Internal Electrification work of IInd and IIIrd Floor DSIIDC BCD Building, Connaught Place New Delhi

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC/MS conduit, with modular switch, modular plate, suitable GI box and earthingthe point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable etc. as required.

Group C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75 mmX75 mm)

3 Module (100 mmX75 mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

3 Module

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

125 A, 16 kA,TPMCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way, Double door

16 way, Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator inthe existing MCB DB complete with connections, testing and commissioning etc. as required.

S/I/T/C of Modular A.C. type Box complete with 16 Amp. Socket outlet, 32 Amp. Rating, 240/415 V, 10 kA "C" Curve MCB, G.I. Box, Cover plate, etc. complete as required

S/I/T/C of Modular type UPS Box complete with 5 Amp. Socket outlet (03 Nos.), 5 Amp Switch (1 No.), and 1 no. indicator complete for 8 Module GI box (Size:-8"X3") with cover plate fixing, connection etc.. complete as required

Supply of 1200mm sweep AC electric ceiliing fan, capacitor type double ball bearing complete with 300 mm down rod suitable for operation on 230/240Volts, 50 Hz, Single phase, AC supply at site.(Make:-Havells)

Supply of Heavy duty exhaust fan 1400 RPM, 300mm, 230 Volt,50 Hz complete accessories in all respect. (Make:-Havells)

Supply of A.C. wall fan of 400mm sweep complete with motor, blades fan and cover as complete accessories in all respect.

Supply of 1x20 watt LED tube light Indoor Decorative LED extruded Aluminium batten in aluminium, Anosised finish with Opal diffuser IP-20 tube light as complete accessories in all respect.(Make:-Helonix)

Supply of recess mounting 36 Watt LED flat panel of size 2 x 2 made of CRCA sheet steel duly powder coated with high efficient LED's & glare free full opal diffuser 36 Watt complete as required at site.(Make:-Helonix)

Supply of Surface-mounting back-lit LED 1'X4', 36 Watt, tile in CRCA housing with full opal diffuser suitable for Armstrong/Grid ceilings with revolutionary Flicker controlled technology to reduce harmful invisible flicker present in LED lighting sources complete in all respect.(Make:-Helonix)

Supply of MOD round recess mounting LED slim round down lighter with high efficient LED's & glare free full opal diffuser 15 Watt complete as required at site.(Make:-Helonix)

Supply Of 70 Watt LED Waterproof Flood Light ,Cool White ,Aluminium Flood Light etc. with all accessories at site.(Make:-Helonix)

Supply of 4 way Extension Board with 4 Socket and 4 Mtr. wire complete in all respect. (Make:-Havells)

Supply & Fixing of Fire Extinguisher of different sizes Complete with all accessories as per manufactures specifications (Make:-Eco)

Capacity 5.0 Kg ( ABC TYPE)

Capacity 4.5 Kg (Co2 TYPE)

Supply & Fixing of crylic/Aluminium/metal/SS with LED Backlit Glow Sign Board with respective DSIIDC name address DSIIDC Logo etc, to be printed /engraved as per direction of Engineer-in-charge etc. with all accessories at site.

Arora Engineers & Contractors (BID ID -1555865)

ROYAL ELECTRICAL CO. (BID ID -1555623)

R.K. Jain and Sons Hospitality Services Pvt. Ltd. (BID ID -1555954)