PROVN OF 02 X UNISEX TOILETS NEAR MAIN GATE AND PHALKE CIRCLE AT CME PUNE

Amount

Earth work in excavation in all kind of soil by mechanical means(hydraulic excavation)in foundation trenches or drains ,n.exc 1.5 m width or 10 sqm on plan including dressing of sides and ramming of bottoms ,lift upto 1.5m including getting out the excavated soil and disposal of surplus soil to a lead with in 50 m all as directed.

All as per item No 01 above,but in ordinary rock

M & L for Spreading and levelling in layers n exc. 25 cm thick, well ramming including watering as required

M & L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M & L Cement concrete in foundations, filling and mass concrete, type D2(1:4:8) (40mm aggregate)

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified as directed by the engr in charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides of soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygonal for rough finished surfaces of concrete complete all as specified and directed.

Formwork to sides and soffits of beams, linels, cantilevers, shelves incl supports, overhangs, etc also splays between floors and beams, etc and similar work, for flat rough finished surfaces of concrete complete all as specified and directed.

S&F MS work as in roof uss(framed),trussed,purlins,including cleats etc all as specified(Fe 410W,Gde E 250,Quality A)

M&L Reinforced cement concrete M-25 in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete omplete all as specified and directed.

M&L Reinforced cement concrete M-25 as in columns, pillars, piers postsand structs complete all as specified and directed.

M&L Reinforced cement concrete M-25 as in Beams, cantilevers, bressumers, lintels over 1.50 span complete all as specified and directed.

S&F mild steel work as in grills,ladders etc conforming to Fe 290,E 165

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips TMT bars complete al as specified and as directed.

S&F Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binder mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips TMT bars complete al as specified and as directed.

S & F powder coated aluminium frame for windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M & L for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

Supply and fix butt hinges aluminium alloy,C-22,125mm all as specified and directed

Supply and fix Aluminium anodized barrel tower bolts of extruded section, 125 mm long all as specified and directed.

Supply and fix Aluminium handles, cast type, anodized, 150mm size all as specified and directed.

M & L for 75 mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) under floor complete all as specified and directed.

M & L for coloured non-skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over 15 mm thick screed bed 1;6.

M & L for coloured glazed ceramic tiles in vertical surface 600x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick back coat in CM 1:4 all as specified and directed.

M & L Granite black in colour,18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms , for wall lining , urinal partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete

providing edge moulding to 18-20mm thick granite stone slab of any descreption including machine polishing to edge to give high gloss finish etc complete.

S&F medium grade GI tubing 20mm dia with all fittings laid in floors or fixedto walls all as specified

All as per item no 29 above but 15mm dia

Supply and fix for 110mm dia PVC (SWR) pipes single socketed in any length with rubbing ring joints fixed to walls complete.

Supply and fixing of 110mm dia PVC (SWR) bends for any radius complete.

Supply and fixing of 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete

Supply and fix for 75 mm dia PVC (SWR) pipes single socketed in any length with rubbing ring joints fixed to walls complete.

Supply and fixing 110 mm PVC (SWR) vent cowl complete.

Supply and fixing of 75mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete.

All as per item no 32 above,but 75mm dia

S&F PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement in repairs complete all as specified.

Figured glass 4mm thick ,pin head type with putty in squares n. exc 0.50 sqm in each pane

S&F push cock bib taps fancy type cast copper alloy chromium plated suitable for 15mm bore pipe

S & F fancy type chromium plated Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch jor butter fly handle, screwed both ends for iron pipe or for unions complete.

S&F 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete

Supply and fix bib tap, chromium plated, cast copper alloy, crutch or buttrfly handle, screwed down, screwed for iron pipes or brass ferrule, 15mm bore,complete all as specified and directed.

Supply and fix MS plates(plain or chequred)channels,square cut or notched ,forming holes without any attachment(Fe 410-W,Gde E 250,quality A)

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

M & L for 600mm long Towel Rail of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F Toilet paper holder stainless steel recessed type fixed to walls with chromium plated (CP) brass screws

S&F PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified.

S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed.

S&F Vitreous China Urinal, full stall type, white with flush pipe complete all as specified and as directed.

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete in all respect all as specified.

S & F vitreous china washed down water closed pan (pedestal pattern) white with PVC seat cover all as specified and directed

S&F for Rotational moulded polyethylene water storage tanks(double layered) of capacity 1000 litres (cylindrical vertical with closed top) hosted and fixed in position all as specifified in SSR Part-I.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete

M&L Rendering 15mm thick on fair faces of brick work or concrete surface, in cement mortar 1:4 finished the surface even and fair complete, all as specified

M&L Rendering 10 mm thick on fair faces of brick work or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement , complete, all as specified

M&L for preparation of new plastered surfaces and applying two coat of cement base paint over one coat of chalk whiting on wall after complete removal of existing treatment all as specified.

