Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹20.0 Craccepted-aoc | ₹20.0 Cr | accepted-aoc |
Tender Value
₹18.5 Cr
EMD Value
₹18.5 L
Closing Date
12 Jan 2026, 8:30 pmClosed
Karnataka Power Transmission Corporation Limited
Establishing 2x20MVA, 66/11kV Substation at Bennavara in KGF taluk, Kolar district alongwith Construction of 10.733km of 66kV SC line (on 110kV DC NB towers with Panther conductor) from existing 66/11kV Kyasamballi S/S & providing 1no. of 66kV line TB at existing 66/11kV Kyasamballi S/S on Partial Turnkey basis (excluding 11kV Switchgear) including Supply, Mandatory spares, Erection, Civil Works of all materials/equipments, Testing & Commissioning.
253470
KPTCL/2025-26/SS/WORK_INDENT3083
Open
Sub-Station
KPTCL CEE Corporate Office Tendering and Procurement Bengaluru
12 documents required · 12 mandatory
Documentary proof for Clause No. 3.2(b)(i) of ITT (sub station)such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer.
Documentary proof for Clause No. 3.2(b)(ii) of ITT(Transmission lines) such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer
Cl.No.3.2(d)(A)(3) Qualifying Requirements for Power Transformer manufacturer as a Bidder: Shall upload Necessary documentary evidence for Cl.No 3(b) &(c) of Cl.No.3.2(d)(A) issued from Utilities such as P.O. copies, LOA/DWA, Performance Certificates issued by the end users (Indian Government Power Utilities) not below the rank of Executive/Divisional Engineer, should be uploaded along with the offer. Also. upload proof of cl. no. 3(a) of Cl.No.3.2(d)(A)
Audited financial statements including Balance sheets, Profit and Loss statements, Turnover Certificate in the prescribed format (Annexure-XX), Auditors Reports of the last five years preceding the date of bid submission of the Bidder & Consortium member(In case of Consortium)
Clause No: 3.6 of ITT: Assessed available tender capacity such as, i)existing commitments and ongoing works statement & countersigned by Employer in charge, not below EE or equivalent OR certified by CA/Cost Auditor & PO/Work Award copies ii) Self declaration iii) Certificate from CA for split details of Ex-works values and GST of Contract values of the works in the prescribed format as at Clause No. 1.5 of Section-3: Qualification Information by the lead Bidder and Consortium member(In case of Consortium).
clause no.3.3 (b) of ITT (Liquid Assets and /or availability of credit facilities) :Bidder shall upload Bankers Certificate of lead Bidder & Consortium Partner (if applicable) duly signed by authorized person in the prescribed format as at Annexure XVIII of Section-4.
self-declaration as sought in Clause No. 3.6 Note (ii) of ITT by the Lead Bidder & Consortium partner(in case of Consortium) stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct.
Type test reports of Power transformer as per Clause No. (3)(d) & (e) of Cl.No.3.2(d)(A).
Dynamic Short Circuit test reports as per Clause No. (3)(f) of Cl.No.3.2(d)(A).
Undertaking-1 wrt to Type test reports & Dynamic Short Circuit test reports if Power transformer manufacturer participates as a Bidder.
Self-declarations of Lead Bidder & Consortium partner (In case of Consortium) in respect of Litigation, dis-qualification due to non-performance, Risk & cost clause and Restriction on border sharing as specified in Annexure- XVI& Annexure-XVII as per Clause No.2.4of ITT
Consortium Agreement
Power of Attorney in favour of all the persons signing the documents, Power of Attorney for Consortium, combined power of attorney signed by the signatories of all the members of consortium and copy of Resolution passed by BoD/ all the Partners of the Firm
Valid Super Grade Electrical Contractors License of both Lead Bidder & Consortium partner (in case of Consortium) issued by the GoK or Valid Class A/Class-1 Electrical Contractors License issued by any state/central Government in India for Consortium partner
Certificate of Incorporation of the Individual/Consortium or any relevant document in respect of Partnership/Proprietorship firms as per the tender document
The bidder and Consortium Partner(in case of Consortium) should have valid GST registration with GSTIN number PAN Card and ISO Certificates.Note The successful Bidder and his consortium partner who have GST registration in other States should have GST registration in the State of Karnataka mandatorily at the time of execution of the Contract Agreement.
