SPL REPIAR TO BLDG NO T-1233, T-1235, T-1256 AND TC-88 OF 405 LT AD REGT (SP) UNDER GE HISAR AT MIL STN HISAR

Dismantling floor, hearth or wall tiling/granite including cement mortar bedding (but not backing) removing, serviceable tiles to stone and rubbish off the premises all as specified and directed.

Dismantling asbestos cement / GI (corrugated, semi corrugated etc) sheets in roof covering of any description complete

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall / as window chajja, fixed with shelf tapping screws as specified complete

M&L for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

S&F Rolled Mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 stance ieces, cleats etc complete all as specified & directed.

S & F rolled mild steel sections angle/ tubular/ square/ rectangular confirming to Fe 410 - W as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified & directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including hangers an grid complete all as specified & directed.

S&F, GI powder coated snap grid of sizes 605 mm x 605 mm frame work for false ceiling with main tee 32x24x1mm thick, cross tee 26x24x1mm thick and wall angle 24x24x1mm thick, flange covered with PVC thin sheet including gypsum board 7-9 mm thick, duly finished surface (thin PVC layer on gypsum board as per manufacturer instructions) size 600mm x 600mm and the same to be placed in snap grid as in false ceiling and Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surfaces 450x300 6 to 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 on other then fair faces of brick work etc complete all as specified and directed.