M & L for prepartion of new plastered surfaces and applying two coat of oil emulsion distemper over a coat of alkali resistant cement primer on wall complete all as specified and directed.

M&L for prepration of new steel surfaces of any description not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer all as directed by Engr-in-charge.

M & L for 75mm thick plain cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) laid in alternate bays (not exc 2 sqm each) as in plinth protection, finished the surfaces even and smooth without using extra cement, incl making joints 10mm wide and 30mm deep at spacing not more than 2.50 mtr and at corners and as mandatory and filled with 1 part of bitumen mixed with 3 parts of sand along with wall and in between bays complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete.

S&F vitreous china coloured table top wash basin 450 mm dia including long body swan neck chromium plated fancy pillar taps 15mm bore with PVC waste pipe,brass CP coupling over granite slab of 18-20mm thick,black in colour of size 600x750mm including providing holes on granite slab for coupling and pillar taps etc all as directed

S & F bib tap CP two way 15mm dia (make Jaquar)

S&F pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.50mm thick all as specified

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in in CM 1:4

S&F mild steel screw bolts(machine made)with hexagonal or square heads with washers,length of bolts exc 10 cm but n.exc 15 cm and dia of neck 5 to 10 mm

S&F ,Fe 410-W,Gde E-250,quality A, structural steel work as in staging for water tanks all as specified

Material & labour for concealed point wiring for light Point with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC conduit of Size not less then 20 mm dia . medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, Suitable Size modular sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc with 3mm thick plastic laminated sheet top cover Plate for Fixing modular switch socket fan regulator etc concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed. For the following.

(a) One light point controlled by one switch

(b) One exhaustFan point controlled by one switch

S&F switch Modular, one way 6 amps, 1 module withcomplete all as specified and directed.

S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block all as specified and directed.

Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder cluding LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED lights fitting 1x '2 feet 10 watt 220V,AC decorative box type with driver, holder cluding LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED lights fitting 1x 1 feet 05 watt Mirror Type 220V,AC decorative box type with driver, holder cluding LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing Service bracket made up of GI tubing light grade of size 32mm dia bore for 1.2 mtr long one nos of 45* bent suitable size of nut bolts, two nos of clamps one coat of primer & two coat of paints, Complete all as specified and directed.

Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings Complete all as specified and directed.

Supply and fixing LED Bulb 9 Watt

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm Complete all as specified and directed.

S & F of 8 way SPN DB 200 A rated bus bar made of CRCA sheet, RAL 9003, powder coated for IK-09 double door, IP-43 metal door, confirms to IS-8623-1, IEC 61439-1&3, 240 v, ready to use DB insulated phase busbar, neutral bar's with shroud's, earth bar, sticking saddles, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates & circuit identification label with provision for DP, MCB as incomer & SP MCB's as outgoing Complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning Complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN and current carrying capacity 32Amp in the MCB DB complete with connection testing and commissioning Complete all as specified and directed.

Material & labour for earthing complete with galvanized steel earth electrode plate of size 60x60x6mm thick buried directly in ground/earth pit not less than 2.25 mtr deep below normal ground level and top edge of earth electrode not less than 1.5 mtr below normal ground level and connected with GI earth wire of size 4 mm by means of nut, bolts, washers etc to eqpt/machinery all as shown in electric plate No 3 of SSR Pt I including PCC (1:3:6) pit, pit cover 50mm thick RCC 1:2:4 type B-1 using 8mm tor steel bars @10cm C/C both ways, 20 mm bore medium grade GI protection pipe, watering pipe 20mm bore medium grade, funnel, wire mesh, also including earth work, common salt, charcoal dust complete, including taking down old unserviceable earthing all as specified and as directed by Engineer-in-Charge.(Note:-Earth wire/strip to be secured on bus bar insulators and insulators shall be fixed on pole not more than one meter apart with MS clamps made out of 25x4mm MS flat wth nuts, bolts and washers and GI wire/strip shall be fixed in such a way that wire/strip should not be touch on pole in any case)

Surface excavation in hard/dense soil n.exc 30cm deep and averaging 15cm deep and getting out

M&L cement concrete type D2,1:4:8(40mm graded aggregate)in foundations and mass concrete

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM :6

M&L Hardcore of gauge exc 63 mm but n exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L Machine pressed precast concrete interlocking pavour block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish colour shade as decided by Engr-in-Charge.

M&L sand cushioning bedding layer of 25 mm thick incl spreading levelling and ramming under floors including watering as required.

Providing cement concrete type C2,1:3:6(40mm graded aggregte)100 mm thick as in sub base all as specified and directed.

