Repair work of Erach bridge on Betwa river at Km 29 and 30 of Daboh Poonch Gursarai Tikamgarh road in Jhansi district

Replacement of Expansion joint complete as per drawing Replacement of existing damged expansion joint by providing and laying of strip seal expansion joint System,Providing cleaning of gap, dismantling of deck slab portion expansionjoint, wearing coat etc. and back filling of the dresess uo to final finish level with concrete of grade M-35 complete as per approved drawing(s) MORT&H technical section 2607-1424

Drainage Spouts complete as per drawing and Technical specification(As per MORT&H, SI-15.17)

Construction of embankment with approved material obtained from local pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.(As per MORTH-3.17)

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications.(As per MORTH-15.4)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (As per MORT&H) SI-9.01-B-(i)

Sand Filling in foundation trenches as per drawing and technical specification (As per MORT&H) SI-15.03

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.(As per MORT&H) SI-9.03

Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and Technical Specifications(As per MORT&H, SI-15.10A)

First class brick work in 1:3 cement and fine sand of 1.25 FM. mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.RCC Grade M25 using batching plant transit mixer & manual placing

12 mm Cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80 mm. In girth and finished even and smooth. No extra for mixing any additive.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810(As per Lucknow SOR CH-26-SI-27

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

Providing and applying two coats of ready mix paint of approved brand of steel surface after through cleaning of surface to give an (as per MORT&H-8.09)

Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 5mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Supply and fixing of every dennision/3M brand RPM series 290 (CAT EYE) (RED/YELLOW COLOUR) made of polycarbonate with electronic welded prismatic retro reflective lens on both side for maximum retro reflection in wet and dry condition with bitumen adhesive BT 69.(as per lucknow SOR)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (As per Lucknow SOR)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (As per Lucknow SOR)

Please Enable Macros to View BoQ information