OUTSOURCING OF 11KV/0.433 KV MANNING SERVICES AND MAINTENANCE OF HT/LT EQUIPMENTS OTHER ELECTRICAL WORKS AT DRDO TOWNSHIP AND ADJOING AREA, KANCHANBAGH, HYDERABAD

Amount

Provision of services for attending electrical complaints lodged at MES Service Centre from users of DRDO complex,NAI and adjoining area under AGE E/M-I, GE(I) R&D Kanchanbagh by way of receiving the complaints from users and update the same as and when rectified and submitting completion report duly signed by the occupants including electrical repair work of any defective wiring in buildings, service connection cables, main switches, DB’s replacing fuses and switching on/off of street lights at DRDO complex, NAI (H) and adjoing area under AGE E/M-I,GE(I) R&D Kanchanbagh including checking repair and maintenance to LT/ HT over head lines, UG Cables, feeder pillar boxes, bus bars, GOD’s etc connected with external electric supply during the shift periods as mentioned below on all the days including Sundays and holidays complete all as directed by Engr-in-Charge for area as mentioned below :- (a) Attending all HT/LT installations as indicated above located at D type, E type and F type quarters area in DRDO township in all three shifts as follows: 1st shift from 0600h to 1400h-one Electrician(semi skilled)& one helper(unskilled). 2nd shift from1400h to 2200h-one Electrician (semi skilled)& one helper(unskilled). 3rd shift from 2200h to 0600h-one Electrician (semi skilled)& one helper(unskilled).

(b) Attending all HT/LT installations as indicated above located at A type, B type, C type quarters and any other MD ACCN area in DRDO township in three shifts as follows: 1st shift from 0600h to 1400h-one Electrician(semi skilled)& one helper (unskilled). 2nd shift from1400h to 2200h-one Electrician (semi skilled). 3rd shift from 2200h to 0600h-one Electrician (semi skilled). (c) Attending all HT/LT installations as indicated above located at common utility buildings and OTM Accn area in DRDO township in one shift from 0800Hrs to 1600Hrs - one Electrician (Semi skilled). NOTE : Contractor should depute sufficient extra workers(out of other shifts ) on emergency whenever the Break Down occurs i.e., 24/7 (Clearing the fall of trees, restoring/ restrining of OH lines insulator's / jumpers/ fuses etc.) and restore the Power Supply within one/two hours with out fail. Any delay in restorily power supply without proper reason shall liable for blacklisting of contractor, decision of accepting officer shall be final and binding. The rate quoted deemed to be included the same.

Note for manpower employed through contract : (i) In case of requirement, tradesmen provided for one area may be utilized in other areas at the discretion of the department without any extra cost to department as directed. (ii) Rate quoted shall be deemed to include for leave reserve/Off of the staff employed. (iii) The rate quoted shall be deemed to include the cost of uniform, Shoes, Helmet, Belt and insulation gloves for tradesmen employed.. (iv) The necessary Tools & Plants shall be provided by the contractor. (v) Minimum wages to the employees to be paid shall be as per minimum fair wages declared by Governement of India. (vi) Each employee should be facilitated with adhoc bonus privilage as applicable in accordance with Govt Of India and the same to be deemed to be incuded in the quoted rate.(vii) Documentry proof of individauals duly signed by contarctor/contractor's rep shall be forwaded. (viii) In case of absence of operator, double the rate quoted shall be recovered.

(ix) During operation of installations/equipments/tree trimming in respective electrical power lines/Electrical panels should be isolated properly, necessary safety measurments(like helmet,belt, insulation gloves etc..),necessary safety precautions / safety devices to be adopted and the quoted rate is deemed to be included for same & in case of any eventuality to tradesmen/Operators, the contractor is fully responsible. (x) The contractor will adhere to pay monthly payment cycle to the employees irrespective of RAR/Funds availability. (xi) Temporary laying of LTUG cable of any size and any length for restoration of supply during break down / other requirement shall be deemed to be included in the above quoted rate. (xii) Rate quoted shall be deemed to include for restoration of jumpers,HT fuses using existing resourses during short circuits due to wind/rain, to restore the supply for incoming and out going feeders. Note (i): supply only materials as required shall be measured and paid seperately under relevent items of this schedule. (ii) Rate quoted is deemed to include for taking down of supply only items refered at note No. (i) and fixing of the same.

