Construction of CC road and drain from Jalaun Road to the culvert on Kalidas Marg in Orai city

Providing, laying spreading and compacting stone aggregates of specific sizes to water bound macadom specification including spreading in uniform thickness hand packing, rolling with smooth wheel roller 80 - 100 KN in stages to proper grade and camber, apploying and brooming, stone screening to fillup the interstices of coarse aggregate, watering and compacting to the required density .Grading-3 as per technical specification class 405

Construction of un-reinforced, dowel jointed, at expansion and construction Joint only, plain, cement concrete pave ment, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as oer clause 1501.2.2 M-30 (Grade) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side formwork (steel channerl, laying and fixing of 125 micron thick polythene film, wedgesm steel plates including levelling the from work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, do wek bars, near approaches to bridge/culvert and construction joints admixtures as approved, curing of concrete slabs for 14- days curing compund (where specified) and water finishing to lines and grade as per drawing and technical Specification Clause 1501

Earth work in excavation in Foundation in B.C. soil Lead up to 30 m and lift up to 1.50 m I/C all complete as per directed by Engineer in charge.

Filling of Stone Dust having P.I. less then 5 in foundation or for stabilization of sub grade I/c all completion of work.

1:3:6 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

Brick Masonary in 1:4 cement & fine sand mortar in foundation and plinth as per drawing ans as per direction in charge all complete .

Plastering with cement mortar 1:4 (cement & fine sand mortar) 15 mm thick on brick work in substructure as per technical Specification Clause 613.4 and 1204.

P.C.C. work in 1:2:4 cement, coarse sand and 20mm gauge stone grit including all complete work etc. 11.4 MORD (iii) Specification 802, 803, 1202 and 1203

R.C.C. work in 1:1½:3 (M-20 foundation and plinth level) cement, coarse sand and 20mm gauge stone grit including all complete. (as per MORD) 11.4

M.S. or iron work (Tor or plain bar) in plain work such as R.C.C. /R.B. work I/c all complete as directed by engineer in charge. as per mord 11.7