No Deviation Certificate
Letter of Undertaking as in Annexure V
Qualification and experience of key Personnel proposed for carrying out the Work
Description of the Tools & Plant available with them for execution of the Work
Undertaking to source the supply of equipment/material from KPTCL approved Vendors only
Undertaking to source the equipment/ material for the work from the Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India as per Annexure -XVII.
Copies of original documents defining the Constitution or Legal Status, place of Registration and Principal place of Business of the Bidder (Lead Bidder & Consortium Partner)
Declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets
Information on litigations in which the Tenderer is involved as per prescribed format as at 1.12 of Qualification Information
Undertaking from the Consortium partner agreeing that, in case the Lead Bidder failed to execute the contract, the consortium partner shall get the work done by the Agency who is having valid SGL issued by GoK as per the format of Undertaking-2.
Upload all relevant documents as per NIT, tender documents and technical specifications
All Undertakings sought in the NIT & tender document
All self declarations sought in Detailed NIT/Tender document
₹7,500
₹18.5 L
12 Jan 2026
31 Dec 2025
13 Jan 2026
31 Dec 2025
STATION SUPPLY PORTION-Work Indent-3083:
Power Transformers:
20MVA, 66/11kV TRANSFORMER.
66/11KV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with ...
Nitrogen Injection fire extinguishing system for Power Transformers-supply, erection & commissioning works etc., as per technical specification
72.5 kV SF6 Circuit Breakers - Total
ISOLATORS : 66 kV, 1250 A, 40 kA double break manually operated isolators with solid core Cylindrical post insulator, terminal connector suitable for Moose ACSR conductor/ 63mm Al. tube, marshalling b...
b) Upright mounting type without earth switch. (Live point height 4600mm)
ii)Upright mounting type without Earth switch. LPH 6350mm.
11 kV Isolators:
11 kV isolator, Double break 400 A, 25 KA capacity with rigid bi-metallic terminal connector suitable for coyote ACSR conductor for Capacitor Bank
11 kV Isolators:
11 kV isolator, Single break 400 A, 25 KA capacity with Roaster Switch with rigid bi-metallic terminal connector suitable for coyote ACSR Conductor for outgoing feeders
CURRENT TRANSFORMER : Oil filled Current Transformer 0.2s class with rigid bimetallic terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube with marshalling box etc., complete as per tec...
ii)66 kV class, 40 KA, CT of ratio 200-100 / 1-1-1A for Transformer.
For metering : Accuracy 0.2s, Burden 10 VA
For backup protection : Accuracy 5P20, Burden 30 VA
For differential /Distance protectio...
11 kV class, 25 KA, NCT of ratio 1200-800/1-1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos of Copper flats as ...
VOLTAGE TRANSFORMER :
VOLTAGE TRANSFORMER Single phase, oil filled, outdoor type VT with rigid bimetallic terminal connector suitable for Moose ACSR and marshalling box etc., complete as per technic...
Lightning Arrestors:
SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification:
i)60 kV, 10KA Metal Oxide with surge counter
Arrestor class : Discharge Class 3 (Sta...
ii)60 kV, 10KA Metal Oxide with surge counter
Arrestor class : Discharge Class 2 (Station Low Duty (SL))- for overhead lines
ii)9kV, 10KA class station class with connector and clamp
CAPACITOR BANK - 12.1 kV, 2.9 MVAr Star Connected, Double Bank
Design, engineering, supply, erection , testing & commissioning of Capacitor Bank with internal fuses, terminal connector, Neutral CTs o...
Control and Relay Panel:
Simplex complete as per technical specification
i)For power transformer 66/11 kV
ii)For 66 kV Transmission line
Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformity and interchangeability of Components.
