Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹13.6 L+₹83,029.88 (6.48%)Rejected-Finance | L2 | Rejected-Finance Being L2 |
Tender Value
₹14.4 L
EMD Value
₹28,900
Closing Date
19 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JODHPUR
HQ CWE AF JODHPUR
85947 E8 Provision of Servo Stabilizer at Admin Site at AF station Jaipur
2022_MES_564442_1
85947/E8
Open Tender
Miscellaneous Works
Item Rate
240 days
AGE I AF JAIPUR
AS PER NIT
7 documents required · 7 mandatory
₹500
AGE I AF JAIPUR
₹28,900
Yes
25 Feb 2023
22 Nov 2022
21 Dec 2022
22 Nov 2022
19 Dec 2022
6 Dec 2022
22 Nov 2022 - 22 Nov 2022
Amount
Excavation in trenches n exc 1.5m wide and not exc 1.5m depth , for foundation etc or for shafts ,manholes, etc not exc 10 sqm on plan and not exc 1.5m depth and getting out in hard/dense soil complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) all as specified by Engg -in- charge.
Removing excavated material n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.
Returning filling including spreading, levelling watering and well ramming in layer not exc 25 cm thick complete all as specified.
M&L for Reinforced cement concrete in nominal mix 1:2:4 Type B1 (using 20mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams, bases for column complete all as specified
M&L for Reinforced cement concrete in nominal mix 1:2:4 Type B1 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressumers, lintels over 1.5m span complete all as specified
M&L for Reinforced cement concrete in nominal mix 1:2:4 Type B1 (using 20mm graded stone aggregate) as in Columns, Pillars, piers, posts and struts complete all as specified
M&L for Reinforced cement concrete in nominal mix 1:2:4 Type B1 (using 20mm graded stone aggregate) as in Slabs supported on walls beams and columns in floor, roofs, lands complete all as specified
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified and as directed.
All as per item No 10 here-in-before but 6 mm to 8 mm dia complete all as specified and directed.
All as irem No 10 but 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binder complete all as specified and directed.
Form work to sides of concrete foundation,footings,bases of columns raft and raft beams,sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter, flat rough finished surface of concrete and similar type of work etc complete al as specified.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finish flat surfaces of concrete, complete, all as specified and as directed.
Formwork to sides and sofits of floor/roof beams, beam haunchings, lintels, cantilevers, shalves including supports, overhangs, etc also splays between floors and beams etc rough finished surfaces of concrete complete all as specified and directed.
Form work of square or rectangular to sides of pillars,posts struts piers,columns and stanchions rough finished surface of concrete and similar type of work etc complete al as specified.
M&L for machine cut kota stone slab flooring in steps and floor , 18-20 mm as in flooring over and including 20 mm thick screed bed in CM 1:4 and jointed with cement slurry mixed with pigment to match the shade of slab including rubbing, moulding complete all as directed.
M&L for Kota stone slab 12-15 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with cement slurry mixed with pigment to match the shade of slab including rubbing, moulding complete all as specified and directed.
M&L for machine cut kota stone (1.20 m to 1.50 m single piece) as in window cill, 18-20 mm thick over and including 20 mm thick screed bed in CM 1:4 and jointed with cement slurry mixed with pigment to match the shade of slab including rubbing, moulding complete all as directed.
S&F Steel rolling shutters of 1.25 mm thickness of laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type complete all as specified and directed.
M&L two coats of synthetic enamel paint over a red oxide primer including prepration of newly treated steel surfaces of girth exc 10cm complete all as specified and directed.
S&F steel windows with side hung shutter including projecting type hing with steel handle and steel pag stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.
All as per item no 22 here in before but without glazing bars.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S&F Stainless steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tank or galvanized wire staple complete all as specified and as directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 5 mm thick in mortar 1:4 on ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of new plastered external surfaces of wall and applying two coats of cement base paint over a coat of cement base primer (colour and shade as approved), complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.
M&L for plain cement concrete type B0 (1:2:4), 12.5 mm graded stone aggregate as in roof for pedding concrete,rounded or chamfered on edges complete all as apecified and directed.
