REPAIRS TO BARBED WIRE/CHAIN LINK FENCING, CONCERTINA COIL, COMPOUND WALL, GATES, DRAINS AND CLEANING, MAINTENANCE, REPAIRS OF SEWAGE LINE, SEPTIC TANK, SOAKAGE WELL IN SOUTH CAMP AT AFS SAMBRA

Amount

Restraining resecuring of barbed wire fencing, including making good staples securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. including fixing of existining concerntina coil as directed to any type of standard rails complete all as specified and directed.

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying of existing concertina coil with and provision of galvanised mild steel wire, staples or steel pins etc., complete all as specified and directed.

S&F concertina coil fencing, punched tape, coil 600mm dia having 7 to 8 nos rounds per 1 metre length, fixing on angle iron 'Y' shaped & placed over perimeter wall with GI staples and GI clips to retain horizontal including necessary bolts or GI barbered wire tied to angle iron, etc., complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description complete all as specified and directed.

Dismantling mild steel fencing wire mesh, any type complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum getting out in hard/dense soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L for mild steel work as in posts and struts as in fencing posts including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets including all necessary welding, drilling, bolting or reveting etc and similar work confirming to Fe-290 Gde E-165 all as specified and directed (Note: The quoted rate is inclusive of fixing of flat iron with chain link fencing at top and bottom in horizontal direction with staples/steel pins) complete all as specified and directed.

M&L for PCC 1:4:8, type-D2 (using 40mm graded stone aggregates) as in foundation and filling in mass concrete complete all as specified and directed.

M&L for mild steel screw bolts 5 to10mm dia of neck (machine made) with hexagnal or square heads at one end and scewed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and and not exc 10 cm long complete all as specified and directed

M&L for preparation of new steel surfaces of any discription over 10 cm width and girth and applying two coats of synthetic enamel paint over one coat of red oxide Zinc chromate primer complete all as specified and directed. .

M&L for preparation of new steel surfaces of any discription not exceeding 10 cm width and girth and applying two coats of synthetic enamel paint over one coat of red oxide Zinc chromate primer complete all as specified and directed. .

Fixing only chain link fencing including line wires, any mesh, size and type to any type of strandards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

Supply only mild steel galvanised PVC coated chain link fencing of any size of mesh complete all as specified and as directed.

M&L for preparation of old painted surfaces and applying two coats cement based paint on walls, pillasters, cornices, etc complete all as specified and as directed.

S&F plain galvanised mild steel sheeting 1mm thk for crumple joints and straight flashing fixed with screw to wall all as specified and as directed.

Taking down and refixing plain galvanised mild steel sheeting of any thickness including straightening of bend portion and fixed with screw to wall complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, celing etc incl racking out joints hacking for key, scrubbing down with water etc complete including removing rubbish off the premises complete all as specified and as directed..

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete block wall or concrete surfaces finished even and smooth without using of extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats cement based paint over a coat of chalk whitening on walls, pillasters, cornices, etc., complete all as specified and as directed.

M&L for preparation of old steel surfaces of any discription over 10 cm width and girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old decorative wall surfaces and applying one coats of weather proof paint complete all as specified and as directed.

M&L for framed work such as grills, gratings,etc with ends of bars shouldered and revited of forged into spikes,framed guard bars barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks, false ceilings, and similar work. Fe 290 Gde E-165 complete all as specified and as directed.

M&L for framed work as in doors or gates of angles or other section with gusset plats, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running, rails and guiedes) and hanging; also fastening and fixing complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling etc complete all as specified and directed.

Desilting of existing drains and removal of sludge / harden soil carefully without disturbing side wall including disposal of soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in any position complete all as specified and directed.

M&L for plain cement concrete (1:3:6), type C-1 (using 20 mm graded crushed stone aggregates) as in surface channels and drains including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for plain cement concrete (1:2:4), type B-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and necessary use and waste of form work complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks of mix 1:3:6 (using 20 mm graded crushed stone aggregates) exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for pre-cast reinforced cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone agg as in cover slab set and jointed in CM 1:4 including necessary form work complete all as specified and directed.

M&L for TMT bars of 6 to 8mm dia cut to length bent to shape required including cranking bending spirally for hoping for columns end and binding with mild steel barber wire (annealed) not less than 0.9 mm dia complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends complete all as specified and directed.

Cleaning of sewage line of any dia and including man holes (between manhole to manhole and man hole to septic tank) by rodding with bamboo and gunny bags and removing sludge/debris/night soil from premices etc and cleaning with fresh water complete all as specified and directed.

Cleaning of gully trap/Nahani trap/water closet up to 1st manhole from ground floor to third floor by rodding as directed including refixing of grating in position with white cement and removing the debris as directed including cutting of small vegetables where ever found at site complete all as specified and directed.

Cleaning of septic tank/Soak well by bailing out sewage and night soil / sludge into closed containers and depositing the same outside campus including cleaning the septic tank with water complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC) 150 mm internal dia set in CM complete all as specified and directed. Note:- Excavation work shall be measured and paid seperately.

Excavating in trenches n.exc 1.50 m wide & n.exc 1.50 m depth n.exc 10sqm on plan for foundation or manhole. and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches not exc 1.50 m wide & exc 1.50 m but not exc 3.00 depth and n.exc 10sqm on plan for foundation or manhole. and getting out in hard/dense soil complete all as specified and directed.

Returning filling in including spreading leveling and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated material to a distance exc 50m but not exc 100 m and depositing where directed at a level not exc 1.50m from starting point complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M&L for reinforced concrete pipes, class NP2, 150mm dia, laid and jointed complete with collars complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floor and pavings not exc 15 cm thick (below or above ground level) and removing all the rubbish complete all as specified and directed

Dismantling of stone slabs, tiles and paver blocks of any description or thickness, laid dry or laid dry and pointed in floors, aprons complete all as specified and directed

M&L for 75mm thick plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in sub base of floors complete all as specified and directed

M&L for 50mm thick plain cement concrete, type B1, 1:2:4 (using 20mm graded stone aggregates) as in floor finished even and fair complete all as specified and directed

M&L for PVC dividing strips 38mm width, 4 to 5mm thick, inserted in position conform to design complete all as specified and directed

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drives ways or light traffic parking etc., of required strength thickness and size/shape, made by table vibratory method using over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of interlocking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed

M&L for chequered cement concrete tiles of size 20cm X 20cm X 25mm thick, set jointed and pointed neat cement slurry as in floors with grey pigment cement & pigment to match the colour of tiles laid over and including 15mm thick screed bed in CM(1:6) complete all as specified and directed

M&L for chequered cement concrete tiles of size 20cm X 20cm X 25mm thick, bull nosed, set, jointed and poited neat cement slurry as in floors with grey pigment cement & pigment to match the colour of tiles laid over and including 15mm thick screed bed in CM(1:6) complete all as specified and directed

M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregates) as in coping, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work (straight or curved) complete all as specified and directed.

M/S ADITYA CONSTRUCTIONS (BID ID -3343724)

VISHAL M ENGINEERS (BID ID -3342029)

shree bhavani constructions (BID ID -3345610)

M/S MAHADEV M PATIL (BID ID -3344186)

M/s B C CHOUGULE (BID ID -3345572)

Vinod Enterprises (BID ID -3345784)

AARADHYA ENTERPRISES (BID ID -3344746)