2. The Accuracy class of meterin...
Fabrication, galvanising and supply of Mild Steel-Station & Mounting strutcures (excluding Bolts & nuts)-Total
Supply of galvanised Bolts & Nuts for Station structures , Mounting Structures-Total
C) 11 kV ODS and take off structure :
Double pole structure with 9.5 Mts. RCC poles, 300Kg WL and with provision for fixing 11 kV 400 A Roaster single break isolators & provision for fixing 9kV ligh...
BUS BAR FORMATION :
i. Moose ACSR - 66kV side
ii. Coyote ACSR
iii. Earth wire 7/3.15mm steel with clamps/lugs
Rigid Bus with Taps & Clamps :
i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter
b) 63mm size connecting isolator to vertical tap
ii)Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66KV side with rounded off end.
iii) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 66kV side
c) Expansion Type
iii) Post insulator clamps suitable for 63 mm Aluminium pipe & Post insulator solid core type - 66kV side
iv) Corona Bell suitable for Aluminium Pipe of size 75mm on 66kV
v) Flexible type terminal connector suitable for 63mm aluminum tube to connect isolators
v) Flexible type terminal connector suitable for 75mm aluminum tube to connect isolators
vi) End Cap suitable for 63 Al tube
i) Post insulators- Cylindrical solid core as per technical Specification
Solid Core Bus Post Insulator 66 kV class, 1Unit/stack.
Insulator & Hardware:
a. 11kV 90kN Disc insulators
b. Suspention Clamp and hardware suitable for MOOSE ACSR (66KV SIDE)
C Type Wedge Connector suitable for Moose - Panther (Line)
2.Post insulator clamp suitable for Single Moose ACSR and 66kV solid core insulator
Auxiliary Transformer:
Station Auxiliary Transformer with Copper winding & oil, outdoor type, 100kVA, 11kV/433V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5% ...
Double Pole Structure along with 9.5 mtr RCC pole, DP Set, H Frame, 11kV 400A Double break isolator and 9kV, 10kA surge arrestor (3 Nos), HG Fuse Unit,Angle for fixing HG fuse unit( pole clamps bolt &...
A) LTAC Panel (indoor),415 V as per technical specification comprising of voltmeter and ammeter, 1No. I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU + 2 nos. 3 Phase 32A O/G SFU + 14 O/G SFU, 6 nos. 3 Pha...
B) A.C. Distribution Box (Outdoor) :
AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A...
STATION BATTERY:
110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type as per technical specification
BATTERY CHARGER :
Battery charger suitable for 110 V, 200 AH, 55 cells Battery set with float cum booster type battery charger as per technical specification.
DC Distribution Panel (Indoor)
as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete...
LT Power Cable:1.1 kV Class Armoured Aluminium Cable with glands/lugs/ferrules:
a) 1.1 kV PVC Insulated 4X95 sq.mm Aluminium cable with glands / lugs / ferrules
Copper control cables:
1.1kV class PVC insulated Copper Control Cable with Lugs / Ferrules, Glands as per technical specifications
i) 19 Core x 2.5 Sq.mm.
ii)10 Core x 2.5 Sq.mm.
iii) 4 Core x 6.0 Sq.mm.
iv) 4 Core x 2.5 Sq.mm.
v) 2 Core x 2.5 Sq.mm.
vi) 2 Core x 6 Sq.mm.
vii)4CoreX25 sq.mm
viii)4CoreX10 sq.mm
11kV, XLPE Insulated UG Cable as per Technical Specification
a) 11kV Single Core, 1000 sq.mm Aluminium cable To be run from 66/11 kV transformers to 11kV switchgear).
b) 3CX240 sq.mm Aluminium cable (To be run from 11 kV switchgear to 11kV take off DP structure)
c)3CX95 Sq.mm Aluminium Cable( To be Run from 11kV Switchgear to Auxiliary Transformer)
d)ia) Cable Termination kits suitable for 95Sq. mm 3 Core as per technical specification.
d)ib)Cable Termination kits suitable for 95Sq. mm 3 Core as per technical specification.
d)iia) Cable Termination kits suitable for 240Sq. mm 3 Core as per technical specification.
d) iib) Cable Termination kits suitable for 240Sq. mm 3 Core as per technical specification.
e)iiia) Cable Termination kits suitable for 1000 sq mm Single Core as per technical specification.
e) iiib)Cable Termination kits suitable for 1000 sq mm Single Core as per technical specification.
Equipments required for establishing SCADA Communication as per KPTCL Specification
Note: Satellite communication required will be arranged by SLDC.
a. Remote Terminal Unit (RTU) 64 (I/O) Port
b.Data Concentrator Unit (DCU)
c.2kVA online UPS (230V AC 1 phase 50Hz)
Multifunction Transducer
i)Current Cables - copper core with c/s 4.0sqmm multistrand 4 core
ii)Voltage Cables-Copper core with c/s 2.5sqmm multistrand 4core
iii) Signal cables- armoured copper core with c/s 0.5sqmm multistrand 10core
iv)Control cables - copper core with c/s 1.5sqmm multistrand 10core
v)supply cables- Copper core with c/s 4.0sqmm multistrand 3core for AC input to UPS and UPS to RTU, conforming to KPTCL specifications.
vi) supply cables-1C x 32 Sq mm multistrand for battery conforming to KPTCL specification
Fire Fighting Equipments with necessary Mounting Stands
a. i. Mechanical Foam type extinguisher 50 Ltr. capacity
ii. Mechanical Foam type extinguisher 9 Ltr. capacity
b. Water type (gas pressure type) 9 Ltr. capacity
c. Carbon di-oxide type 4.5 kg Capacity
d.i Sand type G.I Buckets 15 Ltr. Capacity
ii. Steel stands for above to have 4 buckets to each stand.
MAINTENANCE TOOLS AND PLANTS
1.Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)
2. Telescopic ladder Aluminium 6 Mtr. Height
3.Ring spanner set- 12Nos per Set
4.Tube spanner set- 12Nos per Set
5. Pipe wrench 24 inch
6. Pipe wrench 18 inch.
7. Hydraulic Crimping tools up to 1000 sqmm
8.Rubber hand gloves (15 kV tested)
9.Rechargeable 5W LED Hand Torch
10.Insulated cutting plier
i. 12 inch size
11.Insulated cutting plier
ii. 8 inch size
12.Line live tester
13.Screw driver 18"
14.Screw driver 12"
15. Hammer 8 lbs
16. Hammer 2 lbs
17. Chain pulley block 5 ton cap
18.Hydraulic jack 5T capacity
19.Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. height.
21. Box spanners- 12Nos per Set
22.Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.
23.Insulation Tester Digital Type (megger) 2.5kV - 5 kV
24.Insulation megger 500 V
25.SF-6 Gas leak detector
26.Multimeter electromechanical
27.Multimeter Electronic
29.DC Voltmeter range -5V to + 5V
30.Hydrometer syringe suitable for vent holes
31.Specific gravity correction chart
32.wall mounting type holder for Hydrometer
33.Thermometer with wall mounting holder
34.Rubber appron
36.Protective goggle
37.Acid resisting jars (4 pint capacity)
38. Rubber shoes knee height
39. Glass funnel
40. Grounding sticks extendable upto 18 ft : 3 nos. of each 6 ft Sticks of 3 phase R, Y, B (3 nos. of 1 set)
Miscellaneous items (size/capacities to be got approved):
1.Rubber mats 1000 mm x 2000 mm x 12 mm size tested for 1.1kV class.
2.First aid box.
3.Shock treatment charts, hard board, laminated with coloured pictures & literature both in Kannada & English.
4. Water filter / Water purifier : Wall mounting type (Aqua-guard type).
5. Sub-station name board duly painted as per specification including erection & Civil Works
6. Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.
7.Door locks 7 levers (Navtal make) (Sizes and capacities to be got approved)
8. Danger board ( prohibited ) with support structure including fixing in front of the gate
9. Equipments name plates and earthing name plates including fixing at outdoor yard
Furniture for control room, staff and maintenance, staff, godrej / featherlite / chandan make :
1.Steel Almirahs 6 1/2 feet
2.Steel Almirahs 6 1/2 feet with glass panel doors.
3.Officer's tables
4.Steel slotted angle rack (big)
5.Steel slotted angle rack (small)
6.Steel dust bins
7.Executive Revolving chairs
8.S type arm chairs
9.Steel folding chairs
Station yard lighting (outdoor):
Note: 1 No. of Lightning / Lighting Mast (LM) type are proposed for lightning protection and for illumination of the station Yard. The quantity of lightning / lightin...
ii)Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...
iii)1.1kV class PVC insulated Copper Control Cable with Lugs / Ferrules, Glands as per specifications
2 Core x6 Sq.mm.
LINE SUPPLY PORTION-Work Indent-3083:
Tower parts- Mild Steel (excl. Bolts & nuts) - Total
Note: Rate on per t Basis.
Tower parts -Bolts & Nuts - Total
Note: Rate on per t Basis
Tower Accessories
1.Number Plates
2.Danger Boards
3.Circuit Plate
4.Phase Plate (set of 3 Nos.)
5.Earth bond of 300mm Long
6.Earth bond of 450mm Long
Grounding of tower with GI Pipe including the cost of GI pipe including GI wire.etc.,
i) Panther ACSR Conductor
ii)7/3.15 mm Ground Conductor
Insulators strings suitable for Panther ACSR CONDUCTOR for 110kV Line as per technical specifications:
a. 110kV, 90 kN Tension Type Composite Polymer Long Rod Insulators
b. 110kV, 90 kN Suspension Type Composite Polymer Long Rod Insulators
Insulator Hardware:
A.Single Tension Clamp with hardware and arcing horn suitable for 1x8nos. of 90kN insulator with sectional length 1160mm for Panther ACSR and arcing horn to suit Panther ACSR
B.Double Tension clamp with hard ware and arcing horn suitable for 2x8nos. of 90kN insulator with sectional length 1160mm for Panther ACSR and arcing horn to suit Panther ACSR
C.Single Suspension Clamp with hardware and arcing horn suitable for 1x7nos. of 90kN insulator with sectional length 1015 mm for Panther ACSR and arcing horn to suit Panther ACSR
D.Double Suspension clamp with hard ware and arcing horn suitable for 2x7nos. of 90kN insulator with sectional length 1015 mm for Panther ACSR and arcing horn to suit Panther ACSR
Accessories for Panther Conductor:
2.Repair sleeves
Vibration dampers for Panther
Pre formed armour rods suitable for Panther ACSR
Accessories for 7/3.15mm Earthwire:
2.Repair sleeves for 7/3.15mm Earthwire
3.P G Clamps for 7/3.15mm Earthwire
4.Single tension clamps (Bolted type)
Single Suspension clamps (bolted type) suitable for Ground conductor
Station Mandatory spare Supply
STATION MANDATORY SPARE SUPPLY PORTION-Work Indent-3083:
Circuit Breaker (CB):
Closing coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB
Tripping coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB
Terminal Pad (For one Complete Circuit Breaker) for 72.5KV CB
Terminal Connector (For one Complete Circuit Breaker) for 72.5KV CB
SF6 Gas (40% of total gas Qty. of Sub-Station)
Copper Contact fingers male & female (For one Complete Isolator for 72.5KV class)
Terminal Connector (For one Complete Isolator for 72.5KV Class)
Terminal Pad (For one Complete Isolator for 72.5KV Class)
Station Erection
STATION ERECTION (incl. Testing & commissioning) PORTION-Work Indent-3083:
Power Transformers:
66/11KV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 ...
CIRCUIT BREAKER :
SF-6 Circuit Breaker with terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting struct...
