Supply of Material and Machinaries The Construction of Sanjeevini Shed in Kannal Village of Athani Taluka

ATN25 Providing and removing centering, shuttering, strutting, propping etc., for BEAMS

ATN28 Providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for ROOF SLAB

ATN29 Providing Matti / Nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, HOM of machineriescomplete as per specifications.

ATN39 Providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications.

ATN26 Providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for CHEJJA

ATN36 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster

Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton

Providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications

providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings

Providing and fixing glazed Vitrified tiles of approved make, quality and colour of size 600x600x10mm thick

Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm

Providing and fixing in position brass bib cock of approved quality 20mm nominal bore

ATN40 Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x440mm with integral type footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern ( all areapproved make ) with fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps, overflowarrangements with special and 25mm mosquito proof coupling of approved design, painting of fittingsand brackets, cutting and making good the wall and floor wherever including cost of material

ATN41 Providing and fixing white vitreous china clay, flat back wash basin size 550x400mmwith a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32 mm C.P. brass waste of standardpattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required,including cost of materials, labour complete as per specifications.

Ceramictiles 30x 30 cms MORB25

PVC pipe of 4kgcum75 mm MORb35

Broken stone aggregate 40 mm size SHGMATAMARII0609

Broken stone aggregate 20 mm size SHGMATAMARII0609

Broken stone aggregate 12 mm to 10 mm size SHGMATAMARII0609

Coarse sand zone III SHGMATAMARII0609

Portland Cement SHGMATAMARII0609

Plasticizer super plasticizer SHGMATAMARII0609

Burnt bricks class 35 non modular SHGMATAMARII0609

Solid Concrete Block 40x15x20 cms 5Nsqmm SHGMATAMARII0609

TMT bars Fe 500 SHGMATAMARII0609

PVC pipe of 10kgcum110 mm

PVC pipe of 6kgcum 63 mm

ATN11 Binding wire

ATN13 Rubble stones

ATN14 Bond stone 20 x 20 x 45 cm

ATN15 Mixer (concrete small used in culvert)

ATN7 Mixer (concrete) - 1 cum Capacity

ATN9 HOM of Vibrator 0.71 days

ATN46 Providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, HOM of equipments and testingcomplete as per specifications.(For 1000 litre capacity) as per IS 12701 1996. Specification No.KBS13.22

Providing and fixing in position fully panelled Honne wood shutters for doors, styles etc

Supply and fixing of door frame made of hollow extruded PVC Section (Nandi or Equivalent) having dimension of 40x46mm etc

PVC DOOR SHUTTER (Nandi or Equivalent) Supply and fixing of door shuttersmade of rigid PVC extruded hollow section (Nandi or equivalent) o f 20mm x 200mm etc

Providing and laying reinforced cement concrete pipe NP2