RENOVATION, MAIN GATE and FENCING OF PANCHAYAT GHAR BLOCK SHANGUS

Enagaement of labours for cleaning of panchayat ghar .

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

P/L of dry Stone soling dully hand packed hand rammed incl stone chippings, all carriages complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge. Made of G.I. wire of dia 3 mm including painting with synthetic enamel paint of approved brand

Providing, fabricating and erecting MS structural steel work for gate frame and shutters using approved steel sections, including cutting, welding, drilling, fitting, fixing, one coat of steel primer, and all incidental charges, complete. (Measured and paid by weight of finished structural steel work.

Providing and fixing 30 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws ,handles,tower bolts etc as per direction of Engineer-in-charge, imported (KD) wood

P/F of glass panes, with wooden fillets wherever necessary :Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)