S&F in repairs non metallic PVC conduit 20 mm dia exclusive of boxes tees, bends, elbows, reducers, tube ends and fixing accessories such as couplers, lock nuts, saddles pipe hooks etc complete all as directed.

Dismantling LT pole of any height by taking out from PCC foundation complete and shifting to other location as directed including fixing the pole in true vertical position including excavation and earth work, PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as base concrete and PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in both foundation and coping of poles all as specified in SSR Part I-2009 and applying two coats of aluminium paint to pole surface complete all as directed.

Cutting and trimming of tree branches of any girth and of any size, touching to overhead lines and clearing the distance of1.5 mtr length on both side of OH line with a span of 35 mtrs each, disposing the same and clearing the site complete all as directed.

M&L for point wiring for One light point controlled by one way switch 6 Amps complete with 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor 1100 V grade drawn through existing conduit on ceiling and terminated to sunken box suitable for fixing of switches, sockets etc including 1.5 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly and taking down old point wiring complete all as directed.

All as per Srl item no.06 here-in-before but for One ceiling fan point controlled by one fan regulator complete all as directed.

All as per Srl item No.06 here-in-before but for One bell point controlled by one bell push complete all as directed.

All as per Srl item No.06 here-in-before but for One 3 pin 5 Amps switch socket outlet point on independent board complete all as directed.

All as per Srl item No.06 here-in-before but for One 3 pin socket outlet 5 Amps on the same board with other switches complete all as directed.

M&L for point wiring complete with 2.5 Sqmm PVC insulated unsheathed single core multi standard copper conductor 1100 V grade drawn through and including suitable PVC conduit on wall/ ceiling and terminated in existing MS box 3 mm laminated hylum sheet top cover/modular type for fixing switches, sockets etc, including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly for power point three pin 15 Amps including taking down old point wiring complete all as directed. Make for item No.06 to 11:- KEI/ RPG/ INDOASIAN/ FINOLEX/ GLOSTER/ HAVELLS PVC Conduit: Sudhar/Diamond/Avon

Supply & fixing of DB SPN 8 way double door including taking down old existing unserviceable DB complete all as directed .

Supply & fixing of DB SPN 4 way double door including taking down old existing unserviceable DB complete all as directed.

S&F sheet metal enclosure DB TPN 4 way 3 phase 4 wire 200 Amps rated busbar capacity double door, vertical type including incoming G frame 3 pole MCCB 32 to 100A, 10 KA, 50 Hz breaking capacity including taking down old existing unserviceable enclosure complete all as directed. Make for item No.12 to 14: ABB/ SIEMENS/ LEGRAND/ L&T/C&S/ SCHEIDER/ HAVELLS

Supply & fixing of MCB single pole 5 Amps to 32 Amps including taking down old existing un serviceable MCB complete all as directed.

Supply & fixing of Isolator 2 pole 240 Volt 5 to 40 Amps including taking down old un serviceable isolators complete all as directed .

Supply & fixing of Isolator TP 40 Amps complete 415 V 50 Hz including taking down old un serviceable isolators complete all as directed.

Supply & fixing of Isolator 4 pole operating on 415V, AC supply of capacity 63 Amps including taking down old existing un serviceable isolators complete all as directed.

S & F MCCB of 3 Pole 125 Amps capacity 10 KA breaking capacity and 415 V complete incuding taking down old existing unserviceable MCCB complete all as directed.

S&F in repairs AC earth plug and socket with sheet metal enclosure with MCB SP 20A complete all as directed. Make for item Nos.15 to 20: ABB/ SIEMENS/ LEGRAND/ L&T/C&S/ SCHNEIDER / HAVELLS

S&F MCCB 250 Amps, 3 pole, 25 KA/35KA, 415 Volts, 50 HZ including necessary fixing arrangement for fixing of MCCB to the existing panel, connecting cable connections including taking down old unserviceble MCCB complete all as directed.

S&F MCCB 315 Amps, 3 pole, 35 /50KA, 415 Volts, 50 HZ including necessary fixing arrangement for fixing of MCCB to the existing panel, connecting cable connections including taking down old unserviceble MCCB complete all as directed.

