PROVN OF COVERED DRAINAGE FOR BLDG NO T-23A, REPLACEMENT OF BROKEN FLOORING OF BLDG NO T-33 AND SPL REPAIR/REPLACEMENT OF ELECTRIC WIRING OF BLDG NO P-12 AND CONVENTIONAL LIGHTS TO LED FIXTURES INCLUDING CERTAIN REVENUE/MINOR WORKS AT DINJAN MIL STN

Amount

Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc. and getting out in Soft/ loose soil complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in any type of soil complete all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above starting point in soils complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in hard/ dense soil complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and as directed.

Refixing CGI sheet obtained from item No. 8 complete all as specified and as directed

Dismantling stractural steel work including doors, gate but excluding frame truss etc complete all as specified and as directed.

M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in foundatin filling and mass concrete complete all as specified and as directed.

M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) in foundatin filling and mass concrete complete all as specified and as directed.

M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in surface channels and drain complete all as specified and as directed.

Extra for forming fair finished to concrete surface of drain 30cm inner girth in cement including forms, mould, mitred/stopped etc complete all as specified and as directed.

M&L for cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in coping complete all as specified and as directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radious in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.

M&L for firebrick work in lining to the fire places, etc, set, jointed and pointed in fireclay complete all as specified and as directed.

M&L for cement concrete 1:2:4, type B-0 (using 12.5mm graded aggregate) in drain kerbs mud stops, rounded or chamferred on edges complete all as specified and as directed.

S&F for TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and as directed.

S&F for TMT bars 5mm dia and over upto and including 10mm dia in strirrups, spacers and binders spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed.

M&L for reinforced cement concrete, type B-1, 1:2:4 (using 20mm graded stone aggregate) in lintels over 1.5m clear span complete all as specified and as directed.

M&L for reinforcement cement concrete, type B-1 1:2:4 (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams, bases for columns etc complete all as specified and as directed.

M&L for reinforced cement concrete, type B-1, 1:2:4 (using 20mm graded stone aggregate) in columns, piller, piers, posts and struts etc complete all as specified and as directed.

M&L for form work to sides and soffits of floor or floor beams, lintels cantilever, shelves including supports, over hangs etc also splays between floor and beams etc in rough finished surfaces of concrete in flat complete all as specified and as directed.

M&L for form work to sides of pillars, posts, struts, piers, columns, and stanchoins complete all as specified and as directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, side and sofits of beams; and similar work to batter complete all as specified and as directed.

M&L for precast reinforced concrete, type B-1, 1:2:4 (using 20mm graded stone aggregate) as in cover slab or of manholes and position and set in cement mortat (1:4) complete all as specified and as directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M&L for coloured non skid ceramic tile 7 to 8 mm thick (suare/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for vetrified ceramic tiles in light shed 10mm thick (Square/rectangular) polished, area of each tile exceeding 0.36Sqm but not exceeding 0.42 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm screed bed or bedding in cement mortar (1:6) complete all as specified and as directred.

M&L for vitrified ceramic tiles in light shed 10mm thick (square/rectangular) polished area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick backing coat in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for chequered cement concrete tiles of size 20cmx20cmx25mm thick as in floors etc, including 15 mm thick screed bed or bedding in cement mortar (1:6) and set and jointed in neat cement slurry and pointed in grey cement and pigments to match with shade of tiles complete all as specified and as directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid dry and bedded in sand complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:6) with neeru finish complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick masonry or concrete surfaces and finishing surfaces even and fair without using extra cement complete all as specified and as directed.

M&L for 15mm thick in two layer (10 mm+5 mm thick) rendering on fair faces of brick work or concrete surface in cement mortar (1:4) finished even and smooth with out using extra cement admixed with water proofing compound as per manufacturer instruction complete all as specified and as directed. Note : WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for prepration of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for prepration of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L two coat of weather coat painting over a coat of primer as in wall, border of facia, chhajja, etc. including preparation of plastered surfaces complete all as specified and directed

M&L for preparation of surfaces of wall by 3mm thick wall care putty and applying two coat oil bond distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of surfaces of ceiling by 3mm thick wall care putty and applying two coat oil bond distemper over alkali resistant primer complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and refixing in same opening complete all as specified and as directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each (without taking off shutters from frames) complete all as specified and as directed.

