REPAIR TO LEAKAGE/SEEPAGE, SUNKEN FLOOR TREATMENT ,ROOF TRATMENT, ROOF COVERING WK AND REPAIRS TO JOINERY, FLOORING, PLASTERING, PLUMBING, SANITARY WORKS AND CERTAIN B/R WORKS OF OFFRS MNS OFFRS MD ACCN AT CHAFB

Amount

Demolition of plain cement concrete of any description and in any position all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost.

Dismnantling floor, hearth or wall tiling incl cement mortar bedding ( but not backing) and rubbish off the premisies complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost.

M&L Providing water proofing treatment with best quality acrylic polymer modified cementitious composite slurry coating approved brand over sunken floors & terraces as given hereafter :- The surface to be treated shall be clean from all debris and loose particles. All debonded particles shall be removed with wire brush and the surface should be clean and in SSD (Saturated surface dry) condition prior to the application, of Providing water proofing treatment with , acrylic polymer modified cementitious composite slurry coating of approved brand at recommended rate as per manufacture @ 2mm in 2 coats over the sunken slab as per technical specifications and as directed by Engineer-In- Charge.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) mixed with waterproofing treatment with using integral waterproofing Fosroc Conplast X421IC or equivalent techno commercially conforming to IS:2645 as per manufacturers instruction all as specified and as directed. (Note : WPC shall be measured and paid separately as supply only under relevent item)

M&L Plain cement concrete type F2 (1:7:12) using 40mm graded aggregate as in foundations, filling and mass concrete in sunken floor all as specified and as directed.

M&L for Non-skid ceramic tiles 7 to 8mm thick (square /rectagular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors set jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick in (1:4) complete all as specified and directed.

M&L for 25mm thk cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in sub base for flooring finished even and fair complete all as specified and directed..

M&L Non-skid ceramic tiles 7 to 8mm thick (square /rectagular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors set jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick in cement mortar (1:4) complete all as specified and directed.

M&L Glazed Ceramic tiles, coloured 350x250x7mm /450x 350x7mm in vertical surfaces such as dado/ skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including backing coat of 10mm thick cement mortar (1:3) complete all as specified and directed.

M&L Cementous Grouting where heavy leakage (5 Nozzles per SQ.MTS) as specified hereafter :- Thoroughly clean the surface of slab with wire brush and Fill the slab area to check the water tightness of the RCC slab / sunken slab prior to waterproofing treatment. Mark the leaking points and treat them to make the leaking spots watertight using injection cement grout mixed with MasterFlow 150 or low viscous epoxy grout using Master Inject 1315 by drilling the hole and fixing the nozzles using Master Emaco S 348 or equivalent (BASF/Fosrock/ Sunanda/ kerakoll/ Mapei) complete as directed by the Engineer-in-Charge. Note:Quoted Rate shall be inclusive of cement.

M&L Cleaning the joints of tiles in bathroom/Toilet/Kitchen flooring by removing with wire brush or any other means/material and make suitable for applying chemicals for joints.The joints to be filled with Nitotile EP gront of FOSROC or with techno commercially equivalent chemical and top coat to be filled with white or colour cement match to tile surface complete as directed by the Engineer-in-Charge. Note:Quoted Rate shall be inclusive of cement.

Demolition of brick work/stone boulder masonry , built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings etccomplete as directed by the Engineer-in-Charge.

M&L Pre-cast cement concrete block masonry with solid blocks,in PCC 1:3:6 Type C1 using (20mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed

Taking down cement plaster on brick or stone wall , concrete surface etc. including racking out joints, hacking for key ,scrubbing down with water etc. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost.

M&L 15mm thick rendering in cement mortar 1:4, on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L Preparation of new plastered surfaces of wall and applied two coats of cement base paint complete all as directed.

S&F 150mm dia PVC (SWR) pipes singlesocketed, in any lengthwith rubber ring joints, fixed to wall including dismantling of old pipe (sewage/rain water/any type) complete all as specified and as directed. General Notes for Item no 17.00 to 39.00 :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to Seventh Floor).

