CONSTRUCTION OF MODERN MGR WATCH TOWER AND ALLIED WORKS AT AF STATION BIHTA

Amount

SCHEDULE A PART I (BUILDING WORKS)

Lump sum price worked out by the contractor for Construction of Building and allied Works .as listed in Sch ‘A’ Part I.

Schedule A Part-II ( Internal Water Supply)

Lump sum price worked out by the contractor for Internal Water Supply as listed in Sch ‘A’ Part II .

Schedule A Part-III ( Internal Electrification)

Lump sum price worked out by the contractor for Internal Electrification as listed in Sch ‘A’ Part III .

Schedule A Part-IV ( External Water Supply )

Lump sum price worked out by the contractor for External Water Supply as listed in Sch ‘A’ Part IV.

Schedule A Part-V ( External Eletric Supply )

Lump sum price worked out by the contractor for External Electric supply as listed in Sch ‘A’ Part V

Schedule A Part-VI ( Road, Path & Culvert )

Lump sum price worked out by the contractor for Road path and Culvert as listed in Sch ‘A’ Part VI

Schedule A Part-VII ( Sewage Disposal)

Lump sum price worked out by the contractor for Sewage Disposal as listed in Sch ‘A’ Part VII

Schedule A Part-VIII ( Area Drainage)

Lump sum price worked out by the contractor for Area Drainage as listed in Sch ‘A’ Part VIII

Schedule A Part-IX ( Lighting Protection)

Lump sum price worked out by the contractor for Lighting Protection as listed in Sch ‘A’ Part IX

Schedule A Part-X ( Site Clearence , Excavation and Earth Work)

Lump sum price worked out by the contractor for Site Clearence , Excavation and Earth Work as listed in Sch ‘A’ Part X

Schedule A Part -XI(Misc item)

S & F CP urinal spraider of 15mm bore fancy types screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F for CP Jet spray with 1.00M long CP Flexible tube complete all as specified and directed

S & F 2 way CP angle cock of 15mm bore fancy types screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

M & L for lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings with LED lamp 5 watt , 230V complete all as specified and directed .

Supply and fixing ceiling fan with down rod, fan connector/fan hook, 1200mm sweep,BEE 5 star rated 240V AC with 3 fan blade and connecting up including provn of three core PVC insulated multi stranded flexible copper conductor cable of size 1.5 Sq.mm copper wire from connector to fan of length not less than 0.5 mtr complete all as specified & directed.

Supply and fixing ABS body Exhaust fan of 250 mm sweep , single phase 230 V AC , with louver shutters including mounting frame, nut, bolts, washers, fasteners etc and connecting exhaust fan to ceiling rose including provn of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection complete all as specified .

Supply and fixing metal body Exhaust fan of 300 mm sweep (heavy duty) , single phase 230 V AC , with louver shutters including mounting frame, nut, bolts, washers, fasteners etc and connecting exhaust fan to ceiling rose including provn of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection complete all as specified .

S & F MCCB 100 Amp, 16 KA, 4 pole 415 Volt adjustable type Ics+100 % as per IEC 60947-II complete all as specified and directed by Engineer-in-charge.

S & F MCB TP 40 Amp , 415 volt AC supply rupturing capacity not less than 10 KA 'C- curve "complete all as specified and directed by Engineer-in-charge.

S & F MCB SPN 32 Amp 240 Volt AC supply rupturing capacity not less than 10 KA 'B curve' complete all as specified and directed by Engineer-in-charge.

S & F MCB SP 6-32 Amp 240 Volt AC supply rupturing capacity not less than 10 KA 'B curve' complete all as specified and directed by Engineer-in-charge.