M/L for 100 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for 100mm thick cement concrete type C-2, 1:3:6, (using 40mm graded stone aggregate) as in sub base/floor/footpath complete all as specified and as directed.

M&L for 150 mm thick cement concrete type B-2, 1:2:4 (using 40 mm graded granite stone aggregate) as in sub base complete all as specified and as directed.

M&L for granular sub base of grading III as per IRC 15:2011, 100mm thickness and rolled and consolidated to gradient and camber required with hand roller complete all as specified and as directed.

S&F for roof plates with sleeve pieces riveted or welded thereto, and similar roof and ceiling connections complete all as specified and as directed.

S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F for rolled mild steel work in roof trusses (framed), trussed, purlins crane gantries, rafts and fastening and heavy brackets framming (beams tee,angle channel and or flat sections) including distance pieces, cleat nut bolts etc quality confirming to Fe-290 (Gde E-165) complete all as specified and as directed.

S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for broken stone or boulders as hardcore of guage not exceeding. 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

S&F for roof trusses (framed), trussed, purlins, crane, gantries, rails and fastenings and heavy bracket, framing, (beam, tee, angle, channel or flat sections, including distance pieces, cleats etc Fe- 290 (Gde E-165) complete all as specified and as directed.

S&F for 0.63 mm thick mild steel, plain, galvanised iron sheet in hearths; chullah hoods, etc cut to size, edges beaded if directed, holes punched; including round headed screws, clout naiols or rivets and fixed to wood or steel members etc with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc as required. complete all as specified and as directed.

S&F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm center to center with GI cleat and steel expansion fasteners with including ceiling section (n.exc 1.2m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre, hangers 4mm dia GI (upto 1200 mm long length) adjusting level fixed in roof slabs be means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expension hold fasteners 12.5 mm dia 40 mm long complete all as specified and as directed.

S&F for 8 mm seamless calicum silicate made out of 1800x1200 mm size board of siliceous and calcareous material reinforced with cellulose fiber fixed to the ceilling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre,including finishing the joints of face board with specially formulated jointing compound and 48 mm wide fiber tape to provide seamless finish complete all as specified and as directed

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S&F for 8mm thick aluminium deco grill size of 75x75mm fixed to window with aluminium flat 30x3mm complete all as specified and as directed.

S&F for mild steel framed works such as grills, framed guard bars, etc and similar work conforming to Fe- 290 (Gde E-165) barred iron door,purlin rafter etc complete all as specified and as directed.

Taking down aluminium/copper point wiring (light, fan, socket or power) including unserviceable light fittings, switch board complete, switch sockets, ceiling roses, pendants, regulators, sockets, etc and removing materials from site and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size passing through and including suitable PVC conduit with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls /ceiling etc , including cutting chases, making good with cement mortar 1:3, terminated in and including providing modular metal flush box of suitable size with 3mm thick hylam sheet cover for fixing of switches, sockets, fan regulators etc for one light/fan/bell/buzzer point controlled by one, one way switches complete all as specified and as directed.

All as per item No. 69 here-in-before for one 3 pin socket outlet, 5 Amp independent complete all as specified and as directed.

All as per item No. 69 here-in-before for one 3 pin socket outlet, 5 Amp on same board with other switches complete all as specified and as directed.

All as per item No. 69 here-in-before but with 2.5 Sqmm complete all as specified and as directed.

M&L for Point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLSH PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box (sunken type) 3mm thick hylam sheet cover fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed.

S&F for switch piano, flush type single pole, one way 5 Amp complete all as specified and as directed.

S&F for socket outlet 2 in 1, 5 Amp flush type complete all as specified and as directed.

S&F for switch socket combination 2 in 1, 5 Amp flush type complete all as specified and as directed.

S&F for switch socket combination 5A/ 16A, 5 in 1flush type complete all as specified and as directed.

S&F for ceiling rose, 3 way PVC insulated body complete all as specified and as directed.

S&F for stepped type electronic fan regulator flush type complete all as specified and as directed.

S&F for 18 W surface and wall mounted LED batten with polycarbonate housing and intigrated complete all as specified and as directed.

S&F for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F for LED bulb of 9 Watt complete all as specified and as directed.

