Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.0 LAccepted-AOC 131 SHINGANAPUR ROAD KOLKI KOLKI SATARA MAHARASHTRA 415523 | SATARA | MAHARASHTRA | 415523 | L1 | Accepted-AOC OK | |
| 2 | L2₹49.0 L+₹75,350 (1.56%)Rejected-Finance WZ 409 0 B 1ST FLOOR PLOT NO 12 JANAK PARK HARI NAGAR NEW DELHI 110064 | NEW DELHI | WEST DELHI | DELHI | 110064 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹49.3 L+₹1.1 L (2.33%)Rejected-Finance RZ A2 2 CHANAKYA PLACE PART I OPP C 1A BLOCK JANAK PURI NEW DELHI 110059 | NEW DELHI | WEST DELHI | DELHI | 110059 | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹49.4 L+₹1.2 L (2.52%)Rejected-Finance B 87 SHAM NAGAR KHAYALA ROAD NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹49.5 L+₹1.3 L (2.80%)Rejected-Finance WZ 576 577 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
Refer Docs
EMD Value
₹98,000
Closing Date
19 May 2021, 6:00 pmClosed
GE E/M BASE HOSPITAL DELHI CANTT
GE E/M BASE HOSPITAL DELHI CANTT-110010
PROVN OF MEDICAL GAS PIPE LINE, NETWORK VALVES AND OTHER CONNECTED ITEMS AT BLDG NO. P-113 T-14 T-16 ACUTE CARE COVID-19 ISOLATION WARDS AT BASE HOSP UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10
2021_MES_440206_1
GE/BH-08/2021-22
Limited
Electrical and Maintenance Works
Works
30 days
GE E/M BASE HOSPITAL DELHI CANTT
Class D Category c(i)
6 documents required · 6 mandatory
₹500
GE E/M BASE HOSPITAL DELH CANTT
₹98,000
Yes
2 Jun 2021
5 May 2021
21 May 2021
5 May 2021
19 May 2021
13 May 2021
Amount
Supply, installation, commissioning and testing of 10x10 Oxygen manifold system complete set with non-return valves, Copper tail pipe connections and middle frame complete with chain and fully Automatic control panel complete all as specified and directed. Make: Medrubb Industries/ Med Line/ MEC/ MPS/ Modular Health Care System (MHS)/ MR Engg Pvt Ltd
Supply, installation, commissioning and testing 01x01 Cylinder Oxygen emergency system with non-return valve, Copper tail pipe connection and middle frame with chain regulator complete all as specified and directed. Make: Medrubb Industries/ Med Line/ MEC/ MPS/ Modular Health Care System (MHS)/ MR Engg Pvt Ltd
Supply, installation, commissioning and testing outlet point front insertion type (on line servicing) outlet point with non-return valve for easy maintenance outlet point for Oxygen service with stainless steel probe 304 grade complete all as specified and directed. Make: Medrubb Industries/ Med Line/ MEC/ MPS/ Modular Health Care System (MHS)/ MR Engg Pvt Ltd
Supply, installation, commissioning and testing metal body BPC flow meter complete all as specified and directed. Make: Medrubb Industries/ Med Line/ MEC/ MPS/ Modular Health Care System (MHS)/ MR Engg Pvt Ltd
Supply, installation, commissioning and testing humidifier bottle (0 - 15 litres) Adult complete all as specified and directed. Make: Medrubb Industries/ Med Line/ MEC/ MPS/ Modular Health Care System (MHS)/ MR Engg Pvt Ltd
Supply, installation, commissioning and testing steel probes for gas outlet points complete all as specified and directed. Make: Medrubb Industries/ Med Line/ MEC/ MPS/ Modular Health Care System (MHS)/ MR Engg Pvt Ltd
Supply, installation, commissioning and testing of copper pipes which shall be drawn half hard temp., solid drawn, seamless, phosphorous deoxidized, non-arsenic and degreased copper pipe conforming to EN 13348: 2001 and chemical composition as per BS-6017 of 1981 table 2. The supplies of copper pipe would be accompanied with manufacturers test certificate for the physical properties of copper pipes and their Chemical composition for the following sizes complete all as specified and dirtected:- Make- Star/ Diamond/ Easy flow
15mm x 0.9mm
28mm x 0.9mm
42mm x 1.2 mm
Supply, installation, commissioning and testing Isolation ball valve with both sides end fittings for following pipe sizes:- Make- ANERGY/ DANFOSS/ HONEYWELL/ SIEMENS
Supply, installation, commissioning and testing of Microprocessor based Digital Line Services complete all as specified and directed.