S&F APP based polymeric water proofing membrane of weight not less than 3kg/sqm over a coat of bitumen 85/25 @ 1.20kg/sqm over a coat of bituminous primer @0.30lit/sqm over 10mm thick cement plaster 1:3 over the surface, including two coats of aluminum paint complete all as specified and as directed.
M&L for hard core of broken stone / boulder gauge not exc 63mm and consolidated thickness 15cm spreading, levelling and rammed to true surface
M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor, complete, all as specified and as directed.
M&L for rubber moulded cement cnoncrete Chequered tiles 25cm X 25 cm X 25mm thick with coloured cement and white pigment laid over 20 mm thick screed bed or bedding in CM 1:6 in floor finishes complete all as directed by Engr-in-Charge.
M&L for point wiring with PVC insulated multi stranded cable with copper conductor of size 1.5 Sq mm single core 1100 volts grade ISI mark drawn through non metallic rigid PVC conduit including necessary accessories like bends, tees, elbow, etc fixed on wall/ceiling including second class hard wooden board /sunken type MS box of suitable size with plastic laminated white coloured sheet top cover 3 mm thick including 1.5 Sq mm PVC insulated copper conductor earth continuity wire for:- (a) One Light/fan point controlled by one way switch.
S&F switch flush type 230 volts , 5 Amps, single pole two way complete all as specified and directed.
S&F exhaust fan, steel body AC single Phase. 230V of size 450mm sweep Heavy duty with, blades, and frame and louvers complete all as specified and directed.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F LED lights fitting 1x 20W, 220V, AC with driver, holder including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply, installation and Testing of Servo Voltage stabilizer (Oil type ONAN cooled), 100 kVA Three Phase, 50 Hz., for 'Automatic Controlling / Regulating of Voltage Comprising Auto Transformer, Buck & Boost Transformer(Copper Wound with New Filtered & Dehydrated Transformer Oil), Servo Motor, Auto Controlled Solid State Control Circuit (suitable for supply from D.G. Sets also) and other Fittings & Accessories as under:- Voltmeter (0-300 V) to read input/output voltage per phase, Mains/Low/High limit Indicators, Manual Increase/Decrease Push Switch, Auto/Manual mode control switch and output adjustment, suitable for indoor installation. Note:- (i) stabilizer should be suitable for both Unbalanced/Balanced supply and Unbalanced/Balanced loads (ii) Input Voltage Range Single phase (175-280V) Three Phase (300-480V) (iii) Out put Voltage Range Single phase (240±1%V) Three Phase (415 ±1%V)
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core complete all as specified and directed .
Excavation in trenches not exc 1.5 mtrs wide & not exc 1.5 mtrs in depth for taking out/laying of pipes/cables etc & getting out in soft/loose soil complete all as specified and directed .
Supply and laying double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall for protection of underground cables of size. Outer dia of pipe 63 mm Inner dia 50 mm with all fittings. laid in trenches / road/ nallah or fixed along wall,poles or laid under floor for cable protection all as specified and directed. Note: 1 Cost of iserting cable in pipe deemed to be included in quoted rate. 2. excavation and earth work shall be measured and paid separately.
M&L for earthing complete with copper earth plate electrode in any type of soil with copper earth plate electrode size 30 cm x 30 cm x 3 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to copper earth strip 20 x 3 mm by means of bolts nuts check nuts and washers of copper/brass all as shown in electrical plate No.3 of MES SSR Part-1 connected to main switch board or main control board all as specified and including testing on completion including provision of earth strip protected by galvanised iron 25 mm dia. light grade pipe and watering pipe shall be 20 mm bore medium grade PCC pit with pre cast RCC cover, charcoal/salt funnel etc. complete all as specified and directed by Engineer-in-Charge. NOTE : (i) Earth resistance value should be less than 2 Ohms (ii) Item includes the cost of 7.5 m GI pipe for protection of earth strip.(iii) PCC pits shall be provided atleast 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends , elbows etc. shall be deemed to be included in the quioted rate.(iv) Item includes the cost of 7.5 mtr length copper earth strip 20 x 3 mm complete all as specified and directed. (v) Excavation and earth work measured and paid separately.
S&F ON LOAD change over switch 415V, AC, 4P in sheet steell enclosures of capacity 250 Amps complete all as specified and directed.
S&F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete all as spd and directed.
Choudhary Traders and Engineers
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .