SPECIAL REPAIR TO BUILDING NO.P-114 AT MARCOS AT TEYLERABAD AND PROVISION OF DUTY OFFICER REST ROOM AT NTS (PBR) TEYLERABAD UNDER GE MINNIEBAY, SRI VIJAYA PURAM

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed by Engineer in charge

M & L 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over 10 mm thick rendering in cemnt 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engineer in charge

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer in charge

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer in charge

M&L for Virified Ceramic tiles (dark shade) 10 mm thick (square/ rectangular) polished, premium quality area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed by Engineer in charge

M&L for Virified Ceramic tiles (dark shade) 10 mm thick (square/ rectangular) polished, premium quality area of each tiles not exceeding 0.36 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed by Engineer in charge

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame) complete all as specified and as directed by Engineer in charge

Taking down chowkats or frames exceeding 1.5 sq.m and not exceeding 4 sqm each with shutters without taking off shutters from the frames and removing off site etc complete all as specified and as directed by Engineer in charge

S&F Plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engineer in charge

S & F 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed by Engineer in charge

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and as directed by Engineer in charge

S & F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S & F Anodised aluminium powder coated grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

Supply only sheet glass, 4.8 mm ordinary quality and glazing with oil putty in square in n.exc 0.5 sq.m in each pane complete all as specified and as directed by Engineer in charge

Supply only 5.0 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane complete all as specified and as directed by Engineer in charge

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed by Engineer in charge

Supply only particle board, 12 mm thick medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed by Engineer in charge

S & F 100 mm size, butt hinges, stainless steel extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed by Engineer in charge

S & F floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed by Engineer in charge

S & F in repair collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed by Engineer in charge

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer in charge

M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair without using extra cement complete all as specified and as directed by Engineer in charge Note: Water proofing compound will be measured and paid separately. Note :Rate inclusive of scaffolding at any height

Supply only Integral water proofing compound complete all as specified and as directed by Engineer in charge

M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer in charge

M&L preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer and 3mm thick wall care putty complete all as specified and as directed by Engineer in charge

M & L for preparation of new surfaces of wall for applying Two or more coats of 100% Premium acrylic emulsion paint of apex ultima having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer in charge Note :Rate inclusive of scaffolding at any height

M & L for preparation of old surfaces of wall for applying two coat of 100% Premium acrylic emulsion paint of apex ultima having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified and as directed by Engineer in charge Note :Rate inclusive of scaffolding at any height

M & L for complete removel of existing treatment on wall & finishing the surface with appliying two coat of oil bound distemper over a coat of primer and 3mm thick wall care putty surface complete all as specified and as directed by Engineer in charge

M&L preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer in charge

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and as directed by Engineer in charge

S&F in repairs 300mm Aluminium alloy, anodised sliding door bolt with haspstaple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer in charge

S & F in repairs Aluminium anodised barrel Tower Bolt of size 100 mm size of extruded section complete all as specified and as directed by Engineer in charge

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed by Engineer in charge

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed by Engineer in charge

M & L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engineer in charge

M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer in charge

Demolition of cement concrete in ground floor and paving nexc 15cm thickness (below or above ground level) complete all as specified and as directed by Engineer in charge

M & L for cement concrete type D- 2, 1:4:8 (40mm graded aggregate) 100mm thick as in sub base complete all as specified and as directed by Engineer in charge

S&F Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over 20mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer in charge

Demolition of Precast Concrete work/ precast concreteblock built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry using PCC, Type C-2 solid blocks, exceeding 10 cm in width and setting in Cement Mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.