Rendering 10 mm thick in CM1:4 on fair faces of brick work or concrete finished even and fair all asm specified.

Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and directe.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and making good surface for laying of cable / GI Pipe complete all as specified and directed by Engr in charge.

(a) Soft /Loose Soil

(b) Hard /dense Soil

Returning filling in excavated soil in trenches, watering and well ramming in layers n exc 25 cm complete all as specified by Engr in charge

Removal of surplus excavated spoil to distance n exc 50 metre compelete all as specified and directed by Engr in charge

Supply and laying pipe galvanised medium class including fittings 20 mm dia laid in trench complete all as specified and directed.

Gun-metal, globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed complete all as specified and directed by Engr in charge

Cutting 25/32mm bore existing steel tubing for alternation or additions of new pipe connection of 20 mm bore with necessary Tee, bends etc complete all as specified and directed by Engr in charge.

Supply , laying, connecting and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured , electric power cables ( heavy duty) with stranded aluminium conductor 1100 volts grade in trenches/ passing through pipe/fixing on walls, floors etc incl using suitable clamp of cross sectional area 2 core 10 Sqmm Sqmm all as specified and directed.

Supply , laying of DWC Pipe of outer dia 50mm and inner dia 38 mm all as per specified and directed.

Earth wok in excavation in any kind of soil by mechanical means(hydraulic excavator)in foundation trenches or for drains n.exc 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottom ,lift upto 1.5m, including getting out the excavated soil and disposal of surplus soil as directed within a lead of 50m.

M&L for RCC drain pipes 150mm , class NP-2 laid in trenches and jointed complete with collar all as specified complete as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D-2 (40mm gde stone agg) as in foundation and mass filling and etc all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified as directed by the engr in charge.

Providing cement concrete, type B1,1:2:4 using 20 mm graded aggregate in forming drain in man holes all as directed by Engr- in -Charge.

M&L precast cement concrete type B-1, 1:2:4 mm graded aggregate in cover slabs for man holes , shelves and similar articles with plain faces set in CM 1:4 complete all as spd.

Returning , filling in, including spreading , levelling , watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete as specified and directed by Engr-in-Charge.

S&F PVC SWR bends 110mm dia any radius

S&F PVC SWR vent cowl 110mm dia

S&F PVC SWR pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls

Concrete bed to drain pipes of 150mm dia including forming cradles in cement concrete type D2,1:4:8 all as specified and directed.

Rendering 15 mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth without using any extra cement complete all as specified & directed.

S&F re inforced concrete bends for drain pipe 150mm dia

M&L plain cement concrete 1:2:4 type B-1, using 20mm graded stone aggregates, as in copings, kerbs and like including weathering, slightly rounded for chamfered angles and throating, including provn of form work if required as directed.

M&L TMT Bars 10mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified.Fe-410-W (GdeE-250)

Cutting in to existing manhole for connecting new drains 150 mm dia ,making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete 1:2:4,type B1 smooth finished and reforming benching as required.

S&F on site hume pipe septic tank for 10 users of size 600mm diax2500mm x55mm designed to carry sewage and sullage water all as directed by Engr-in-Charge.

M&L for soakage well of size 1.2m x 3m depth including excavation in any type of soil, PCC 1:3:6,type D2 in below foundation, walls of honeycombed masonry with top ring of M-25 Concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC Cover slab in M-25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats all as directed by Engr-in-Charge.

Earth work in excavation in al kind of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All as per item No 126 above but in ordinary rock

M&L Cement concrete in foundation filling and mass concrete, Type D2 1:4:8 (40mm grade aggregate)

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6

M&L Raised pointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto courses

M&L Providing precast cement concrete,1:3:6, type C1 using 20 mm graded aggregate set in CM 1:6 as in bond stones (for stone walling). etc. (of any section indicated), with plain fair faces, including chamfers, weathering, throating etc. and setting in mortar complete with joints to match. Note Qty of bond stones shall be deducted from Item No 4

M&L Providing, cement concrete type B1,1:2:4 using 20mm graded aggregate in coping and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Returning filling in including spreading ,levelling watering and well ramming in layers not exc 25cm in soft/loose soil

S& lay PVC (SWR) pipes 75 mm dia as in weep holes complete all as specified and directed

Hammer dressing with maximum depression from a straight edge held against the surface n.exc 40mm dressing on granite or trap stone

Sunrise Traders (BID ID -3406220)

Decent Decorators (BID ID -3406269)

M/S K.D.MATE (BID ID -3406723)

Mukund Engineers and Contractors (BID ID -3405292)

Horizon Construction (BID ID -3406541)

vishalconstruction (BID ID -3405728)

VP DEVELOPERS AND CONTRACTOR (BID ID -3406860)

BSK Construction (BID ID -3406320)