66kV Upright Isolators-Total
11kV Isolator -Total
66kV Current Transformer-Total
11 kV class, 25 KA, NCT of ratio 1200-800/1-1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos of Copper flats as ...
VOLTAGE TRANSFORMER :
VOLTAGE TRANSFORMER Single phase, oil filled, outdoor type VT with rigid bimetallic terminal connector suitable for Moose ACSR and marshalling box etc., complete as per technic...
Lightning Arrestors:
SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification:
i)60 kV, 10KA Metal Oxide with surge counter
)- for Transformers & overhead lines-To...
ii)9kV, 10KA class station class with connector and clamp
Control and Relay Panel:
66kV Simplex 110 V DC compatible to SCADA complete as per technical specification for Transformer & Line- Total
Station structure, Mounting Structures (including Bolts & nuts) -Total Weight
C) 11 kV ODS and take off structure :
Double pole structure with 9.5 Mts. RCC poles, 300Kg WL and with provision for fixing 11 kV 400 A Roaster single break isolators & provision for fixing 9kV ligh...
Formation of Main/ Cross Bus with Single Moose for 66 kV Bay (1 set per bay)
Note: Shall include Installing insulator strings complete with necessary Hardwares, stringing of the conductor etc.,
Erection of Tubular bus including fixing of clamp, connector jumper, corona ring etc, Complete as per instruction of Engineer in Charge.-Total
i) Post insulators- Cylindrical solid core as per technical Specification
Solid Core Bus Post Insulator 66 kV class, 1Unit/stack.
Auxiliary Transformer:
Station Auxiliary Transformer with Copper winding & oil, outdoor type, 100kVA, 11kV/433V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5% ...
Double Pole Structure along with 9.5 mtr RCC pole, DP Set, H Frame, 11kV 400A Double break isolator and 9kV, 10kA surge arrestor (3 Nos), HG Fuse Unit,Angle for fixing HG fuse unit( pole clamps bolt &...
A) LTAC Panel (indoor),415 V as per technical specification comprising of voltmeter and ammeter, 1No. I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU + 2 nos. 3 Phase 32A O/G SFU + 14 O/G SFU, 6 nos. 3 Pha...
B) A.C. Distribution Box (Outdoor) :
AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A...
STATION BATTERY:
110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type as per technical specification
BATTERY CHARGER :
Battery charger suitable for 110 V, 200 AH, 55 cells Battery set with float cum booster type battery charger as per technical specification.
DC Distribution Panel (Indoor)
as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete...
Laying of 1.1 kV Class Armoured Aluminium Cable,Coper Control Cable along with glands/lugs/ferrules
Laying of Communication Cables along with glands/lugs/ferrules
11kV Switchgear:11kV, 25KA, 500 MVA MCVCB switchgear 1600 A for incomer and 1250 A for feeders Out door type comprising of 2IC+12F+1BC+4CB+1AP (Remote annunciation cum Control panel) with CTs & PTs ...
Laying of 11kV UG Cables-Total
Fixing of Termination kit/Pothead for 95Sq. mm 3 Core & 240Sq. mm 3 Core Cable- Total
Fixing of Termination kit/Pothead for Single Core 1000 Sqmm Core Cable- Total
Equipments required for establing SCADA Communication as per KPTCL Specification
Note: Satellite communication required will be arranged by SLDC
a. Site survey, wiring, installation, testing and commi...
b. Site survey, wiring, installation, testing and commissioning of DCU (DCU installation to be done in RTU panel)
c.Wiring, Installation Testing and commissioning of UPS with batteries & cables
Integration of RTU, DCU and UPS with field equipments
Multifunction Transducer
Earth mat formation:
Supplying, Laying and welding of M.S.Flats 75X8 mm, applying ACB paint to welded portion and covering with earth as per the drawing/standard specification and consolidation.
Supplying, Laying and welding of M.S.Flats 50X6 mm, to be treated applying ACB paint to welded portion and covering with earth.