M&L for applying polymer modified cement mortar rendering 15 mm average thick in layers CM 1:3 on concrete surface duly mixing polymer modifier of approved make complete finished even and smooth without using extra cement all as specified and as per manufacturer's instructions complete all as specified and as directed by Engineer in charge

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer in charge

M&L for RCC 1:2:4,Type B1 using 20 mm graded aggregate as in column repair/chajja/beam including formwork at any height of existing building complete all as specified and as directed by Engineer in charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil complete all as specified and as directed by Engineer in charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engineer in charge

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engineer in charge

M&L for PCC 1:4:8 type D-2 (40mm graded) as in foundation ,filling and mass concrete complete all as specified and as directed by Engineer in charge

M & L RCC M-30 (design mix) as in beams, tie beam, gable beam cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engineer in charge

M & L RCC M-30 (design mix) as in chajjas complete all as specified and as directed by Engineer in charge

Formwork to sides and soffits of floor or roof beams, tie beam, gable beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed by Engineer in charge

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed by Engineer in charge

M & L for MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips quality conforming complete all as specified and as directed by Engineer in charge

M&L TMT bars 5 to 8 mm mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete all as specified and as directed by Engineer in charge

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each

Supply and fixing sheet glass, 4.8 mm ordinary quality and glazing with oil putty in square in n.exc 0.5 sq.m in each pane complete all as specified and as directed by Engineer in charge

Supply and fixing 5.0 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane complete all as specified and as directed by Engineer in charge

Supply and fixing aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed by Engineer in charge

Supply and fixing particle board, 12 mm thick medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed by Engineer in charge

S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm rudraksh colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer in charge

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 100mm length Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 including srews complete all as specified and as directed by Engineer in charge

S&F aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and as directed by Engineer in charge

S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and as directed by Engineer in charge

S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engineer in charge

S & F Floor Door Stopper of size 150mm of aluminium alloy body and tongue, anodised, with rubber cap complete all as specified and as directed by Engineer in charge

S & F in repair aluminium door seal for snake guard with brush complete all as specified and as directed by Engineer in charge.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300 mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer in charge

M&L for sand filling under floors, cushning under interlocking tiles or in foundations incl watering and consolidations complete all as specified and as directed by Engineer in charge

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer in charge

M&L for PCC 1:4:8 type D-2, 75mm thick using (40mm graded) as sub base including formwork complete all as specified and as directed by Engineer in charge

M&L for Coloured Non-skid/matt finish Ceramic tiles 7 to 8 mm thick exc. 0.11 sqm but n.exc 0.18sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed by Engineer in charge

M&L for Glazed Ceramic tiles 450x300x 8-10 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and as directed by Engineer in charge

S&F aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab, roof truss fixed with suitable size MS hook and fastening bolts etc complete all as specified and as directed by Engineer in charge

M&L 4 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws in ceiling confirming to IS-14862 and fixed with necessary clips complete all as specified and as directed by Engineer in charge

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in charge

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed by Engineer in charge

M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engineer in charge

S & F vitreous china wash hand basin, white flat back of size 630x450mm including 15mm dia CP pillar tap, PVC waste coupling 32mm, chain and plug and PVC waste pipe, PVC connection 45cm long including CI brackets/fixing with fasteners etc complete all as specified and as directed by Engineer in charge

S&F Pillar tap 15mm chromium plated fancy type cast coper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed complete all as specified and as directed by Engineer in charge

S&F 15 mm bore stop/angle valve chromium plasted fancy type cast copper alloy screwed down , high pressure with crutch or butterfly handle fency type complete all as specified and as directed by Engineer in charge

S&F 15mm CP Bib Taps fancy type heavy duty with wall flange complete all as specified and as directed by Engineer in charge (Make : Cat No CON-047KN of Jaquar/T2805C of Johnson/272210030021 of Somany)

S&F 15mm CP 2 Way Bib Cock heavy duty complete all as specified and as directed by Engineer in charge (Make : CON-041KN of Jaquar/T1608C of Johnson/272210150051 of Somany)

S & F CP Health Faucet high quality with 8mm dia, 1.2 Meter long flexible tube & wall hook complete all as specified and as directed by Engineer in charge (Make : Cat No ALD-573 of Jaquar/O1627C of Johnson/272150680051 of Somany)

S&F in reapir CP Towel Rail fancy type high quality 600mm long complete all as specified and as directed by Engineer in charge (Make : Cat No ACN-1111NM of Jaquar/T0250C of Johnson/272130160061 of Somany)

S&F in repair CP Toilet paper holder fancy type high quality complete all as specified and as directed by Engineer in charge (Make : ACN-1151N of Jaquar/T0254C of Johnson/272130160071 of Somany)

S&F in repair high quality CP Towel Ring square with round flange fancy type complete all as specified and as directed by Engineer in charge (Make : Cat No ACN-1121N of Jaquar/T0251C of Johnson/272130190081 of Somany)