S&F MCCB 400 Amps, 3 pole, 35/50KA, 415 volts, 50 HZ including necessary fixing arrangement for fixing of MCCB to the existing panel, connecting cable connections including taking down old unserviceble MCCB complete all as directed.

S&F MCCB 630 Amps, 50 KA, 3 pole, 415 volts, 50 HZ adjustable type including necessary fixing arrangement for fixing of MCCB to the existing panel connecting cable connections including taking down old unserviceble MCCB complete all as directed. Make for item Nos. 21 to 24 :- ABB/ SIEMENS/ LEGRAND / L&T / SCHNEIDER CONTROL & SWITCHGEARS/ HAVELLS Note:- The above items shall be executed immediately as and when required basis.

Supply only electronic ballast suitable for 1x36/40W FTL complete all as directed. Make: CG/BAJAJ/PHILIPS

Supply only Bell push flush type 5 Amps complete all as directed.

Supply only switch socket combination 5 pin 15 Amps multipurpose type complete all as directed.

Supply only switch piano one way 5 Amps 240 Volt complete all as directed.

Supply only lamp holder angle/ batten type complete all as directed.

Supply only ceiling rose two/three terminal surface backallite type complete all as directed. Make for item Nos.26 to 30: ANCHOR ROMA/ CRABTREE/ L&T/ INDO-ASIAN/ CONA/ HAVELLS/ POLYCAB/ SIEMENS/ GM MODULAR/ JAQUAR/ LEGRAND

M&L for sub main wiring complete with 2 runs of 4 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawn through existing conduit and continuity terminal ends including provision of 1 run of 4 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking connecting to earth dolly and taking down old unserviceable submain wiring complete all as directed. Note:- 3 runs of 4 Sqmm cable shall be measured as one unit length.

All as per srl item No. 31 here-in-before but 2 runs of 6 Sqmm cable and 01 run of 6 Sqmm cable for earth continuity conductor complete all as directed. Note:- 3 runs of 6 Sqmm cable shall be measured as one unit length.

Supply only twin core 4 Sqmm service wire 1100V grade heavy duty with PVC insulated aluminium stranded conductor served with inner sheatning of PVC tape and PVC sheathed complete all as directed.

Supply only twin core 6 Sqmm service wire 1100V grade heavy duty with PVC insulated aluminium stranded conductor served with inner sheatning of PVC tape and PVC sheathed complete all as directed .

Supply only twin core 10 Sqmm service wire 1100V grade heavy duty with PVC insulated aluminium stranded conductor served with inner sheatning of PVC tape and PVC sheathed complete all as directed. Make for item Nos.31 to 35: KEI/ RPG/ INDOASIAN/ FINOLEX/ GLOSTER/ HAVELLS

Supply only Prelaminated sheet top cover of size 75mm x 75mm and 3mm thick in half white or ivory colour for fixing or mounting switchs, sockets, fan regulator etc complete all as directed .

All as per srl item No.36 here-in-before but of size 175mm x 100mm

All as per srl item No.36 here-in-before but of size 250mm x 300 mm

S & F in repairs basic all purpose surface and wall mounted 4',18w LED batten with polycarbonate housing & integrated electronic driver along with necessary connections,copper cable complete all as directed. Make: Havells cat no. LHEXBQP7IN1W018 or techno commercially equivalent in CG/PHILIPS

S & F in repairs basic all purpose surface and wall mounted 2',9w LED batten with polycarbonate housing & integrated electronic driver along with necessary connections,copper cable complete all as directed. Make: Havells cat no. LHEXBQP5IN1W009 or techno commercially equivalent in CG/PHILIPS

Earthing with GI earth plate electrode 600x600x6 mm buried directly in ground vertically to a depth of not less than 2.25 mtrs below ground level with the top edge not less than 1.5 mtrs below ground level connected to GI earth strip of size 32X6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel and GI protection pipe, 40 mm dia light grade including necessary excavation & earth work, PCC 1:3:6 type C1 Chamber, RCC 1:2:4, type B1 as in cover 50 mm thick with 8mm dia TMT bars @100 mm c/c both ways, GI water pipe 20 mm dia, medium grade, funnel, wire mesh, salt, charcoal complete all as shown in electrical plate No. 3 of MES Sch `A' Part - I complete all as directed. NOTE: GI earth strip and GI pipe beyond 7.5m shall be measured and paid for seperately.

