GE/ALP(8330B) KOLKATA OF 24-25

Amount

Demolition of cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.

Dismantiling of floor hearth or wall tiling incl cement mortar (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed.

Dismantling wrought iron or mild steel works of any description not otherwise provided for

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm and not exc 4 Sqm each and removing from site complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete upto four storiey bldg all as specified and as directed.

Taking down of steel window with guard bar complete all as specified and directed.

M&L Cement concret(1:4:8) Type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete

Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan or to any radius in half brick work built in CM (1:4) complete all as specified and as directed.

Material & labour for rendering 15mm thick in CM (1:4) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth complete upto four storie bldgall as specified and as directed.

Material & labour for 15 mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces upto four storey high bldg complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distember over a coat of primer as specified and directed.

Preparation of new surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.

Material & labour for preparation of old decorated surfaces of wall and applying one coat of oil bound distemper upto four storey bldg complete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces and applying multi colour texture with plastic paint to match existing design and pattern as approved by GE upto 12 storied of bldg complete all as specified and directed.

M&L for one coat of plastic paint over old texture sruface to match existing design and pattern as approved by GE upto 12 storied of bldg complete all as specified and directed.

Supply and fixing powder coated aluminium sliding windows/ Ventilator sliding on 3 track frame of section 92mmX30mm X1.55mm and shutters of section 20mm X40mm X1.55mm fixed with 5mm thick coloured sheet glass/wiremesh with rubber gasket , handel lock, 'U' channel with including with all fittings etc and etc all as specified and directed.

Material and labour for Glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed.

Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15 bore of pipes in mm all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20 bore of pipes in mm all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 25 bore of pipes in mm all as specified and directed.

Supply and fixing in repairs Unplasticised PVC pipe of pressure rating 6 kgf/cm2 with all fittings fixed complete to wall and ceiling or laid in floors bore in 15 mm in short length complete all as specified and directed.

All as per item No 24 here-in-before but bore in 20 mm

All as per item No 24 here-in-before but bore in 25 mm

M&L for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar (1:3) to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces complete all as spfd and directed.

Supply and fixing in repair 15mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed.

S&F in repair 15mm bore Brass CP angular stop cock concealed type with crutch or butterfly handle complete all as specified and as directed .

Supply and fixing in repair for 15mm bore stop valve, concealed type brass chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends fixed to GI pipe complete all as specified and as directed.

M&L 25mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in bedding of tiles/kota complete all as directed at site.

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10mm thick in CM (1:4) complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick, laid over cement screed over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm thick screed bed in CM (1:6) complete all as specified and directed.

Material & labour for framed work for such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-16.

Material & labour preparation of new steel and iron surfaces of any description area exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide and zinc chrome primer, complete all as specified and as directed.

S&F 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified.

S&F for Gun- metal, globe or gate valves 20 mm dia of pipe with iron wheel head,screwd both ends for iron pipe and fixed complete all as directed at site.

M & L for 75 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement laid in panels complete all as specified.

M & L for Cement concrete Type C1 (1:3:6) (20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings/hold fast, kneelers, apex stones, bed plates, kerbs water troughs and the like including or chamfered angles and throating, complete all as specified and directed

S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed.

S&F 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed.

S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed.

S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed.

M&L for Granite slab 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, walls, window- cills, cooking platforms over screed bed/plaster 15 mm thick in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.(upto 10 storey High of building)

Supply & fix 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamferred put together with Glue, pinned at joints complete all as specified and directed.

Supply & fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for preparation of new or previous untreated wood and wood based surfaces of any description over 10 cm girth or width not otherwise described and applying two coats of Synthetic enamal paint over a coat of pink primer.

S&F Solid PVC Moulded Door Frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and as directed.(upto 04 storey of building)

S/F Factory made solid panel PVC Moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face supply and fixing in frame

Supply & fix 75 mm long butt hinges medium weight, cold rolled mild steel complete all as specified and as directed.

Supply & fix 100mm long butt hinges medium weight, cold rolled mild steel complete all as specified and as directed.

Supply & fix 150 mm long aluminium anodised , barrel tower bolts of extruded section complete all as specified and directed.

Supply & fix 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolts and hasp and staple (Bolt type) and fixing clips of sheets cast or extruded sections and fixing bolts and sliding bolts or extruded section ot cast alum alloy and fixed length of bolt 300mm

M&L for providing factory made 75 mm thick precast RCC cover slab of 3 MT load bearing capacity confirming to IS : 12592 (Grade M-30) complete all as specified and directed.

M&L precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in cover slab, shelves, and similar work set in CM (1:4).complete all as specified and directed.