S&F PVC waste pipe of size 32mm dia upto 1 Mtre length suitable for wash basin and kitchen sink complete all as specified and as directed by Engineer in charge

S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer in charge

S&F PVC Connection 15 x 450mm size with PTMT Nuts at both ends with rubber washers complete all as specified and as directed by Engineer in charge

S&F Waste coupling 32mm dia of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and as directed by Engineer in charge

S&F Sinks with drainage board made of stainless steel 1mm thick for kitchen with plug washers, waste pipe and coupling includind bedding in cement mortar, two coat iron fixing bracket of required size and connecting union to pipe over all size 1040mm x 510mm bowl size 510mm x 405 mm x 203mm, complete all as specified and as directed by Engineer in charge

S&F vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed by Engineer in charge

S&F brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union, complete all as specified and as directed by Engineer in charge

S&F 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets complete all as specified and as directed by Engineer in charge

S&F 25mm dia aluminum powder coated best quality curtain rails with fixing brackets in both ends complete all as specified and as directed by Engineer in charge

S&F in repair decorative globes for curtain rails to be fixed at both end complete all as specified and as directed by Engineer in charge

S&F in repairs stainless steel plate rack of size 900x 750 x 250 mm made of 1mm thick stainless steel complete all as specified and as directed by Engineer in charge

S&F in repair 100 mm dia CP grating incl joints with solvent cement complete all as specified and as directed by Engineer in charge

Supply and fixing 20 mm outer dia CPVC pipes of pressure rating 10kgf/cm2 fixed complete to walls ,ceiling s or in floors etc complete all as specified and as directed by Engineer in charge

All as per item No. 101.00 here in before but 25 mm bore tube complete all as specified and as directed by Engineer in charge

Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed by Engineer in charge

Supply and fixing 25 mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed by Engineer in charge

Supply and fixing 25 mm outer dia tank Adaptor complete all as specified and as directed by Engineer in charge

Supply and fixing 20mm outer dia union complete all as specified and as directed by Engineer in charge

Supply and fixing 25 mm outer dia union complete all as specified and as directed by Engineer in charge

Supply and fixing 20 mm outer dia Brass Tee complete all as specified and as directed by Engineer in charge

Supply and fixing 25 mm outer dia Brass Tee complete all as specified and as directed by Engineer in charge

S&F PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement complete all as specified and as directed by Engineer in charge

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose of soil, complete all as specified and as directed by Engineer in charge

M & L for 100 mm thick cement concrete with type D2 (1:4:8) using 40 mm graded stone aggregate including formwork complete all as specified and as directed by Engineer in charge

M & L for chequred cement concrete tiles 30cm x30cmx25mm thick with grey cement and pigments, set, jointed and pointed in neat cment slurry in floors over 15 mm thick cement screed bed in CM 1:4 complete all as specified and as directed by Engineer in charge

Excavation over area n.exc 1.5 m in depth and getting out in soft /loose soil complete all as specified and as directed by Engineer in charge

Excavation over area exc 1.5 m but n.exc 3.00 m in depth and getting out in soft /loose soil complete all as specified and as directed by Engineer in charge

M & L PCC 1:4:8 type D2 (40mm graded aggregate) as in foundations, filling and mass concrete including formwork complete all as specified and as directed by Engineer in charge

M & L RCC M-30 (design mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like span complete all as specified and as directed by Engineer in charge

Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping rough finished surface complete all as specified and as directed by Engineer in charge

S & F 20 mm dia MS rungs complete all as specified and as directed by Engineer in charge

M & L for Loose filling with aggregates of gauge 40 to 80mm in soakage pits, soakage wells complete all as specified and as directed by Engineer in charge

Supplying and laying for 150mm dia double wall corrugated (DWC) pipes laid in trenches and jointed complete all as specified and as directed by Engineer in charge

M & L for precast RCC 1:2:4 type B-1 (using 20 mm garaded aggregate) as in cover slab complete all as specified and as directed by Engineer in charge

S & F for 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or tin floors complete all as specified and as directed by Engineer in charge

S & F for 110 mm dia pvc (SWR) bend any radius complete all as specified and as directed by Engineer in charge

