin 36 W

Supply only CFL lamp 4pin 18W

Supply only CFL lamp 2 pin 18 W

Supply and Fixing in repairs MCCB Triple pole 415 volts 50 HZ AC suitable for current carrying capacity 25 to 100 Amps rating, fixed type with rupturing capacity 16 KA all as specified and directed.

Excavation in trenches in Soft / Loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables etc, getting out and forming bottom surface to required gradient Complete all as specified and as directed.

Excavation in trenches in hard/dense / Loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables etc, getting out and forming bottom surface to required gradient Complete all as specified and as directed.

Returning filling including Spreading levelling watering and well ramming to excavated soil in layers not exc 25 cm thick each Complete all as specified and as directed

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils Complete all as specified and as directed.

Material and labour for riddled Sand Cushioning to cables a layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable Complete all as specified and as directed. Note :- Sand shall be measured after punned down.

S & F sub class B burnt Bricks for cable protection Complete all as specified and as directed

Material and Labour for G.I. tubing light grade of size 50mm bore for protection of cables to be laid under roads, crossings / culverts Complete all as specified and as directed.

Boring of holes under roads,pavement,hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 110mm dia suitable for 0.4 mpa working pressure

Taking out old unserviceable UG cable and Supply & laying 70 Sqmm, 3.5 Core LT UG cable XLPE insulated armoured, heavy duty, in trenches / walls / poles / passing through pipes with multistranded aluminium conductor including lugs / thimbles / ferrules connection, testing and commissioning Complete all as specified and as directed.

Taking out old unserviceable UG cable and Supply & laying 50 Sqmm, 3.5 Core LT UG cable XLPE insulated armoured, heavy duty, in trenches / walls / poles / passing through pipes with multistranded aluminium conductor including lugs / thimbles / ferrules connection, testing and commissioning Complete all as specified and as directed.

Taking out old unserviceable UG cable and Supply & laying 35 Sqmm, 4 Core LT UG cable XLPE insulated armoured, heavy duty, in trenches / walls / poles / passing through pipes with multistranded aluminium conductor including lugs / thimbles / ferrules connection, testing and commissioning Complete all as specified and as directed.

Material and Labour for Straight through joints (Epoxy) heat shrinkable type for UG cable including jointing kit and all accessories complete for making joints suitable for LT UG Cable of Aluminium conductor of size Upto 35, Sqmm 3.5 / 4 core Complete all as specified and as directed. Make:- 3M Code- HSLA - 2/4C or equivalent in Densons.

Material and Labour for Straight through joints (Epoxy) heat shrinkable type for UG cable including jointing kit and all accessories complete for making joints suitable for LT UG Cable of Aluminium conductor of size 50 to 95, Sqmm 3.5 / 4 core Complete all as specified and as directed. Make:- 3M Code- HSLA - 2/4C or equivalent in Densons. Note for ser item No.66 & 67 (i) Earth work excavation, sand cushioning, bricks for protection, GI pipe etc shall be measured and paid for separately under relevant items of this schedule.

Supply and Fixing in repairs MCCB 3 Pole, 415 volts 50 HZ AC suitable for current carrying capacity 160 Amps rating, fixed and thermal magnetic release with rupturing capacity 25 KA all as specified and directed.

Supply and Fixing in repairs MCCB 4 Pole, 415 volts 50 HZ AC suitable for current carrying capacity 200 Amps rating, fixed and thermal magnetic release with rupturing capacity 35 KA all as specified and directed.

Supply and Fixing in repairs MCCB 4Pole, 415 volts 50 HZ AC suitable for current carrying capacity 250 Amps rating, fixed and thermal magnetic release with rupturing capacity 35 KA all as specified and directed.

Supply and Fixing in repairs MCCB 4Pole, 415 volts 50 HZ AC suitable for current carrying capacity400 Amps rating, fixed and thermal magnetic release with rupturing capacity 36 KA all as specified and directed.

Supply and Fixing in repairs Voltmeter digital type 0-500 Volts Complete all as specified and as directed.

Supply and Fixing in repairs Ammeter digital type 0-200 Amps Complete all as specified and as directed.