M&L for mild steel TMT bars 8 to 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Excavating in post holes (or similar holes) each n exc 0.50cu.m gettingout returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in hard dense soil complete all as specified.

Dismantiling of Asbestos cement/FR Sheet ( Corrugated,semicorrugated, etc ) sheet in roof coverings and rubbish off the premises (out of MOD land), complete all as specified and as directed.

M & L for PCC (1:3:6) Type C2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC ( 1:4:8 ) Type D -2 using 40 mm graded stone aggregate as in foundation, sub-base to floor etc complete all as specified.

Material and Labour for laying silver sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and Labour for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and pigment complete all as specified and as directed.

All as per item No 64 here in before but except tiles complete all as specified and directed.

M&L for coloured Rubber polished chequered tiles with grey cement and no pigment 30cm x 30 cm x 25mm thick , over 15mm thick screed bed in CM (1:6), set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Material and Labour for only refixing 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L for Rendering 15mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick, set in cement mortatr (1:4), as on brick/concrete surface etc finish even and smooth without using extra cement complete all as directed.

M&L for preparation on new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer upto four storey high bldg complete all as specified and directed.

M&L for Providing cement concrete type B-1,(1:2:4) (using 20 mm graded stone aggregate) as in benching concrete,coping ,hold fast etc complete all as specified and directed.

S&F for Steel work in MS tubes (round/square) including special shaped washer, necessary FI angle iron if required to complete the works as in truss, purlins, rafter, stanchions etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 graded St-240 complete all as specified and directed.

S & F 11-15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and as directed.

S&F MS Plates (plaines or chequered) square cut or notched (forming holes with riveted,bolted attechment) (300x300x8) at bottom & (200x200x8) at top GDE Fe 410-S

Supply & Fixing for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, fixed with self tapping screws as specified.

Supply & Fixing for Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, ficed with self tapping screws as specified as in ridges.

M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed.

S&F 3mm thick wall care putty on wall/ceilling complete all as specified and as directed.

M&L for suspended false ceilling (Decorative Type) system using chicogo metalic (E grid) exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick HPSC ( High pressure steam cured) pre- primed, self embossed textured designer board, water resistant termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid system duly suspended with 6 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (Wt- 0.007 Kg/clip) hold down clips (Wt - 0.0035 Kg/clip) with Provn of light fixture complete all as directed.

S&F powder coated aluminium Partition wall of frame size 80mm x 38mm x 2.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed.

M&L 9 mm thick prelaminated particle boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partions , fixed in repair complete al as specified.

S & F 5.5 mm sheet glass,ordinary quality and glazing with oil putty in square exc 0.50 Sq.m in each etc complete all as specified.

S&F in repairs power coated aluminium door shutter including door frame fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete incl aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80 mm x 38mm x 3.00 mm taking down old door with necessary all fittingand all necessary fittinngs complete all as specified and as directed.

S & F for Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc, complete all as spcified and directed.

S&F Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including aluminum chequered grill with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed.

S&F 4.8 mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane.

M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles exceeding 0.42 sqm but not exc 1.00 Sqm (1200mmX600mm) as in floor, Screed bed or bedding layer 15 mm thick in cement mortar (1:6) etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over complete all as specified and directed .

M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles exceeding 0.42 sqm but not exc 1.00 Sqm (1200mmX600mm) as in skirting etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over Screed bed or bedding layer of mortar 10 mm thick in cement mortar (1:4) as in dado/skirting complete all as specified and directed .

Complete removal of existing treatment of walls, ceiling and applying two coats of distemper oil emulsion over 3mm thick JK wall care putty (two coats) including necessary chalk whiting and priming coats complete all as specified directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out soft/loose Soil

M&L for PCC (1:3:6) Type C-2 using 20mm graded stone aggregate as in lintels upto 1.5m clear span,cills,steps,railing upto 60 cm in height,coping,including weathering,slightly rounded or chamfered angles and throating all as specified and directed.

M & L for rendering 10 mm thick plaster in CM (1:4) on fair faces of concrete surfaces as on ceiling finished even and smooth without using extra cement complete all as specified.

Preparation of new surface of wall and applying two coats of OBD over a coat of wall care putty complete all as specified.

Preparation of new surface of ceiling and applying three coats of white wash complete all as specified.

M&L for broken stone boulders Hard core, broken to gauge n exc 63 mm,deposited,spread and levelled in layered n.exc. 15cm thick, watered and rammed to a true surfaces complete.

M&L for 75 mm thick PCC (1:4:8) Type D-2 using 40mm graded stone aggregate as in sub base all as specified and directed.