S & F 110 dia PVC (SWR) Vent cowl complete all as specified and as directed by Engineer in charge

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed by Engineer in charge

M&L for point wiring with two run of PVC insulated unsheathed mutistranded copper conductor cable of 1.5 sqmm (FRLSH), PVC conduit medium grade/PVC casing caping and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc made of not less than 1mm thick and 6cm depth covered Gl metal flush box and drawing one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor cable (FRLSH) as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and directed by Engr-in-Charge. (In ceiling Portion surface conduit wiring shall be carried out.) Note: The quoted rate inclusive for the following :- (a) Modular cover plate with frame of any module complete. (b) Proper colour coding is to be followed as per IS Specification. (c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.

One light /Fan/Exhaust fan/wall fan point controlled by one switch.

One 3 pin socket outlet 5 Amps on independent board.

One 3 pin socket outlet on same board.

All as per item No. 127.00 here-in-before but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket on independent board and provision of 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed by Engineer in charge

All as per item No.127.00 here -in- before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed by Engineer in charge

supply and fixing in replacement Modular switch 1 way 6A, 220V 50Hz module as per existing make and model complete all as specified and directed by Engineer in charge

supply and fixing in replacement Modular Socket, 6A - 2/3 pin combined ,220V 50Hz 2module as per existing make and model complete all as specified and directed by Engineer-in-Charge.

supply and fixing in replacement Modular Socket, 16A - 2/3 pin combined ,220V 50Hz 2module as per existing make and model complete all as specified and directed by Engineer-in-Charge.

supply and fixing in replacement Modular switch 1 way 16A, 220V 50Hz 1module as per existing make and model complete all as specified and directed by Engineer-in-Charge.

S & F in replacement of ceiling rose, surface type, 3 terminal, 240 V complete all as specified and directed by Engineer-in-Charge.

M&L for Sub main wiring in replacement complete with 2 x 1.5 sqmm, single core, multi stranded copper conductor FRLSH PVC insulated and sheathed cable 1100 volts grade, drawn in 25mm PVC casing caping in surface/PVC conduit on surface (as required) along walls roofs etc including 2.5 sqmmm size FRLSH PVC insulated unsheathed multi stranded copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge. Note (i) All three wire/cable (phase, neutral and earth) should be run through for each individual circuit from the DBs. (ii) Two run/four runs of cable and one run/two runs of earth conductor and PVC Conduit/Casing Caping be measured as one length.

Taking down existing unserviceable fitting any type any size and Supply and fixing in replacement of LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement LED flood light 250 watt 230 V AC outdoor type made up of pressure die cast aluminium housing with toughned glass and high power LEDs and secondary lenses with IP66 protection, with impact and corrosion resistant complete with driver and lamp including 10 KV SPD complete all as specified and directed by Engineer-in-Charge. Make-Crompton Cat part No : CFS-506-250-57-60D-SL-GL-NSG or equivalent in Phillips/havells.

Taking down & Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor.(BLDC) with hook for hanging ceiling fan complete all as specified and directed by Engineer-in-Charge. Note : Old unserviceable fan to be deposited in AGE E/M-II yard.Make- Make- Crompton/havells/bajaj

S & F in replacement of sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 8 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge.Make- Legrand/ L&T/ Scheinder.

M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth strip 25x4mm connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 40 mm dia GI pipe medium grade for protection of GI earth strip and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I. Note: (i) Cost of GI earth strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, PCC chamber pit and test point complete. (iii) Cost of PVC insulated unsheathed copper cable of size 10 sqmm with suitable size of PVC conduit from test point to incomer DB of bldg shall be deemed to be included in the rate quoted for this item.

S&F in replacement of MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of DP RCBO 30 mA 40 Amps SPN complete all as specified and directed by Engineer-in-Charge.

Takng down old unservicable cable and Supply and Laying in replacement of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 25 x 3.5 C sqmm, laid in trenches/floor or fixed on wall/pole complete all as specified and directed by Engineer-in-Charge.

