Providing boundary illumination arrangement and allied works at P/H No.-I (OHR Site) of Krishnachandrapur ground water based W/S scheme under EMSD-I, PHE Dte. in 24Pgs(N).

Amount

Supply and delivery at site of GRP Filament wound Conical pole of 7 Mtrs length with base plate at bottom and internal junction box and 1 no. GRP single arm . [ Make - Fibrro Plastichem/ EPP/Any other approved]

Supply delivery at site of 45 watt LED Street light luminaire with pressure die cast aluminium housing ,heat resistant toughened glass with frame offering (IP-66) protection. (Make-Philips(Type-BRP 031 LED 45 CW MR PSU GR DX )/CGL/Similar type of approved make)

Supply delivery at site of Decorative Post top for 360degree indirect light, resistance to impact and corrosion(IP65 protection) . Make-CGL,Type-LPTO-40-CDL / Similar type of approved make)

Supply delivery at site of 1.1 KV grade 6 Sq.mm 2core Al.Ar. Cable (Make-Gloster/Mescab/Polycab/Havells/any other approved make) Cable should be supplied as per site requirement.

Supply and fitting fixing of MS water proof type looping cable box of size 250mm x 200mm x 100mm having 4 mm thick comprising of one 250V 5Amp kit-kat fuse unit, one Nutral link porcelain insulator,2 compression cable gland of 2 core,6 sqmm PVC Al Ar. Cable end having liked with rubber gasket line top cover with mechanical locking arrangement etc earthing terminal with lugs on steel tubular pole incl. supplying and fixing 40*6mm thick MS clamp with nut,bolts etc painting with anti-corrosive paint.

Fitting fixing the fixtures as in item no. (2 & 3) in poles & gate including making interconnection from pole box to fixture with 2.5 Sq.mm copper wire by supply fitting fixing of necessary fixing materials as per direction E.I.C.

Erection of above pole of item no 1 with sole plate etc as per direction of EIC above & below G.L. including C.C. foundation from the bottom of sole plate up to 0.75 mtr. Depth and making C.C. foundation in portion 6:3:1 above ground level neatly cemented finish (3mm thick ) including making provision of cable entry in the junction box of the pole including excavation and refilling of earth pit with shifted soil and ramming properly after damaging the existing.

Laying of above cable as in item no. 4 on wall/surface incl. S & fitting fixing of required nos. of MS saddles with earthing attachment , making holes etc. as necy. Mending good damages and painting all complete as per direction.

Finishing the end of cable as in item no. 4 by crimping method incl. supplying and fixing solderless socket , tapes, anticorrosive paste & jointing materials all complete as per direction.

Earthing the pole with ¾” inch dia x 6’ ft. long G.I. Earth spike along with 1 x 6 SWG G.I. wire, bolts, nuts and washers of suitable size driven up to a depth of 6.25’ ft. below G.L and restoring the surface duly rammed as per I.E. Rules and direction.

Testing commissioning the whole installation upto entire satisfaction of E.I.C.

Add: GST @ 18%

Add: Cess @ 1%

ELECTRICAL AND MECHANICAL ENGINEERING CORPORATION (BID ID -6032135)

Jal Pravahika Pvt. Ltd. (BID ID -6029670)