S&F GI earth strip of size 32 x 6mm as in earth continuity conductor or main earthing lead fixed to wall on batten or recess or buried in ground or fixed to poles or any other indicated situation, as required including taking down old unserviceable earth strip complete all as directed.

Supply & fixing Bipin holder suitable for FTL fitting 1x36/40W including removing old bipin holder complete all as directed.

Supply only Socket 6A-2/3 pin combined two module type complete all as directed.

Supply only Socket 6A/16A-2/3 pin combined two module type with five speed control complete all as directed.

Supply only 1 way 6Amp switch modular type 1module complete all as directed.

Supply only 1 way 16Amp switch modular type 1module complete all as directed.

Supply only piano switch 2 way complete all as directed. Make for srl item Nos.44 to 48 :- ANCHOR ROMA/ CRABTREE/ L&T/ INDO-ASIAN/ CONA/ HAVELLS/ POLYCAB/ SIEMENS/ GM MODULAR/ JAQUAR/ LEGRAND

Supply only FTL starter suitable for 20/40 W FTL fitting complete all as directed.

Supply only switch socket outlet 3 pin, 5 Amps, 2 in 1 operating on 230 V, 50 Hz complete all as directed.

Supply only bell ding dong, AC, 230V, single pole complete all as directed.

Supply only Buzzer, AC, 230V, single pole complete all as directed.

Supply only fan regulator 240 V AC electronic step type complete all as directed. Make for item Nos.49 to 53 :- ANCHOR ROMA/ CRABTREE/ L&T/ INDO-ASIAN/ CONA/ HAVELLS/ POLYCAB/ SIEMENS/ GM MODULAR/ JAQUAR/ LEGRAND

Taking down unservcieable Celing fan/ exhaust fan, dismanting, overhauling, and replace the unserviceable spares, rewinding the motor etc and re-assembling the fan after complete repairs refixing the same at same location complete all as directed by Engr-in-charge. Note :- (i) Spare parts shall be measured and paid separately. (ii) Rewinding Job shall be measured & paid separatelly.

M&L for rewinding of ceiling fan/ exhaust fan of any make of the following sweep including removal of existing burnt out winding carefully from the slots, cleaning the slots with cleaning agents, winding with super enameled copper wire of same gauge with insulation, varnishing complete all as directed

Ceiling fans of 1200/ 1400 Sweep.

Exhaust fan of 230/ 300 Sweep.

Supply only capacitor 2.5 mfd suitable for ceiling fan.

Supply only capacitor 3.5/ 4.0 mfd suitable for ceiling fan. .

Supply only ball bearings suitable for ceiling/ exhaust fans of any sweep/ make.

Supply & lay XLPE insulated , armoured heavy duty electric cable with aluminium conductor , 1100 volts grade of cross- sectional area 50 sq mm 3.5 core including taking down existing cable complete all as directed.

Supply & lay XLPE insulated , armoured heavy duty electric cable with aluminium conductor , 1100 volts grade of cross- sectional area 16 sq mm 4.0 core including taking down existing cable complete all as directed.

Supply & lay for XLPE insulated , armoured heavy duty electric cable with aluminium conductor 1100 volts grade of cross- sectional area 25 sq mm 3.5 core including taking down old unserviceable cable complete all as directed. Make for item Nos.59 to 61: HAVELL'S/ UNIVERSAL/ CCI/ GLOSTER/ KEI/ POLYCAB/ KEC INTERNATIONAL (RPG)

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick using soil complete all as directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed.

Supply and spreading of dry clean natural river sand in trenches/ transformer yard / two pole structure yard for cable protection complete all as directed. Note:- Punned thickness only shall be measured for payment purpose.

Supply & lay common burnt bricks, sub class 'B', of size 230 x 115 x 75mm in trenches for cable protection complete all as directed.

S&F Galvanised iron tubing 100 mm dia, light grade, laid at road crossing etc complete all as directed.

S&F Galvanised iron tubing 40 mm dia, light grade, laid at road crossing etc complete all as directed. Make for item Nos. 67 & 68: ZENITH/ TATA/ JINDAL/SWASTIC

BHAGYARAM ENTERPRISES

SUN LIGHT HOUSE

M/S PAVANI ENTERPRISES

Universal refrigeration and Engineering Company

Maruthi international

Shreshta Associates