S&F 110mm dia PVC (SWR) pipes singlesocketed, in any lengthwith rubber ring joints, fixed to wall including dismantling of old pipe (sewage/rain water/any type) complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any lengthwith rubber ring joints, fixed to wall including dismantling old pipe (sewage/rain water/any type) complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any lengthwith rubber ring joints, fixed to floors including dismantling old pipe (sewage/rain water/any type) complete all as specified and as directed.

S&F in repairs 150mm bore PVC (SWR) bends of any radious all as specified and directed.

S&F in repairs 150mm bore PVC (SWR) bends with access door of any radious all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends of any radious all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends with access door of any radious all as specified and directed.

S&F in repairs PVC (SWR) double branch piece (double Y), with access door 110 mm bore.

S&F in repairs PVC (SWR) Branch piece single equal or unequal with access door 110mm bore.

S&F in repairs PVC (SWR) junction single (Single T) equal or unequal with access door 110mm bore.

S&F 75mm bore PVC (SWR) vent cowl all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) bends of any radius all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) bend with access door of any radius all as specified.

S&F in repairs PVC (SWR) double branch piece (double Y), with access door 75 mm bore.

S&F in repairs PVC (SWR) Branch piece single equal or unequal with access door 75mm bore.

S&F in repairs PVC (SWR) junction single (Single T) equal or unequal with access door 75mm bore.

S&F in repairs 75 mm bore PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified.

S&F in repairs for 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified.

Taking up or down steel tubing and connections, fittings etc including cleaning for refixing or removal to store for 15mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections, fittings etc including cleaning for refixing or removal to store for 20mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections, fittings etc including cleaning for refixing or removal to store for 25mm bore complete all as specified and as directed.

S&F GI tube medium grade galvanized (surface/conclealed) with all fittings 15mm bore and connections, complete all as specified and as directed.

S&F GI tube medium grade galvanized (surface/conclead) with all fittings 20mm bore and connections, complete all as specified and as directed.

S&F GI tube medium grade galvanized (surface/conclead) with all fittings 25mm bore and connections, complete all as specified and as directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling (surface/conclead) or laying in floors complete all as specified and as directed. General Notes for Sl Item no 43.00 to 48.00 :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work ( Ground floor to Seventh Floor).

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling (surface/conclead) or laying in floors complete all as specified and as directed.

Refixing 15 mm bore old steel tubing and connections in new or old position (wall, ceiling or floor) all as specified and directed.

Refixing 20 mm bore old steel tubing and connections in new or old position (wall, ceiling or floor) all as specified and directed.

Refixing 25 mm bore old steel tubing and connections in new or old position (wall, ceiling or floor) all as specified and directed.

S&F in repairs 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

M&L Cutting holes for pipes for a superficial area exceeding 150 Sqcm and not exceeding 400sqcm into or through brick walls built in CM and making good in cement mortar 1:3 or 1:2:4, type B1 complete all as specified and as directed.

M&L Cutting holes for pipes for a superficial area exceeding 150 Sqcm and not exceeding 400sqcm into or through stone wall built in CM and making good in cement mortar 1:3 or 1:2:4, type B1 complete all as specified and as directed.

S&F in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device suitable as well as for anglo indian WC complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern), EWC White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc complete all as specified and as directed.

S&F in repairs vitreous china squatt pattern, Orissa Pattern size 580x440mm White,with integral Foot rests and 'P' or 'S' trap, white, including provision of fixing bolts and connecting upto drain and flushing pipe etc including lime concrete bedding complete all as specified and as directed.

S&F in repairs PVC Flushing Cistern 10 Ltrs Capacity Syphonic action type with Flush pipe low level, with inlet ball valve,Float chain& pull & brackets, including making necessary connections to water supply pipe line and jointing to WC etc complete all as specified and directed.

S&F in repairs health faucet, brass chromium plated with wall hook and 1.00m long flexible pipes complete all as specified and as directed.