Supply and laying Synthetic rubber insulating Mats suitable for 11 KV electrical insulation 2 Mtr x 1 Mtr x 2.5 mm thick Complete all as specified and as directed.

Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earth earth strip 25 x 3 mm by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in Electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., Complete all as specified.

Supply Only in repairs 3.5 KVAR Capacitor heavy duty existing make and type 440 volts with inrush current Limiting Coil Complete all as specified and as directed.

Supply Only in repairs 5 KVAR Capacitor heavy duty existing make and type 440 volts with inrush current Limiting Coil Complete all as specified and as directed.

Supply Only in repairs 10 KVAR Capacitor heavy duty existing make and type 440 volts with inrush current Limiting Coil Complete all as specified and as directed.

Supply Only in repairs 15 KVAR Capacitor heavy duty existing make and type 440 volts with inrush current Limiting Coil Complete all as specified and as directed.

Supply Only in repairs 20 KVAR Capacitor heavy duty existing make and type 440 volts with inrush current Limiting Coil Complete all as specified and as directed.

Supply Only in repairs 25 KVAR Capacitor heavy duty existing make and type 440 volts with inrush current Limiting Coil Complete all as specified and as directed.

Supply Only Automatic power factor relay ( APFCR ) 8 stage Complete all as specified and as directed. Make - Neptune

Supply only duty contactor suitable for 25Kvar capacitor

Supply only duty contactor suitable for 20Kvar capacitor

Supply only duty contactor suitable for 10Kvar capacitor

Material and Labour for preperation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint Complete all as specified and as directed.

Supply and fixing moulded (FRP) junction box with IP 65 protection of size 300x200x80mm with 32 Amp 4 way heavy duty terminal block with 6Amp MCB SP and two number of cable entry gland of standard size with suitable stainless steel bracket to fix with pole complete all as directed Make- sintex

Disconnecting the electrical connections and taking down the unserviceable LED Street light fittings of 75/45/25 watts of any type and any make from pole for repair and replacement of unserviceable parts like driver, surg protection etc., and fixing back to the original position after getting repairs including connecting testing and commissioning all as specified and directed by Engr- in- Charge.

Taking out the unserviceable HPSV /CFL street light fitting any watts , Supply and fixing 1x 60 W LED street light fitting with pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection.

Taking out the unserviceable HPSV /CFL street light fitting any watts , Supply and fixing 1x70 W LED street light fitting with pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection.

Taking out the unserviceableflood light fittings and Supply & fixing 1x70 W LED flood light fitting 230V out door type with thermal management in multiple optics and equipped with IP-66 protection with impact and corrosion resistants complete with driver and lamp

Taking out the unserviceable post top latern fitting and Supply & Fixing post top lantern LED type 40 W 230 Volts AC out door type with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant Complete with driver and lamp

Taking down unserviceable bollard fitting and Supply & Fixing LED bollard 10 W in cylindrical shape with opal acrylic diffuser and IP 65 protection.with necessary electrical connection Make CG cat part No- LBLA1-10-CDL or equivalent in PHILIPS/WIPRO

Taking down unserviceable mashroom light fittings ,Supply and Fixing mushroom LED light fitting 16 W die-cast aluminium landscape luminaire for downward lighting with high power led as light source, IP 66 complete all as specified and directed. Make Havells cat par tNo -MUSHROOMBL 16WLED730SSYMTOPCor equivalent in PHILIPS/WIPRO

Taking out old unserviceable UG cable and Supply & laying 16 Sqmm, 4 Core LT UG cable XLPE insulated armoured, heavy duty, in trenches / walls / poles / passing through pipes with multistranded aluminium conductor including lugs / thimbles / ferrules connection, testing and commissioning Complete all as specified and as directed.

Taking out old unserviceable UG cable and Supply & laying 10 Sqmm, 2 Core LT UG cable XLPE insulated armoured, heavy duty, in trenches / walls / poles / passing through pipes with multistranded aluminium conductor including lugs / thimbles / ferrules connection, testing and commissioning Complete all as specified and as directed.

GKR and CO

kamadhenu Electricals

ARUNOTHAYA TRADERS

SREE VARU ELECTRICALS