Supply, fabrication & fixing MS angle or tee section, etc cut to lengths for fabricating Oxygen manifold Barricade of size 25 feet x 4 feet x 8 feet (LxBxH), using FE-410W grade 250 quality A, with 4 mm dia galvanised steel wire 150 X 100 m mesh, made up into mattresses or cages, lapped, wired and laid in position including closing after filling with provision of gate having lock and key arrangement, including S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour, having tensile strength of 550 Mpa as in roof covering for Gas Manifold enclosure, including M&L for hard core and PCC type B-2 , 1:2:4, (using 40mm graded stone aggregate) 100 mm thick in Sub base of floor of size 25 feet x 4 feet (LxB) including applying two coats of synthetic enamel paint over and including one coat of red Oxide primer on all steel exposed surfaces complete all as specified and as directed.
Note for Srl item No. 1 to 10: (i) The Contractor shall be responsible for carrry out comprehensive maintenance for BOQ item No 1 to 10 above including replacement of all parts required to be replaced for the one year from the date of completion of work. The Contractor shall submit a letter from OEM/ auth vendor in this regards to Engr-in-Charge with copy to User duly endorsed mobile No of the authorised rep to whom the complaints can be logged. The unit rates quoted against this item shall deemed to be including above provision and nothing shall be paid extra on this account. (ii) The Contractor has to submit FDR for One year an amount of Rs 1,50,000.00 failing which shall be kept reserved from the 1st RAR/ Final Bill as the case may be as a gaurantee for effective functioning of complete system. (iii) The complete system shall be handed over to the Users immediately on completion of work for their use for COVID patients. (iv) Necessory T&P and Oxygen/ Nitrogen including other resources as required for testing will be provided by the contractor and cost for same are deemed to be included in the quoted rates.
Supply and fix of tool Adjustable Spanner of size 305mm ( 12 inch)open end wrench, near Oxygen Mani fold for opening of Oxygen cyclinder tail pipe and day to day maintenance complete all as specified and as directed. Make- Taparia HSN code- 8204 or equivalent Model in make Tata Agrico/ Stanley
Supply and fix of box spanner socket set (17 Sockets & 6 Accessories) near Oxygen Manifold for opening of Oxygen cyclinder tail pipe and day to day maintenance complete all as specified and as directed. Make- Taparia HSN Code No. 8024 or equivalent model of make Tata Agrico/ Stanley
Supply and fix tail piece pipe suitable for connection of oxygen cylinder to Gas manifold complete all as specified and directed.
Supply and fix oxygen pipe line route indicator made from jodhpur stone size 4 ftx 2 ft x 2 ft duly painted with green colour and letter written " liquid oxygen line" on both surface of stone complete all as specified and directed by Engr-in-Charge.
Excavating in post holes in soft/ loose soil (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified & directed.
M&L for cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in foundations, filling and mass concret etc complete all as specified & directed.
Removing excavated materials to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specifed & as directed.
S&F Steel work as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc Fe-290 (Gde E-165) complete all as specified and directed.
S&F Mild steel bolts with washer not exc 12 mm dia purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long with MS angle Iron and similer articals complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces, width or girth exc 10cm including necessary preperation of surfaces complete all as specified and as directed.
M&L GI Powder coated 300 mm width portable cable tray fixing with MS angle welded/ bolted complete all as specified and as directed.
Flint India
RUCHIKA ENGG.WORKS
New Era Engineers
Shiv Enterprises
M/S Rohit Enterprises
Iconic Engineers
Saini Enterprises
DP Traders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .