Motor Rewinding and motor purchase for sc/st colonies in 4 villages of Gundenahalli GP

Sinking bore well of 165mm dia clear using super fast rig in all strata including over burden upto 20M fixing of casing pipes, collars and cap with necessary cutting and threading & welding including transportation of rig and supporting vehicles crew charges and cost of consumables etc. complete including yield testing at the final depth with a minimum working of compressor for one hour FOR PIPED WATER SUPPLY SCHEMES, MWS SCHEMES AND FOR HAND PUMP BOREWELLS. (PRE DWD. circle SR 2012-13 page No 57, Item No 9.1)

0 mtr up to 50 mtr

50 mtr up to 100 mtr

100 mtr up to 150 mtr

150 mtr up to 200 mtr

200 mtr up to 250 mtr

150 mtr up to 200 mtr

Cost of materials (PREC-GLB SR-2012-13, P.No- 80, I.No 6,7,8)

ISI Mark Medium-B Class ERWMS CASING Pipes

MS Casing Coller

MS Casing Cap

Grand Total =

Section Officer

RDW & SD Sub Division

Byadagi

ESTIMATE

Sud- Sinking & Borewell (Near Kere)

Sinking bore well of 165mm dia clear using super fast rig in all strata including over burden upto 20M fixing of casing pipes, collars and cap with necessary cutting and threading & welding including transportation of rig and supporting vehicles crew charges and cost of consumables etc. complete including yield testing at the final depth with a minimum working of compressor for one hour FOR PIPED WATER SUPPLY SCHEMES, MWS SCHEMES AND FOR HAND PUMP BOREWELLS. (PRE DWD. circle SR 2012-13 page No 57, Item No 9.1)

0 mtr up to 50 mtr

50 mtr up to 100 mtr

100 mtr up to 150 mtr

150 mtr up to 200 mtr

200 mtr up to 250 mtr

150 mtr up to 200 mtr

Cost of materials (PREC-GLB SR-2012-13, P.No- 80, I.No 6,7,8)

ISI Mark Medium-B Class ERWMS CASING Pipes

MS Casing Coller

MS Casing Cap

Grand Total =

Section Officer

RDW & SD Sub Division

Byadagi

Sud-Estimate of Pumping Machinery

150mm dia sub mersible Pumpset :-

Providing,supplying to work site,fixing of Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work.7.50 HP - 155 LPM @ 112 m = 8 STG Outlet Dia - 2.00"(RWS SR 19-20, Chapter No.12 Item No. 12.02.5(d)

Including Area Waitage 8% (38958*8/100=3116.64+38958=42074.64)

Supply, installing,testing and commissioning COMMON control panel consisting of the following Phase Indication Lamp-3 Nos,Fault Indication Lamp-1 No, Digital VAF meter -1 No ,On/Off illuminated push button-2 Nos including protection for a)over voltage, b)under voltage,c)voltage unbalance,d)over current,e)Dry run,f)Provision to connect float switch, Indoor type. (RWS SR 19-20, Chapter No.12 Item No. 12.07(b)

Including Area Waitage 8% (13288*8/100=1063.04+13288=14351.04)

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 Sqm (RWS SR 19-20, Chapter No.12 Item No. 12.03.c

Including Area Waitage 8% (108*8/100=8.64+108=116.64)

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 50 mm (RWS SR 19-20, Chapter No.12 Item No. 12.06 (a)

Including Area Waitage 8% (1175*8/100=94+1175=1269)

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. (RWS SR 19-20, Chapter No.12 Item No. 12.09)

Including Area Waitage 8% (450*8/100=36+450=486.00)

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. (RWS SR 19-20, Chapter No.12 Item No. 12.10)

Including Area Waitage 8% (1025*8/100=82+1025=1107)

Supply and delivery of galvanized mild steel tubes heavy class (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) (RWS SR 19-20, Chapter No.12 Item No. 12.11(a)

Including Area Waitage 8% (624*8/100=49.92+624=673.92)

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work.(RWS SR 19-20, Chapter No.12 Item No. 12.16

Including Area Waitage 8% (5650*8/100=452+5650=6102)

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work.(RWS SR 19-20, Chapter No.12 Item No. 12.17)

Including Area Waitage 8% (1127*8/100=90.16+1127=1217.16)

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit,with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. 3½ x 10 sqmm (RWS SR 19-20, Chapter No.12 Item No. 12.19 (b)

Including Area Waitage 8% (180*8/100=14.4+180=194.40)

Grand Total =

Mislaneuose =

Section Officer

R.D.W & S.Sub Division Byadgi

Pump Moter Repair

Pipe line

Other mislaneuose

Total Rs.