S&F in repairs vitreous China wash basin, white flat back, size 550x400mm including cutting for and pinning in ends of brackets or ereesing stand complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125 mm size complete all as specified and directed.

S&F in repairs wall mixer hot and cold mixing valve any type for 15mm bore pipe foam flow type complete all as specified and directed.

S&F in repairs Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm between flanges complete all as specified and directed.

S&F in repairs Stainless steel grating 125mm dia complete all as specified and directed.

S&F PVC waste pipe 32mm size for WHB in repairs complete all as specified and directed.

S&F PVC waste pipe 40mm size for sink in repairs complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 15 mm spindle change in stop cock ( open or concealed) of long and short type without damage to stop cock complete all as specified and directed.

S&F in repairs bib taps cast copper alloy CP fancy type with crutch or butterfly handle screwed down for iron pipe or brass ferrule of 15 mm bore complete all as specified and directed.

S&F in repairs 15mm bore stop valves brass chromium plated, screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipes complete all as specified and directed.

S&F in repairs 15mm bore stop valves brass (Concealed type) chromium plated with long shank and cup , screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipes complete all as specified and directed..

S&F in repairs 15 mm bore pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with long screwed shanks and flynuts screwed for iron pipes and fixed complete all as specified and directed.

Cutting chases , pinning in, making good to facings for any type wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting exceeding 20cm girth complete all as specified and as directed.

Cutting chases, pinning in. making good to facings for any type wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting exc 10 cm & not exc 20 cm girth complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated,semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as specified and as directed

Dismantling structural steel work of any description and any position including doors, gate but excluding framed trusses complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates( Fe -410-W (Gde-E-250) quality A) complete all as specified and as directed.

S&F framed work such as grills, grating, etc qith ends of bars shouldered and/or rivted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-formig to Fe.290. Gde-E-165 complete all as specified and as directed.

S&F Hand rails, half round or other steel section or core for wooden drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and as directed.

M&L Preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as specified and as directed.

M&L Preparation of untreated new steel surfaces of any description n.exc 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as specified and as directed.

M&L Preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint including necessary scaffolding up to 6th storey complete all as specified and as directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed.

M&L Providing, cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in roof kerbs, padding or mud stops, rounded or chamfered on edges complete all as specified and as directed.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1 :4, (5 mm thick with WP compound/liquid over 10 mm thick cement plaster in two layers) on fair faces of brick work or concrete surfaces with water proofing compound @ 200ml per 50kg of cement or as per manufacturer's instruction etc finished even and fair complete all as specified and as directed. (Note : WPC shall be measured and paid separately as supply only under relevent item)

M&L for rendering 10mm thick in cement mortar 1:3 on roof padding finished even and fair with approved water proofing compound @ 200ml per 50kg of cement or as per manufacturer's instruction all as specified and as directed. (Note : WPC shall be measured and paid separately as supply only under relevent item)

Supply only liquid water proofing compound complete all as specified and as directed.

M&L Water proofing treatment on horizontal and vertical surfaces with applying of oil bound bitumen primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0 Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 grm/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650 N/5cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch on application including minimum 10cm side over lap and 15 cm end lap applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.20 Kg/Sqm finished with solar reflective bituminus aluminium paint @ 0.10 kg per sqm including removing of existing water proofing treatment of any description and cleaning with roof surface with wire brush and water complete all as specified and as directed.

S&F in repair Ball brass valves, 20mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 25mm bore ball brass valve high pressure with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical or vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and dismantling existing water tanks and removing from site all as specified and as directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical or vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and dismantling existing water tanks and removing from site all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in old or new location position capacity exc 250 & n exc 500 ltr complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in old or new location position capacity exc 500 & n exc 1000 ltr complete all as specified and directed.

Removing demolished material ie building material concrete debris of any type etc to a distance of 09 KM beyond and up to 10 KM out of premises of metropolition area including loading, unloading by manually or by mechanical means complete all as specified and directed. (JCB and to be transported through trolly or tipper and staking at the destination as and when directed by Engr-In-Charge during execution.

M&L double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed.

