REPAIR /MAINTENANCE OF ROLLING SHUTTERS AND CERTAIN B/R WORKS IN DOMESTIC AREA AT AF STATION GWALIOR

Amount

Repair / maintenance of existing manually operated rolling shutters of any size / description by repairing the small parts of rolling shutters such as hood covers, guide channels, lock plate, riveting, bolting etc including greasing the rolling shutters and making it functional to the entire satisfaction of Engineer -In-Charge.

All as per item No 1.00 here-in-before but gear operated type including repair of gear box and gear box pipe.

Taking down rolling shutters of any description and any size for replacement of the unserviceable parts and refixing the same in the same opening after replacing the damaged parts and greasing the shutters complete all as specified and directed. Note: (i) The rate includes all small necessary repair works such as welding/ bolting/ riveting / punching/ sealing and like (ii) Fixing charges of new items under supply only under items i.e. 3.01 to 3.06 here-in-after shall be deemed to included in quoted rate.

(a) Supply only mild steel S.W.G spring for rolling shutters of weight not less than 2.50 Kg each

(b) Supply only mild steel S.W.G spring for rolling shutters of weight not less than 5.50 Kg each.

(c) Supply only 40mm dia mild steel medium weight pipe as in anchorage rods in single lengths.

(d) Supply only 1.00 mm thick MS plain black sheet as in hood over and bent to required shape.

(e) Supply only complete gear box with mild steel pipe of dia not less than 25mm

(f) Supply only 50mm dia mild steel medium weight pipe as in anchorage rods in single length.

S&F in repairs 1.25mm thick steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, push pull or manual type complete all as specified and as directed

S&F in repairs 1.25mm thick Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete, gear operated type with bevel gear box and crank handle complete all as specified and as directed

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F Ball bearing for rolling shutters complete all as specified and directed.

M &L for preparing of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified as directed

Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed.

Taking down shutters of any description area exc 1 Sqm and n.exc 2Sqm each complete all as specified and all as directed.

Refixing of shutters including taking down of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s) after resecuring or easing & adjusting, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm PVC sheet with wood grains printed on if reinforced with MS square tube incl 75mm long MS screws for fixing to walls all as per specified in SSR. complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing complete all as specified and directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing.

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates, hinges,hold fast etc. complete size /profile of frame as per IS including filling cement concrete type B-1 (1:2:4) filling and compaction in frame complete all as specified and directed.

S&F Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. incl filling cement concrete type B-1 (1:2:4) filling and compaction in frame complete all as specified and directed.

M&L 35mm thick factory made shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 35mm thick factory made second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) complete all as specified and directed.

S & F 35 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S & F100mm M.S butt hinges with MS frame work by spot welding incl necessary arrangement and handling of welding machine upto third floor of Bldg complete all as directed and specified by Engineer- in-charge.

S&F Butt hinges, medium weight Stainless steel 100 mm size complete all as specified and as directed

S&F 150mm long extruded anodise aluminium alloy handles fabricated type complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed 150mm long complete all as specified and directed.

Supply and fix foot operated door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring and cover plate overall length 150 mm complete all as specified and directed.

Supply and fix mild steel 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as spcified and directed.

M&L for preparation of surfaces on new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of surfaces on new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window and Steel door / window completed all as specified and directed.

M&L for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane in Steel frame complete all as directed by Engineer-in-Charge

S & F in repair 18mm thick UPVC board of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawer including demolition of existing board any type or specification complete all as specified and directed.

All as per ser Item No 33.00 here-in-befre but one side prelaminated type

S & F continuous (Piono) hinges ,stainless steel bright finished or electrogalvanised, width of flap 30 mm (when open) complete all as specified and directed.

S&F 125 mm size stainless steel, Hasp and staple, safety type, steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F stainless steel handles of 100 mm size for Cup board complete all as specified and directed.

S&F stainless steel magnet catchers for the cupboards/cabinate (including necessary fixing arrangement) complete all as specified and directed.

S&F in repairs foot operated door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring and cover plate overall length 150 mm all as specified and as directed.

S&F in repairs Aluminium anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and as directed.

S&F in repairs extruded aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and as directed.

S&F in repairs 300 mm long Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

Hacking out old broken glass panes 3 mm thick from steel frame including putty/ metal beadings and supply and fix 3mm thick sheet glass ordinary type, in squares n.exc. 0.50 Sqm in each pane including necessary arrangement new oil putty or with existing metal beadings complete all as specified and as directed

Hacking out old broken glass panes 3 mm thick from wooden framed shutters including putty/wooden beadings and supply and fix sheet glass ordinary quality, 3 mm thick, in square n.exc. 0.5 Sqm in each pane including necessary arrangement oil putty/wooden beads complete all as specified and as directed.

M&L for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quantity or description) from wooden frame/Steel frame complete all as directed by Engineer-in-Charge

S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window and Steel door / window, completed all as specified and directed.

Supply and fix in repairs Stainless steel 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S & F in repair 100mm M.S butt hinges with MS frame work by spot welding including necessary arrangement and handling of welding machine upto third floor of Bldg complete all as directed and specified by Engineer- in-charge.

Taking down cement plaster on brick walls / ceiling incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed..

M&L for 15mm thick rendering in cement mortar (1:4) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering on fair faces of brick work or concrete surfaces on ceiling with CM 1:4 etc finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over a coat of primer complete all as specicified.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for PCC type B1 1:2:4 (using 20mm graded stone aggregate) as in apex stone and similar items complete all as specified and directed

M&L for angle such as hold fast and similar items etc complete all as specified and as directed

M&L for removing/cutting trees, vegetation, digging out roots from concrete or brick wall filling holes on building (block of 8/16 qtrs) wall/roof/chajja/water tank staging area etc and making good with CM 1:4 complete all as specified & directed.

Sunil Traders (BID ID -3087173)

J.N.R. Engineers and Builders (BID ID -3076918)