Section Officer

R.D.W & S.Sub Division Byadgi

PÁªÀÄUÁjAiÀÄ ºÉ¸ÀgÀÄ : UÀÄAqÉãÀºÀ½î UÁæªÀÄ ¥ÀAZÁAiÀÄvÀ ªÁå¦ÛAiÀÄ £Á®ÆÌ UÁæªÀÄUÀ¼À°è ¥Àj²µÀÖ eÁw ªÀÄvÀÄÛ ¥Àj²µÀÖ ¥ÀAUÀqÀzÀ PÁ¯ÉÆäAiÀÄ ªÉÆÃmÁgÀ ¸ÉÃjzÀAvÉ ªÉÆÃmÁgÀ Rj¢ jªÉÊArUï ªÀÄvÀÄÛ PÀÄrAiÀÄĪÀ ¤Ãj£À ¤ªÀðºÀuÉ

Sub Estimate: Pump Moter Repair

Rewinding of submergible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and testing. for all types of submergible pumpsets etc.(with guarantee period not less than 6 months) for (RWS SR 23-24, V 5 Item No.13.1.7)

For all types of submersible pumpsets above 7.0 HP and upto 7.5H.P.

Replace the components of submergible pump sets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and testing etc.(with gurantee of period not less than 1 year) for:(RWS SR 23-24, V5 Item No.13.2.1)

The bowls of same type and make

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. (RWS SR 23-24,V5 Item No. 13.32)

Total amount

Section Officer

RDW & SD Sub Division

Byadagi

Sud-Estimate of Pumping Machinery

150mm dia sub mersible Pumpset :-

150mm dia sub mersible Pumpset :Supply & delivery at site submercible pumpsets suitable for Borewell of 150 mm Dia having the declared duty conditions as detailed below and satisying performance charaterstics for pump & Motor as declared to the Burea of Indian standerds on Tunkey basis. The pumpsets should bear ISI Certification. Mark IS : 8034/1989 With all latest amendments as provided in 7.50 HP 54 mtr head 210LPM Dishcharge etc., (Gul SR, Page No. 55)

Supply of meter and panel board unit comprising of all the items specified with Brand new best make push button operated CDCI/Star Delia starter with protective devices confarming to IS Standared as, provided in Indoor/ Outdoor Type 6.00 H.P to 10.00 H.P. etc., (Gul SR, Page No. 56)

SUBMERSIBLE CABLE : Supply & delivery of Brand new best make P.V.C. insulated cable of flat 3 core (sheathed) of nominal cross area 1.5:2.5 & 4mm. 4 kg confirming to IS: 1994-1997 with alatest amendments with ISI mark, as provided in b) 1x3x4 Sqm. etc., (Gul SR, Page No. 56)

NON RETURN VALVE : Supply & delivery of Brand new best indegeneous make Non -return valve confirming to IS: 773 - 84 with alatest amendments with ISI mark, as provided in 50 mm dia etc., (Gul SR, Page No. 56)

POWER CAPACITOR : Supply & delivery of Brand new best indegeneous power capacitor as per IS : 293 with alatest amendments with ISI mark of required capacity tested and approved by one KEB. Authorities and erection. Slectrification on & commissioning of the same at the location of the respective pumpsets as provided in etc., (Gul SR, Page No. 56)

Supply & delivery of Brand new best indegeneous brand new MCB(mainutare sercuit breaks) of required capacity as per IS : 8828/78 & sits latest amendments with ISI marks of 6/10/16/20/ 25/40 amps with suitable box as provided in etc., (Gul SR, Page No. 56)

Supply & delivery of G.I. pipes of heavy duty 'C' class confirming to IS :1239/Par - I/1979 with latest amendments with ISI mark (One end fitted with heavy duty coller and other and fitted with protective cover) as per provided in 50mm etc., (Gul SR, Page No. 56)

Errection, electrification and commissing work of submersible pumset including aligning and balancing with all necessary erection materials and labour including supply & erection of two pair of supporting clamps. One B.W. Cap, cable,. Procters, bolts and nuts valve and guges etc. involved in job as provided in etc., (Gul SR, Page No. 57)

Errection, of the penel board and meter board units with all necessary materials and labour including cement concrete foundation bed etc. complete. Indoor type etc., (Gul SR, Page No. 57)

