Chandigarh

Active

Works

Electrical Works

Providing 11 kV Sub-Station for Charging Infrastructure of E-Buses at Bus Depot cum Workshop, Raipur Kalan, Chandigarh.

Chandigarh Administration

Chandigarh

Amount: ₹4.7 CrCloses: 1 Oct 2026

Timeline

Published18 Sept 2026
Pre-Bid Meeting23 Sept 2026
Submission Opens23 Sept 2026
Closes1 Oct 2026
Bid Opening1 Oct 2026

Tender Value

₹4.7 Cr

EMD Value

₹9.4 L

Closing Date

1 Oct 2026, 3:00 pm

Tender Inviting Organisation

Name

Er. Gurpreet Singh Bains

Address

Executive Engineer, Electrical Division No. 2, 1st Floor Additional Deluxe Building Sector- 9/D, Chandigarh.

Work Description

As per NIT

Tender Information

Tender ID

2026_CHD_95584_1

Reference Number

E2/26/113

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Percentage

Period of Work

90 days

Location

Chandigarh

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

3 documents required · 3 mandatory

Fee

RequiredShall contain copy of UTR No./ Transaction Receipt of deposition of online EMD. (.pdf)

PreQual/Technical

RequiredDocuments related to Eligibility Criteria (.pdf)

Finance

RequiredFinancial Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹9.4 L

Pre-Bid Meeting

Meeting Place

Chandigarh

Important Dates

Last Activity

18 Sept 2026

Published

18 Sept 2026

Bid Opening

1 Oct 2026

Download Starts

18 Sept 2026

Download Ends

1 Oct 2026

Submission Starts

23 Sept 2026

Pre-Bid Meeting

23 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (20 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1DSR item No. 3.13: Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Busbar Trunking for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required.
1.01	3200 A, Isc= 50kA for 1 sec	100	PM	58,373	₹58,37,300
2	DSR item No. 5.6: Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.	14	Each	15,004	₹2,10,056
3	DSR item No. 5.8: Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)	320	PM	1,024	₹3,27,680
4DSR Item No. 23.4 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:
4.01	120 sq. mm	12	Each	15,989	₹1,91,868
4.02	400 sq. mm	4	Each	17,414	₹69,656
5DSR item No. 24.4.4 (11/0.433 KV, 3 Phase, 50 Hz outdoor/ indoor mounting (Mineral oil filled) (Please refer DNIT for complete specification of item no.5)
5.01	2000 KVA	6	Each	34,98,342	₹2,09,90,052
6	DSR item No. 2.22 Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.	20	Each	340	₹6,800

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 34.45 MB

Work Item Documents

BOQ_117411.xls

BOQ • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1DSR item No. 3.13: Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Busbar Trunking for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required.
1.01	3200 A, Isc= 50kA for 1 sec	100	PM	58,373	₹58,37,300
2	DSR item No. 5.6: Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.	14	Each	15,004	₹2,10,056
3	DSR item No. 5.8: Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)	320	PM	1,024	₹3,27,680
4DSR Item No. 23.4 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:
4.01	120 sq. mm	12	Each	15,989	₹1,91,868
4.02	400 sq. mm	4	Each	17,414	₹69,656
5DSR item No. 24.4.4 (11/0.433 KV, 3 Phase, 50 Hz outdoor/ indoor mounting (Mineral oil filled) (Please refer DNIT for complete specification of item no.5)
5.01	2000 KVA	6	Each	34,98,342	₹2,09,90,052
6	DSR item No. 2.22 Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.	20	Each	340	₹6,800

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1DSR item No. 3.13: Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Busbar Trunking for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required.

1.01

3200 A, Isc= 50kA for 1 sec

100

58,373

₹58,37,300

DSR item No. 5.6: Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Each

15,004

₹2,10,056

DSR item No. 5.8: Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

320

1,024

₹3,27,680

4DSR Item No. 23.4 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:

4.01

120 sq. mm

Each

15,989

₹1,91,868

4.02

400 sq. mm

Each

17,414

₹69,656

5DSR item No. 24.4.4 (11/0.433 KV, 3 Phase, 50 Hz outdoor/ indoor mounting (Mineral oil filled) (Please refer DNIT for complete specification of item no.5)

5.01

2000 KVA

Each

34,98,342

₹2,09,90,052

DSR item No. 2.22 Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Each

340

₹6,800