Supply ,laying of teleex DWC (double wall Corrugated) HDPE pipe confirming to IS 16205 (PART-24-2018) of outer dia 50 mm and inner dia 38 mm ,polyethylene including coupler,bends ,cap etc with smooth ineternal and profiled internal and profilrd external surface for non pressure under ground cable complete all as specified and directed by Engineer-in-Charge.

S & F in replacement of GI Tubes, 'light grade' galvanised, with all fitting and laid in floors, under road, pavement or hard standing steel water tubing bore of tube 50 mm complete all as specified and directed by Engineer-in-Charge.

M&L for Sub main wiring with two single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in but including non metallic rigid PVC conduit oe size 25 mm dia ISI marked including PVC FRLSH insulated unsheathed 6 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engineer-in-Charge.

S&F exhaust fan 300 mm sweep compete with louvers including all civil work like cutting and making circular opening in existing wall of kitchen etc ,including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.

BLANK

Supply & fixing electric water heater, storage type, shock resistant & rust proof engineering thermoplastic body, high grade SS inner tank, wattage 2 KW, capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, fastner bolts, 16A plug including stainless steel hose pipe complete all as specified and as directed. Make:- Havells/ Crompton/ Juguar

Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16x4 sqmm, laid in trenches/floor or fixed on wall/pole complete all as specified by Engineer in charge

Supply , fixing & laying GI tubing medium grade of size 25mm bore with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed by Engineer in charge

Supply , fixing & laying GI tubing medium grade of size 20mm bore with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed by Engineer in charge

S&F Gun metal globe or gate valves of size 25mm , conf to IS 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new position all as specified and directed by Engineer in charge

S&F Gun metal globe or gate valves of size 20mm , conf to IS 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new position all as specified and directed by Engineer in charge

Supply and fixing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer, ISI marked hoisting & fixed in position all as specified in SSR part-I of 1000 ltr capacity all as specified and directed by Engineer in charge

M&L for PTMT float valve high pressure with high density plastic ball, with epoxy coated Aluminium rod screwed for iron pipe and fixed in all as specified and directed of size 20 mm bore all as specified and directed by Engineer in charge

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit with in built filter for better indoor air quality with minimum 5 star rating of capacity 1.5 TR including required gas charging complete all as specified and directed by Engineer-in-Charge. (a) The cost of remote with batteries, compressor oil, copper piping, tools & & plants for fixing of outdoor unit at any height and making good disturbed surfaces is deemed to be included in the quoted rate. (b) Drilling of the wall should be done by core cutting machine. (c) Cost of refrigerant gas will be measured and paid separately. Note:- After Engineer-in-Charge

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amps complete all as specified and directed by Engineer-in-Charge.

M&L for air conditioner mounting bracket heavy duty GI steel/MS powder coating finish inclusive of nuts and bolts for mounting the bracket on wall complete all as specified and directed by Engineer-in-Charge.

S&F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of 2.5% and capacity 4KVA complete all as specified and directed by Engineer-in-Charge.

M&L for submain wiring with PVC insulated unsheathed multi-stranded copper conductor cable two run of 4 Sqmm single core (FRLSH) 1100 volts grade drawn through in and including concealed with PVC conduit medium grade of suitable size or surface wiring with PVC casing caping of suitable size and making good the disturbed wall surfaces to match with existing specification and one run of 4 Sqmm PVC insulated copper conductor(FRLSH) for earth continuity wire complete all as specified and directed by Engineer-in-Charge. Note : (i) Three run of cable with one run of PVC conduit/PVC casing and caping will be measured as one length. (ii) The quoted rate inclusive for the following :- (a) Proper colour coding is to be followed as per IS Specification. (b) Test certificates of cables to be submitted before commencement of work/ claiming for payment.(c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping of suitable size as per site requirement.

S&F rigid non-metallic PVC conduit heavy duty 25mm dia inclusive of all fittings and fixing accessories complete all as specified and as directed.

Supply and charging environmental friendly refrigerant Gas or any other as per OEM recommendations

Jas & Co (BID ID -3271759)

M/s K Moorthi (BID ID -3271856)

RPG AND COMPANY (BID ID -3270335)

M/s Harjas Construction & Waterproofing Co (BID ID -3268857)

ANITA VARMA ENTERPRISES (BID ID -3268969)

SKV Engineering (BID ID -3271991)

B S Grewal (BID ID -3269768)