S&F MS rolled section as in roof purlins, rafters and truss etc of MS pipe fixed with iron cleats along with nuts & bolts of required size or section or welded conforming to Fe-290 Gde E-165.

M&L for 40mm thick PCC Cement concrete type B-1,(1:2:4) (20mm graded stone aggregate), as flooring etc complete all as specified and directed.

Preparation of new surface steel of any description. Not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in cover slab, shelves, and similar work set in CM (1:4).complete all as specified and directed.

Chipping of unsound/weak concrete materials from slabs , lintel,chajja, fin, facia etc. by any means as directed by engr-in-charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etc and disposal of all debris out of MOD land upto four storey bldg and complete all as specified and as directed for 25mm average thickness.

Deduct/add for every less/extra 5mm thick.

M&L Removing of concrete all around reinforcement including from behind the reinforcing bars to give an avrage 25 mm (but not less than 15 mm clear air gap) by manual methods (using wire brushing, chiselling etc) and applying alkaline rust removing chemical followed by removing rust by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surface upto four storey bldg complete all as specified and directed upto 12 mm dia bar.

All as per Item No 103 here in before but for above 12mm dia barscomplete all as specified and as directed

Supply and application of coat of Epoxy Zinc rich primer on the prepared steel surface excluding behind the bar by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 upto four storie bldgcomplete all as specified and directed.

M&L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed upto four storey bldg.

M&L for introducing new reinforcement bars for structural connections in RCC Bram, Lintels, Columns and slabs uncluding power drilling holes of appropriate diameter in reinforced of plain cement concrete to a minimum depth of 150 mm and upto 200 mm including power drilling , fixed the reinforcement in position using epoxy of loose dust by blowing air, sealing with epoxy cartridges etc upto four storey bldg all as specified and directed.

M&L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-50 to the effected beam, etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as specified and directed ( Make: SIKA/FOSROC/ELANTAS BECK/KUNAL CONCHEM) 50 mm average thickness of Beam, upto four storey High.

Supply, mixing and application two component structural grade polymer modified reinstatement morter, where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as spd and directed upto 25 mm average thickness and upto four storey High. Make :- Sika/Fosroc NOTE:- Cement and sand morter in proportion of 1:2 graded coarse sand with polymer admixed in proportions approved

M&L for applying curring compound or equivalent, complete all as specified and directed. Over concrete surface as curing compound as per manufactures instructions, upto ten storey building complete all as specified and directed.

Supply and fixing of new TMT bars upto 12 mm dia of approved brand of requiste diameter by electro welding of length 2.5 to 5 d on both the side with the existing bar to require size and shape at the portion where the existing reinforcement has lost helf of its sectional area following by a coat of epoxy zinc primer sa per the descripetion mentioned , upto four storey building complete all as specified and directed.

M & L for coloured Non Skid ceramic tiles 7 to 8 mm thick, (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including Screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM (1:6) complete all as specified.

All as per item No 112 here in before but over 10 mm thick plater in CM (1:6) complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material in exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified.

Dismantling Stone slabs and tiles of any description or thickness in floors, apronsm paved laid dry or laid dry and pointed etc complete all as specified and directed.

Material & labour for preparation on new plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a coat of primer upto 12 storey bldg complete all as specified and directed.

M&L for 10mm thick plastering in ceiling surfaces in CM (1:3) surface finished even and smooth without using extra cement complete all as specified and directed.

S&F powder coated aluminium Partition wall of frame size 63.50mm x 38mm x 1.50 mm with standard beads/glazing clips, locking arrangement including fixing of 4.80mm thick sheet glass etc with necessary all fittings/fixtures etc complete all as per manufacturer's instructions and all as specified and as directed.

S&F for Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 92.00mmX29.50mmX1.50mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed.

M&L for preparing surfaces new decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying two coat of acrylic distemper with wall care putty complete all as specified and as directed.

Material and labour for Preparation of old plastered surfaces and applying one coat of acrylic washable distemper on walls complete all as specified and as directed.

Material and labour for preparation of old treated surfaces of wall by brooming down or steel wire brushing and applying one coat of white washing on wall surface etc complete all as specified and directed.

M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including 15 mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to watch with shade of granite including dismantling complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 15 mm thick (1:6) CM screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for treating the surface of old/ new Kota stone with beeswax polish complete all as specified and as directed.

Materials and labour for vitrified Ceramic tiles light shed 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM (1:6) for laying of floor finish complete all as specified and as directed.

S & F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS:1161-1979 grade ST-240

Dismantling fiber glass reinforced translucent corrugated sheet of any guage, thickness complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, Pulp, insulation etc.) any thickness, including cover fillets.