S & Fixing wall/surface mounted type LED light fitting complete with LED lamp of 1x20 watt, 5700K (4 ft) , polycarbonate housing & integrated electronic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable . Make :- Havells Cat No-LUMILINEBS20WLED865SPCWH/Phillips cat pt No:-BN021CLED20SPS NW GR/Bajaj cat no -BCLSB 20 WH

S & Fixing wall/surface mounted type LED light fitting for mirror light complete with LED lamp of 1x10 watt (2 ft) , extruded aluminium heat sink provided for efficient heat dissipation & integrated electrionic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable .Make:- Havells Cat No. ENDURALINEARNEOBS10WLED830SPCWH / Philips Cat Pt No. BN021LEd 105-6500 PSU GR 51 / Wipro Cat Pt No. LL20-111-XXXX-65 NEO 10W.

S&F ceiling mounted type LED light fitting suitable for 36 watt, 5700K, 230V,Size (2X2)feet, in powder coated white finish with integrated LED driver complete internally prewired and duly connection all as specified & directed. Make : bajaj Cat Pt No. BZRSWL36W GZ1 WH/ Wipro cat pt No. CRC010 R038 HP57GL1 / CG CAT NO LCTLRNE-36-FO-CDL.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized iron wire 4 mm as Earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe medium grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point of galvanized Iron/steel of size 75x75x 25mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified and directed. NOTE :- (i) The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 metre beyond the earth plates electrode and the earth resistance of the whole system shall be as near as possible to 0 but shall not in any case exceed one ohm. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed / permitted. (iii) The rates quoted shall also deemed to include earth work in hard/dense/soft soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtr.

S&F telephone socket one module with all fixing accessories complete all as specified & directed.

S&F modular type metal flush boxes 3 Module complete with modular plate & blanking plate for unused way etc for fixing of telephone socket .

S & F Modular PVC enclouser with plug and socket single pole and neutral with a two pin and earth plug and socket,240V , AC complete with one single pole MCB of capacity 25 Amp complete all as specified and directed by Engr-in-charge.

S & F factory made epoxy powder coated Distribution Board VTPN 4 ways 415 volt grade ( VTPN MCB DB ) with double door with acrylic top cover ( IP-43 protection ) CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with Knockouts complete all as specified and directed

M & L for street light brackets made out of 40mm bore light grade GI tubing not less than 1.20mtr and bent to required shape without welding for street light and fixed on pole with 02 Nos MS clamps of size 40X6mm including provision of nuts,bolts washer,cutting , welding , drilling holes etc two coats aluminium paint over one coat of red oxide primer on MS Work complete all as specified and directed by EIC.

Supply and fixing Electronic voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designated for input voltage variation between 170V to 250V and output stabilized voltage of 230 volt with accuracy of (+ -)2.5% and of capacity 1KVA complete all as specified and directed. Make- V-GUARD/Blue Bird/Venus .

Supply and fixing Electronic voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designated for input voltage variation between 170V to 250V and output stabilized voltage of 230 volt with accuracy of (+ -)2.5% and of capacity 4KVA complete all as specified and directed. Make- V-GUARD/Blue Bird/Venus .

Supply and installation,commissioning of water cooler fully stainless steel electric driven(single phase) having approximate storage capacity of 40 ltrs and nominal cooling capacity of 40 ltr per hour complete all as specified and directed by Engineer-in-Charge. Make ; Voltas , Blue Star

M & L Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.00mm thick buried directly in ground vertically in pit of depth not less than 2.25 mtr below normal ground level with top edge of the earth plate not less than 1.50 mtr below normal ground level connected to GI strip 32 X 6mm upto 7.5 Mtr long from earth point to test point by means of galvanized bolts, nuts, check nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to LT panel etc with & including adequate quantity of charcoal dust and common salt around earth plate , PCC 1:3:6 type C-1( using 20 mm graded crushed stone aggregate) for earth pit with 40 mm thick pre-cast cover reinforced cement concrete with 8 mm dia TMT bars@ 75 mm c/c both way with 12 mm dia round bar as handle,frame of angle iron 40x40x6mm, GI medium grade watering perforated at bottom pipe 20 mm dia with funnel and wire mesh, 40 mm dia GI light grade earth lead protection pipe including testing completed all specified and directed. NOTE :- (i) The rates quoted shall also deemed to include the cost of Earth test point and earth strip and protection pipe upto 7.5 metre beyond the earth plates electrode and the earth resistance of the whole system shall be as near as possible to 0 but shall not in any case exceed one ohm. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed / permitted. (iii) The rates quoted shall also deemed to include earth work in hard/dense/soft soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtr.