MAIN CONECTION : Supply Brand new P.V.C. insulted sheated steel/wire/steel tape. around U.G. cable with P.V.C. Outer sheathing 1 K.V Confirming to ISL: 2554/1964 with ISI mark from KEB pole to meter board unit of following as providing in 3.1/2X10 Sqm etc., (Gul SR, Page No. 57)

EARTHING Supplying and fixing and wiring earth electrodes for grounding circuits.I.C. cutouts and other equipments on the meter board in pit. The pit should be filled in with equal proportion of salt and charcoal 150 mm alround the pipe to complete depth. The conection from the pipe to the conduit etc. is to be established through G.I. Wire of size as nuts. washers. and check nuts etc. The pipe shall have 16 through holes of 12 mm dia as providing in etc., (Gul SR, Page No. 57)

Grand Total =

Section Officer

R.D.W & S.Sub Division Byadgi

Sud-Estimate of Pumping Machinery

150mm dia sub mersible Pumpset :-

150mm dia sub mersible Pumpset :Supply & delivery at site submercible pumpsets suitable for Borewell of 150 mm Dia having the declared duty conditions as detailed below and satisying performance charaterstics for pump & Motor as declared to the Burea of Indian standerds on Tunkey basis. The pumpsets should bear ISI Certification. Mark IS : 8034/1989 With all latest amendments as provided in 7.50 HP 54 mtr head 210LPM Dishcharge etc., (Gul SR, Page No. 55)

Supply of meter and panel board unit comprising of all the items specified with Brand new best make push button operated CDCI/Star Delia starter with protective devices confarming to IS Standared as, provided in Indoor/ Outdoor Type 6.00 H.P to 10.00 H.P. etc., (Gul SR, Page No. 56)

SUBMERSIBLE CABLE : Supply & delivery of Brand new best make P.V.C. insulated cable of flat 3 core (sheathed) of nominal cross area 1.5:2.5 & 4mm. 4 kg confirming to IS: 1994-1997 with alatest amendments with ISI mark, as provided in b) 1x3x4 Sqm. etc., (Gul SR, Page No. 56)

NON RETURN VALVE : Supply & delivery of Brand new best indegeneous make Non -return valve confirming to IS: 773 - 84 with alatest amendments with ISI mark, as provided in 50 mm dia etc., (Gul SR, Page No. 56)

POWER CAPACITOR : Supply & delivery of Brand new best indegeneous power capacitor as per IS : 293 with alatest amendments with ISI mark of required capacity tested and approved by one KEB. Authorities and erection. Slectrification on & commissioning of the same at the location of the respective pumpsets as provided in etc., (Gul SR, Page No. 56)

Supply & delivery of Brand new best indegeneous brand new MCB(mainutare sercuit breaks) of required capacity as per IS : 8828/78 & sits latest amendments with ISI marks of 6/10/16/20/ 25/40 amps with suitable box as provided in etc., (Gul SR, Page No. 56)

Supply & delivery of G.I. pipes of heavy duty 'C' class confirming to IS :1239/Par - I/1979 with latest amendments with ISI mark (One end fitted with heavy duty coller and other and fitted with protective cover) as per provided in 50mm etc., (Gul SR, Page No. 56)

Errection, electrification and commissing work of submersible pumset including aligning and balancing with all necessary erection materials and labour including supply & erection of two pair of supporting clamps. One B.W. Cap, cable,. Procters, bolts and nuts valve and guges etc. involved in job as provided in etc., (Gul SR, Page No. 57)

Errection, of the penel board and meter board units with all necessary materials and labour including cement concrete foundation bed etc. complete. Indoor type etc., (Gul SR, Page No. 57)

MAIN CONECTION : Supply Brand new P.V.C. insulted sheated steel/wire/steel tape. around U.G. cable with P.V.C. Outer sheathing 1 K.V Confirming to ISL: 2554/1964 with ISI mark from KEB pole to meter board unit of following as providing in 3.1/2X10 Sqm etc., (Gul SR, Page No. 57)

EARTHING Supplying and fixing and wiring earth electrodes for grounding circuits.I.C. cutouts and other equipments on the meter board in pit. The pit should be filled in with equal proportion of salt and charcoal 150 mm alround the pipe to complete depth. The conection from the pipe to the conduit etc. is to be established through G.I. Wire of size as nuts. washers. and check nuts etc. The pipe shall have 16 through holes of 12 mm dia as providing in etc., (Gul SR, Page No. 57)

