Civil work in connection with installation and commissioning of lifts (13 Pax) for F.O.B. at Tilda and Belha.

II, Vol-I & II.

Item- 01 Execution of all works connected with above work covered under CPWD-DSR-2021 Ver-II, Vol-I & II.

RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

S No. Item Description of Item Unit Qty Rate Amount

1.0 CARRIAGE OF MATERIALS

By Manual Labour including loading, unloading

and stacking for lead less than 0.50 KM

1.2.1 Lime, moorum, building rubbish

1.2.1.1 Cost of carriage including loading, unloading & cum 480 187.24 89875.2

stacking for first 50 metres

1.2.1.2 Every additional lead of 50m or part thereof cum- 2800 40.77 114156

beyond1st 50 m upto 9 such additional lead lead

1.2.2.1 Cost of carriage including loading, unloading & cum 280 234.05 65534

stacking for first 50 metres

1.2.2.2 Every additional lead of 50m or part thereof cum- 2000 50.96 101920

beyond1st 50 m upto 9 such additional lead lead

2.0 EARTH WORK

Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5

m in width or 10 sqm on plan), including dressing

of sides and ramming of bottoms, lift upto 1.5 m,

including getting out the excavated soil and

disposal of surplus excavated soil as directed,

within a lead of 50 m.

2.25 Filling available excavated earth (excluding rock) cum 240 253.95 60948

in trenches, plinth, sides of foundations etc. in

6 layers not exceeding 20cm in depth,

consolidating each deposited layer by ramming

and watering, lead up to 50 m and lift upto 1.5 m.

2.27 Supplying and filling in plinth with sand under cum 40 2161.2 86448

7 floors, including watering, ramming, consolidating

and dressing complete.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement concrete

4.1 of specified grade excluding the cost of centering

and shuttering - All work up to plinth level :

4.1.6 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived cum 40 6670.25 266810

from natural sources: 6 graded stone aggregate

40 mm nominal size derived from natural

Providing and laying cement concrete in retaining

walls, return walls, walls (any thickness) including

attached pilasters, columns, piers, abutments,

pillars, posts, struts, buttresses, string or lacing

courses, parapets, coping, bed blocks, anchor

blocks, plain window sills, fillets, sunken floor etc.,

up to floor five level, excluding the cost of

centering, shuttering and finishing:

derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from

natural sources).

5.0 REINFORCED CEMENT CONCRETE

5.1S CAST IN SITU

Providing and laying in position specified grade of

reinforced cement concrete, excluding the cost of

centering, shuttering, finishing and reinforcement

- All work up to plinth level :

derived from natural sources: 3 graded stone

aggregate 20 mm nominal size derived from

natural sources)

RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Reinforced cement concrete work in walls (any

thickness), including attached pilasters,

buttresses, plinth and string courses, fillets,

5.2 columns, pillars, piers, abutments, posts and

struts etc. above plinth level up to floor five level,

excluding cost of centering, shuttering, finishing

and reinforcement :

derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from

natural sources)

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. for Sqm 80 307.95 24636

5.9.2 Walls (any thickness) including attached pilasters, Sqm 1920 669.55 1285536

butteresses, plinth and string courses etc.

5.9.3 Suspended floors, roofs, landings, balconies and Sqm 200 766.55 153310

access platform

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete upto plinth

5.22.6 Thermo-Mechanically Treated bars of grade Fe- Kg 19200 89.65 1721280

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete above plinth

5.22A.6 Thermo-Mechanically Treated bars of grade Fe- Kg 27200 89.65 2438480

8.0 CLADDING WORK

Providing and fixing 18 mm thick gang saw cut,

mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations

of required size, approved shade, colour and

8.2 texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints

treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing,

curing, moulding and polishing of edges to give

high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby

8.20S STONE WORK DRY CLADDING

RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

8.32 Designing, fabricating, testing, installing and Sqm 80 4474.2 357936

fixing in position Curtain Wall with Aluminium

Composite Panel Cladding, with open grooves for

linear as well as curvilinear portions of the

building , for all heights and all levels etc.