Supplying, installing, testing & commissioning out door type cubical panel board outer shell made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 foundation/footing 60 cm above and 45 cm below the ground level with 1 mtr plateform all around panel constructed with 1500mm thick 63mm (below ground level) broken brick coarse and PCC 1:3:6 type C2 using aggregate minimum 75mm thick above ground level , frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI for 35 MVA rupturing capacity at 415 Volts factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93 comprising of the following :-

Supplying, installing, testing & commissioning out door type cubical panel board outer shell made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 foundation/footing 60 cm above and 45 cm below the ground level with 1 mtr plateform all around panel constructed with 1500mm thick 63mm (below ground level) broken brick coarse and PCC 1:3:6 type C2 using aggregate minimum 75mm thick above ground level , all around panel constructed with 1500mm thick 63mm (below ground level) broken brick coarse and PCC 1:3:6 type C2 using aggregate minimum 75mm thick above ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI for 35 MVA rupturing capacity at 415 Volts factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93 comprising of the following :-

Supplying, installing, testing & commissioning out door type cubical panel board outer shell made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 foundation/footing 60 cm above and 45 cm below the ground level with 1 mtr plateform all around panel constructed with 1500mm thick 63mm (below ground level) broken brick coarse and PCC 1:3:6 type C2 using aggregate minimum 75mm thick above ground level , frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI for 35 MVA rupturing capacity at 415 Volts factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93 comprising of the following :-

S & F LED Decorative post top (MAPLE) for 360 degree indirect light with IP 65 protection. Cat Ref - LPTO-40-CDL/M Make : Crompton or equivalent in Havells and Bajaj.

S&F LED Light fitting complete 45 Watt With high power energy saving pressure die cast aluminium IP 66 roadway luminiarys heat resistant toughened glass with frame better optics for uniform distribution with high power LED as Ligh source complete all as specified and directed. Make - CG Cat Pat No LSTP-45-CDL or equivelent make and model of PHILIPS/HAVELLS

Supply, installation, testing and commissioning of factory made street light panel suitable for single phase and neutral consisting of 40 Amps MCB SPN -01 No, Contactor rating 32/SP-1 No, Astronimical timer-1 No operation on 220 Volt,50 Hz AC supply with max load 6 KW including mounting on wall/pole where directed and making necessary electrical connections with the existing cable by using new cable gland and suitable size of aluminium lugs, MS clamp complete all as pecified and as directed. Make - Havells Cat Part No IHXSS0106A or Equivalent make of Indo Asian, Schneider

Supply & fixing LED revolving search light , energy saving , long range , 230V , 300 W beam range 700 mtr with stand manually operated suitable for mounting of search light on for manual rotating of the light on the horizontally (360 degree ) and vertically ( more than 45 degree ) with provision of both locking arrangment at desired position , IP 66 dia cast LM6 body with air fins, powder coated body complete all as pecified and as directed.

S & F rectangular type LED Flood light 60 Watt (SECURE) with innovative thermal management having IP 65 protection Cat part No LSFO-200-CDL/60 Make : CG or equivalent in Havells/Bajaj

S & F LED bollard 10 Watt (SYRUS) having IP-65 protection Cat Ref : LBLSR-10-WW Make : Crompton or equivalent in Havells/Bajaj

S & F Integral LED aviation light luminiaries comprising of aluminium housing with polycorbonate enclosure including connecting with twin core twisted flexible copper conductor cable, complete all as specified and as directed Make - Bajaj, Cat Part No- 110731 and Luminaure type BGAV 302 LED or eqvlnt Note: Cutting,drilling,welding,GI nuts,bolts and washers as required for fitting of LED aviation light at the place of conventional aviation light shall be included in quoted rate.