S&F for sheet metal enclosure for MCB DB double door single pole and neutral 8 way with common bus bar at incomming end complete all as specified and as directed.

S&F in repairs sheet metal enclosure for MCB DB double door single pole & neutral 4 way, 240 Volts with common bus bar at incomming end complete all as specified and as directed.

S&F for sheet metal enclosure for MCB, TPN, 4 Way, double door three phase complete all as specified and as directed.

S&F for MCB 'C' curve double pole 6 to 32 Amps with breaking capacity 10 kA complete all as specified and as directed.

S&F for MCB 'C' curve single pole 6 to 32 Amps with breaking capacity 10 kA complete all as specified and as directed.

S&F for MCB 'C' curve triple pole and neutral 63 Amps with breaking capacity 10 kA complete all as specified and as directed.

S&F in repairs MCB 'C' series single pole and neutral 6 to 32 Amps, breaking capacity 10KA complete all as specified and as directed.

S&F in repairs MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and as directed.

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/casing at any situation and making good disturbed surface after taking down the submain complete all as specified and as directed.

M&L for concealed sub main wiring with two runs of single core 6 sqmm PVC insulated, unsheathed multistranded copper conductor 1100 volts FRLSH cable, including one run of 6 sq.mm single core PVC insulated unsheathed multistranded copper conductor 1100 volts FRLSH cable as earth continuity conductor drawn through and including one run of PVC conduite heavy duty and connected accessories etc.,and connecting to common earth dolly complete all as specified and as directed. Note : Two runs of main cable, one run of earth continuity conductor cable and one run of PVC conduite shall be measured as one unit.

M&L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through PVC casing-caping complete all as specified and as directed. Note : Two runs of main cable, one run of earth continuity conductor cable and one run of PVC conduite shall be measured as one unit.

S&F for 25 W LED building security new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with hight power LED as lighting source and lens imbedded PC Cover having TOP OPENING seperate driver cmpartment with IP 65 protection and inpact resistance of IK07 complete all as specified and as directed. Make : Cat No ENDURAPEARLSL25WLED757SASYTOPC of Havells/Philips/Bajaj/ CG/Wipro.

M&L for clean dry sand in trenches for cushioning all as specified for cable protection complete as specified and as directed.

M&L for bricks of class 'B' type for protection of under ground cable in trenches complete all as specified and as directed.

S&F for galvanized steel tubing light grade, with fittings and mild steel clamps nut, bolts etc of 50 mm dia bore for cable protection on pole, road crossing or ground in pillar for fixing light etc complete all as specified and as directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross section area 50 Sqmm, 3.5 including all necessary connection complete all as specified and as directed.

S&F in replacement of conventional lights over poles of ht 7 mtr (approx) with new LED street light fitting of capacity 70W, with pressure die cast housing, toughned glass and individual LEDs with secondary optics and IP 66 protection, including new twin core 2.5 AI weather proof PVC insulated conductor for necessary electrical connections to the existing brackets for holdig the street light fitting alongwith minor modifications to match the light fitting in existing location complete all as specified and as directed. Make : Cat No. Endura Pearl Plus SL70WLED757SASYTOPC of Havells/Everyday/ Jaguar/Philips (Warrenty on Driver, LEDs and PCB for 5 years to be submitted by the contractor)

S&F for recess mounted deep drawn CRCA housing with higher power LED seamless front frame with flat white hight transmission acrylic cover complete all as specified and as directed. Make : Cat No PLUTONEO2X2PLR34WLED84OS of Havells/ Philips/Bajaj/CG/Wipro.

S&F in repairs 10 Watt Recess mounted pressure die-cast LED aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation with separate replaceable electronic driver included cutting-opening of ceiling any type & fixing arrangement for light fitting complete all as specified and as directed. (Make : Cat No. 10W LED, Ordering Code LHEBLDP7INIW010 of Havells/Philips/ Bajaj/CG/Wipro.

M&L Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4.0mm GI wire by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and as directed and tested on completion.

M/S AUTOMOTIVE WORLD

M/s BOM ENTERPRISES

Construction House

Vicky Construction

M/s. Chanda Construction

M/S CHAKRA GOHAIN

NChetia and Sons Trading

M/s GANDHESWAR PHUKAN

Bimal Trading Company