including: (a) Structural analysis & design and

preparation of shop drawings for pressure

equalisation or rain screen principle as required,

proper drainage of water to make it watertight

including checking of all the structural and

functional design. (b) Providing, fabricating and

supplying and fixing panels of aluminium

composite panel cladding in pan shape in metalic

colour of approved shades made out of 4mm

thick aluminium composite panel material

consisting of 3mm thick FR grade mineral core

sandwiched between two Aluminium sheets (each

0.5mm thick). The aluminium composite panel

cladding sheet shall be coil coated, with Kynar

500 based PVDF / Lumiflon based fluoropolymer

resin coating of approved colour and shade on

face # 1 and polymer (Service) coating on face #

2 as specified using stainless steel screws, nuts,

bolts, washers, cleats, weather silicone sealant,

backer rods etc. (c) The fastening brackets of

Aluminium alloy 6005 T5 / MS with Hot Dip

19 Galvanised with serrations and serrated washers

to arrest the wind load movement, fasteners, SS

316 Pins and anchor bolts of approved make in

SS 316, Nylon separators to prevent bi-metallic

contacts all complete required to perform as per

specification and drawing The item includes cost

of all material & labour component, the cost of all

mock ups at site, cost of all samples of the

individual components for testing in an approved

laboratory, field tests on the assembled working

curtain wall with aluminium composite panel

cladding, cleaning and protection of the curtain

wall with aluminium composite panel cladding till

the handing over of the building for occupation.

Base frame work for ACP cladding is payable

under the relevant aluminium item.s The

Contractor shall provide curtain wall with

aluminium composite panel cladding, having all

the performance characteristics all complete , as

per the Architectural drawings, as per item

description, as specified, as per the approved

shop drawings and as directed by the Engineer-

in-Charge. However, for the purpose of payment,

only the actual area on the external face of the

curtain wall with Aluminum Composite Panel

Cladding (including width of groove) shall be

measured in sqm. up to two decimal places.

10.0 STEEL WORK

10.2 Structural steel work riveted, bolted or welded in Kg 20000 111.95 2239000

built up sections, trusses and framed work,

20 including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer

10.19 Providing and fixing mild steel round holding Kg 240 88.5 21240

down bolts with nuts and washer plates complete.

10.20 Providing and fixing bolts including nuts and Kg 320 140.15 44848

washers complete.

11.0 FLOORING

11.16S TILE FLOORING

RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY

Chequered terrazo tiles 22 mm thick with graded

marble chips of size up to 6 mm in floors, jointed

with neat cement slurry mixed with pigment to

match the shade of the tiles, including rubbing

and polishing complete, on 20 mm thick bed of

cement mortar 1:4 (1 cement :4 coarse sand) :

23 11.19.3 Dark shade pigment using ordinary cement Sqm 80 1240.75 99260

11.26S KOTA STONE FLOORING

Kota stone slab flooring over 20 mm (average)

thick base laid over and jointed with grey cement

slurry mixed with pigment to match the shade of

the slab, including rubbing and polishing

complete with base of cement mortar 1 : 4 (1

cement : 4 coarse sand) :

13.0 FINISHING

13.25 Extra for plastering:

13.26 Providing and applying plaster of paris putty of 2 Sqm 1200 214.3 257160

25 mm thickness over plastered surface to prepare

the surface even and smooth complete.

13.44S EXTERIOR FINISHING

Finishing walls with Premium Acrylic Smooth

13.47 exterior paint with Silicone additives of required

26 ltr/10 sqm over and including priming coat of

exterior primer applied @ 2.20 kg/10 sqm)

Painting with aluminium paint of approved brand

and manufacture to give an even shade .

15.0 DISMANTLING AND DEMOLISHING

Demolishing cement concrete manually/ by

mechanical means including disposal of material

within 50 metres lead as per direction of Engineer

equivalent design mix)

15.25 Dismantling stone slab flooring laid in cement Sqm 400 219.75 87900

mortar including stacking of serviceable material

and disposal of unserviceable material within 50