Supplying and Grounding of Equipment with G.I.Flat 75X8mm and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of ho...
Supplying and Grounding of Equipment with G.I.Flat 50X6mm and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of ho...
Supplying and Providing 32mm dia M.S.Rod 1.075m long earthmat spikes including heating, bending top 50/75mm overlap flattening and making spike edge at one end driving into the earth below the ground...
Providing 25 mm dia M.S. Rod 1.05 metre long earthmat spikes including heating, bending top 50 mm overlap flattening and making spike edge at one end driving into the earth below the ground level and ...
Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron weldi...
Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (nonpressure type) for earth pits including all lead and lifts etc.,
Deep bore electrode 40mm dia, 5mtr long( Min 10mtr spacing shall be maintained between any two electrodes):
Drilling 150mm dia bore
40mm dia MS Rods
GI flat for joining two rods by welding to obtain continous length
LINE ERECTION PORTION-Work Indent-3083:
i). Check survey to be conducted during construction stage: Conducting detailed check survey along the approved route duly following the route alignment, GPS Co...
Conducting drone survey of Transmission lines for collection of data along with Aerial inspection of EHV line corridor using LIDAR method for measurements of vertical,horizontal and ground clearnace o...
Installing insulator strings complete with necessary Hardwares, Installing and stringing of conductor/Earthwire including fixing of their accessories, etc.,
a. Panther ACSR conductor
b. Ground Conductor-7/3.15mm
Erection of Transmision Line Towers (including tower accessories,etc., except GI angle with Barbed wire & Grounding materials)
(i)The Bidders are required to quote the rates taking in to conside...
Tower accessories:
a. Supplying and fixing GI angle 45 x 45 X 5mm, 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5mtr length each at inner and outer surface of tower to ...
Supplying and fixing Barbed wire as per specification
c.Grounding of towers including cost of 40 mm dia 2.5 mm thick, class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation c...
Dismantling of existing super structure / tower/conductor:
Dismantling of existing super structure / tower material and despatching to the nearest MW stores (for LINES) - 66kV DC Towers-01No(DD+0)
Releasing of conductor in the existing line(Coyote)
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per
Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...
Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight
30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door we...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1cement : 4 coarse sand) including cost of all materials...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
Providing and fixing 100 mm sand cast Iron grating for gully trap.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weigh...
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer in charge.
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber b...
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing PTMT Bottle Trap for Wash basin and sink: Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, ...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...
SUBMERSIBLE CABLE
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...
PRESSURE GAUGE :
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
NON - RETURN VALVE :
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
ix) Control Panel BOARD-A:
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, A...
POWER CAPACITOR:
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Erection elctrification & Commissioning works of pumpsets :
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...
Main connections:
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour.32A
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32 A
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Modular multi-diameter cable sealing system which is waterproof,fire proof& rodent proof consisting of frames,blocks and accessories to be installed wherever the electrical(power/...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...
Supplying and fixing/replacement of Round/ Conical/ Diamond shaped HDPE Doom suitable for 125/160W post top lamp fittings
Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5mm (heavy type)
Providing and fixing factory made UPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance (plus or minus 1mm), with wall thickness 2.0 mm ((plus or minus 0.2 mm)...
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions more than 10MSA upto 20MSA f...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...
Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40A 4 pole
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board
Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT
Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947 125 A
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...
Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wa...
Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...
Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required No...
LINE CIVIL PORTION-Work Indent-3083:
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shorin...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Detailed NIT-WI3083.pdf
Tender Document • 2.17 MB
Sec-7-Spec.zip
Tender Document • 14.87 MB
Revised Sec11a-Techno-com-WI-3083.xlsx
Tender Document • 1.35 MB
Sec-8-Drawing.zip
Tender Document • 8.63 MB
Circulars and Guidelines.zip
Tender Document • 2.02 MB
Revised Tender doc-66Bennavara-WI3083.docx
Tender Document • 0.50 MB
Download all tender documents and submit your bid