M & L for 10 mm thick gypsum borad, false ceiling jointless work including application of putty over gypsum board to achieve smooth and jointless ceiling surface and applying two coats of oil bound distemper in ceiling surfaces including framed work for consisting of 60 mm wide GI steel 'C' section of as in main of 0.71 mm thick and 60 mm GI channel section as in cross member of 0.63 mm thick and GI steel angle section as in suspenders of size (25 x 20 x 0.63) mm and wire cloth of 0.71 mm dia of wire and (100 x 50) mm aperature size including cutting, riveting, steel fastner, drilling holes in RCC roof and securing with screws etc. complete all as specified and as directed.

M & L POP Cornice with n. exc. 200 mm wide in ceiling edge of any design and shape complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. all complete as specified and directed.

M&L for point wiring for one light/ bell/ fan controlled by one number one way switch for light/fan complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of modular type galvanized MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixing screws, for fixing of modular type switches / socke t/ Fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

All as per item No. 134 here in before but for 5 Amps Socket on same board complete all as specified and directed.

All as per item No. 134 here in before but for 5 A socket point on independent board complete all as specified and directed.

All as per item No. 134 here in before but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

S & F Ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V.

S & F Modular type switch, one way 6 Amps , 1 module complete Make:-Legrand/Anchor(Roma)/Crabtree

S & F modular type socket 5 pin, 6 Amps 2 module complete . Make:-Legrand/Anchor(Roma)/Crabtree

S & F Modular type socket 5 pin, 16 Amps 2 module complete Make:-Legrand/Anchor(Roma)/Crabtree

S & F Modular type switch, one way 16 Amps, 1 module complete Make:-Legrand/Anchor(Roma)/Crabtree

S & F stainless steel Heavy duty turbo ventilator roof mounted of size 540 mm by cutting existing sheets of roof in suitable size complete all as directed.

S&F LED tube light fitting 4 ft 20 watt, 230 volt energy efficient comprises of extruded Aluminium housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.all as specified and directed. Make: Bajaj(Cat No-BSLSB20WWH)/Crompton(Cat No-CCS-103-20-65-SL-DP-NWH)/ Havells(Cat No-LUMILINEBS20WLED830SPCWH)

Material and labour in for replacement of three phase sub-main wiring with Four (R,Y,B, N) run of PVC insulated & unsheathed 10.0 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 10.0 Sqmm PVC insulated & unsheathed single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade for earth continuity conductor connected to common earth dolly, drawn through concelaed PVC conduit complete all as specified and as directed. Note :Five runs of 10.0 Sqmm cable shall be measured as one length.

Material and labour in for replacement of three phase sub-main wiring with Four (R,Y,B, N) run of 1100 V grade PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 6.0 Sqmm 1100 V grade PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through PVC concealed conduit complete all as specified and as directed Note : Five runs of 6.0 Sqmm cable shall be measured as one length.

Supply and fix TPN MCB DB 6 way with 200 Amps rated bus bar, neutral link, dinrail suitable for mounting MCB's 240 volts double door type as in repair of Busbar for distribution of power and light circuit including taking down old bus bar box and making good the disturbed surface complete all as specified and as directed. Make : ABB /Legrand/ Havells/L&T/C&S

Supply and fixing MCB TPN 63 AMP 415 Volt "C" series, breaking capacity 10 KA as incomer complete all as specified and as directed. Make : ABB /Legrand/ Havells/L&T/C&S

Supply and fixing MCB TPN 40 AMP 415 Volt "C" series, breaking capacity 10 KA as incomer complete all as specified and as directed. Make : ABB /Legrand/ Havells/L&T/C&S

Supply and MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed. Make : C&S /Legrand/ Havells/L&T.

Supply and fix SPN MCB DB 4 way with 200 Amps rated bus bar, neutral link, dinrail suitable for mounting MCB's 240 volts double door type as in repair of Busbar for distribution of power and light circuit including taking down old bus bar box and making good the disturbed surface complete all as specified and as directed. Make : Legrand/ Havells/L&T/C&S.

Supply and fixing Isolator TPN 40 AMP 415 Volt complete all as specified and as directed. Make : Legrand/ Havells/L&T/C&S.

P N GUPTA AND SONS (BID ID -3105977)

NESAIL CORPORATION (BID ID -3105023)

GAYATRI ENTERPRISE (BID ID -3106691)

RADHA ENTERPRISE (BID ID -3105344)

M/S AVIJEET INTERNATIONAL (BID ID -3107667)

DIPAK ENTERPRISE (BID ID -3107154)

NUPUR CONSTRUCTION (BID ID -3107744)