NOTE 1: The installation shall include mounting/fitting indoor units at respective location. Laying refrigerant piping of upto 6 Mtr length and connecting both the units after drilling bores in the wall as required. The thickness of copper tubing shall not be less than 0.70 mm. Suction pipe shall be insulated with expanded polythene foam not less than 5 mm thick. Laying 15 mm drain pipe to drain out the condensate water being formed in the condensing unit. Leak testing of the entire system. Charging refrigerant gas in the unit and suitable electric wiring between indoor and outdoor unit upto 6 Mtr length and upto switch within 3 Mtr of location of indoor unit. Make:Carrier/DAIKIN/Hitachi/LG

M&L Septic tank on site ( Conventional Brick masonary septic tank designed) to carry sewage and sludge water, excavation in any type of soil, PCC below foundation, Baffle Walls , Roof Slab, ventshaft,manhole opening with cover, connection etc complete all as specified, shown on drawing and as directed for 25 users complete.

M&L Septic tank on site ( Conventional Brick masonary septic tank designed) to carry sewage and sludge water, excavation in any type of soil, PCC below foundation, Baffle Walls , Roof Slab , ventshaft, manhole opening with cover, connection etc complete all as specified, shown on drawing and as directed for 10 users .

M&L Septic tank on site ( Conventional Brick masonary septic tank designed) to carry sewage and sludge water, excavation in any type of soil, PCC below foundation, Baffle Walls , Roof Slab , ventshaft, manhole opening with cover, connection etc complete all as specified shown on drawing and as directed for 05 users .

M&L for Soakage well , foundation in PCC 1:3:6, wall of solid and honey combed with top ring of M25 concrete incl intersepting chamber,RCC cover slab M25/ SFRC,filled with brick bats of size 1.2 mtr dia x 3.0 mtr effective depth including excavation,removal,returning filling in any type of soil complete all as specified, shown on drawing and as directed.

M & L PCC block 1:2:4 type B1 (20mm graded stone aggregate) of size 150 X 150 X 150 mm for air insertion of air termination rod including form work complete all as specified & directed by Engr-in-Charge.

M& L PVC /China clay wall grip suitable for fixing of vertical conductor including steel screw 3" complete all as specified & directed by Engr-in-Charge.

Supplying, laying, jointing and testing cable jointing kit for 1100 V (Earthed) grade cable for End termination cold shrink joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 185 to 300 Sqmm, indoor/outdoor type complete all as specified and directed

Supplying, laying, jointing and testing cable jointing kit for 1100 V (Earthed) grade cable for End termination cold shrink joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 70 to 150 Sqmm, indoor/outdoor type complete all as specified and directed

Supplying, laying, jointing and testing cable jointing kit for 1100 V (Earthed) grade cable for End termination cold shrink joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 25 to 50 Sqmm , indoor/outdoor type complete all as specified and directed

Supplying, laying, jointing and testing cable jointing kit for 1100 V (Earthed) grade cable for End termination cold shrink joint complete with jointing material and accessories suitable for 4 core XLPE armoured aluminium conductor cable of size 4 to 16 Sqmm ,indoor/outdoor type complete all as specified and directed

M & L for construction of brick masonary valve pit chamber of size 900x900x900mm depth (internal dimensions) with sub class B bricks built in CM 1:6, MS cover 3.00mm thick fixed on angle iron frame of size 40x40x6mm thick with hinges and proper locking arrangements including necessary excavation and earthwork in any type of soil, PCC 1:4:8 type D-2 as in foundation and PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including 10mm thick internal/ external plastering in CM 1:4 and painting the steel surface with two coat of bituminous black paint over a coat of red oxide primer complete all as specified and as directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine for of GI Pipe 80mm dia complete all as specified & directed by Engineer-in-Charge. Note: pipe should be measured and paid seperately.

SANYOG CONSTRUCTION PRIVATE LIMITED