TOTAL

Section Officer

R.D.W & S.Sub Division Byadgi

Sub Estimation For Rising Main

Earth work excavated for Pipe line trenches including depositing of bank upto a lead of 50 Mtrs. Including Shoring and strutting, danger lighting and using sight rails and boning rods at every 100mtrs. Where necessary as directed in the strata. earth to a distance not exceeding 50M and with a lift upto 1.50 M. By Manual Means (i) In Ordinery soil

(RWS SR 12-13, Page No. 15 Item No.1.8(ii)

Total

b) 75mm dia PVC Pipes of 6Kg/Sqcm

As per Qty Above Item No.1

TOTAL

Section Officer

R.D.W & S.Sub Division Byadgi

Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means) (RWS SR 19-20, Chapter No.2 Item No.2.22.1(ii)

Including Area Waitage 8%( 262*8/100=20.96+262=282.96)

Total

Including Area Waitage 8%( 207*8/100=16.56+207=223.56)

b) 75mm dia PVC Pipes of 6Kg/Sqcm

Giving hydraulic test for C.I. / R.C.C. / P.V.C. / H.D.P.E/ D.I /A.C. pipelines to the pressure equal to two times the working pressure including cost of supply of water. (RWS SR 19-20, Chapter No.10 Item No.10.07(a))

Including Area Waitage 8%( 4.6*8/100=0.368+4.6=4.968)

As per Qty Above Item No.2

Including Area Waitage 8%( 103*8/100=8.24+103=111.24)

As per Qty Above Item No.1

Grand Total =

Section Officer

R.D.W & S.Sub Division Byadgi

Sub Estimation For Distribution

Earth work excavated for Pipe line trenches including depositing of bank upto a lead of 50 Mtrs. Including Shoring and strutting, danger lighting and using sight rails and boning rods at every 100mtrs. Where necessary as directed in the strata. earth to a distance not exceeding 50M and with a lift upto 1.50 M. (RWS SR 12-13, Page No.14 . Item No.1.2) 1.2.ii In Hard soil

janata plat

ST colony

SC colony

Main road

Total

Cutting of road surface for pipeline trenches and disposing of the excavated stuff as dirrected including,barricading, danger lighting etc. In the following classifications. (RWS SR- 2012-13 Item No.1.7 Page No.16)1.7 iii Cutting Cement concrete road Surface

ST colony

SC colony

Total

3.4.1(i) 63mm 4Kg /sqcm

3.4.1(ii) 75mm 4Kg /sqcm

Supplying valves of Board approved make conforming to relevant ISS with latest amendments as detailed below of following diameters and types and conveying to work site, loading, unloading, stacking etc.,complete with all lead and lift and fixing CI valves. The rate is inclusive of cost of Bolts and Nuts. (KUWS&DB SR -2013-14, P-14, Item No-9.1)

80mm Dai CI valve

Supplying and fixing of CI valve box confirming to relevant ISS (Minimum weight 40 kgs) and 15 cms, size Road box including CI barrel pipe and fixing with earth work in all soils etc, comlete, road box to be fixed in CC 1:3:6 and plasterd all over with CM 1:3, 20 mm thick with all lead and lift curing for 10 days.KUWS&DB SR 2013-14, I.No. 16, Page No. 17)

Total

Section Officer

R.D.W & S.Sub Division Byadgi

Sub Estimate: Pipe line

SR Rate

Total

SR Rate

Total

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications (P.No.7 I.No.1.10 VOL-1, Common SR 2023-24)

SR Rate

Total

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments) 63 mm dia PVC Elbows (P.No. 117, I.No.10.9, 5 VOL-I, RDWS&S SR V-5 SR 2023-24)

SR Rate

Total

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments) 75 mm dia PVC Elbows (P.No. 117, I.No.10.9, 6 VOL-I, RDWS&S SR V-5 SR 2023-24)

SR Rate

Total

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments) 90 mm dia PVC Elbows (P.No. 117, I.No.10.9, 7 RDWS&S SR V-5 SR 2023-24)

SR Rate

Total

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 63 mm dia PVC BEND ( RWS V 5 SR 23-24, Item No. 10.11.5 P No 118 )

SR Rate

Total

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC BEND ( RWS V 5 SR 23-24, Item No. 10.11.6 P No 118 )

SR Rate

Total

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 90 mm dia PVC BEND ( RWS V 5 SR 23-24, Item No. 10.11.7 P No 118 )

SR Rate

Total

Sub Total

Section Officer

RDW & SD Sub Division

Byadagi