All as per Item no 97.00 here in before but in Skirtings etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 10mm thick screed bed or bedding in CM 1:3 complete all as specified and directed.

M&L 25 mm thick Cement concrete type B1 1:2:4 using 20 mm graded stone aggregate as in levelling concrete finished even and fair to receive floor finshes complete all as specified and directed.

Demilition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost.

M&L Granite tiles in flooring /Kitchen platform (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost.

M&L Plain Cement Concrete Type C2, 1:3:6 using 40 mm graded aggregate in plinth protections and similar works inculding necessary form works complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement etc including necessary scaffolding up to 6th storey complete all as specified and as directed.

M&L Rendering 10 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement including necessary scaffolding up to 6th storey complete all as specified and as directed.

M&L Preparing new plastered surface of walls and applying two coats of cement base paint over a coat of primer through mechanical means including necessary scaffolding up to 6th storey complete all as specified and as directed

M&L Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of 1 mm thick wall care putty, complete all as specified and asdirected.

M&L Preparing new plastered surface of walls and applying three coats of white wash complete all as specified and as directed.

M&L Preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper through mechanical means over a coat of 1 mm thick wall care putty on ceiling complete all as specified and as directed.

Preparing newly plastered surfaces of ceiling and applying three coats of white wash through mechanical means complete all as specified and as directed.

Removing plants/herbs grown on walls/junctions with roots using herbicide chemical,rendering and making good of existing brick/ concrete surfaces up to 6th storey complete all as specified and as directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) and stacking at site where directed complete all as specified and as directed.

Taking down Chowkats or frames exceeding 1.5 Sq.m but n. exc 4.00 each (Without taking off shutters from the frames) and stacking at site where directed complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 Sq.m each and stacking at site where directed complete all as specified and as directed..

Taking down shutters of any description exceeding 1 Sq.m but not exceeding 2 Sq.m each and stacking at site where directed complete all as specified and as directed.

Taking down chowkat or frames not exc. 1.5 sqm and and stacking at site where directed complete all as specified and as directed.

Taking down chowkat or frames exc. 1.5 sqm and not exc. 4 sqm and stacking at site where directed complete all as specified and as directed..

Easing of door / window shutters of any size/ any number of panels for easy closing/ opening / tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding door bolts etc. all complete all as specified and as directed.

S&F 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by Rajshri / Fechon or techno commercially equivalent of having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dash Fasteners/Hold Fast of required dia and length, all as per specifications drawings (Material test certificate and authentication should be compoulsory provided by the manufacturing company) complete all as specified and as directed.

All as per Item No 119.00 here in before but frame size 65 mm x 100 mm complete all as specified and as directed.

Forming jambs,with cement mortar 1:6 etc., to openings for the item Nos 119 & 120 above, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed.

S&F in repairs 18/19 mm Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed.

S&F 0.90 mm decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

S&F 35mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and as directed.

S&F 35mm thick second class hard wood Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F 30 mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners.A minimum of 6Nos screws to be provided for each frame complete all as specified and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

S&F Factory made solid PVC Moulded door shutter, 28 to 30mm thick (stiles)with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back fac ,with particle board core supplying & fixing in frame at site as per specifications & drawing complete all as specified and as directed.

S&F Powder Coating (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F Powder Coating (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F Anodised aluminium grill (anodised transparent or dry required shed according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting to grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed.

S&F in repairs for 07 feet 04 pipes pully operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guid mounted on channel pair length 24 inch (distance between to pipes is adjustable) locking system to hide rope not, channel to be mounted or fixed with self taping screws provided in kits. Rope wiil be HDPE double core of 4mm dia fixing to ceiling as minimum weight of rope shall not be less than 7700 Gms /Unit (for 04 pipes).

Taking down existing steel window/ventilator shutters area n exc 1 sqm each and carrying out necessary servicing incl mild steel box type hinges, mild steel handles, nuts, bolts washers and welding/greasing/oiling etc for smooth functioning and taking down u/s hardwares and refixing with new hardwares and re fixing the window shutters in position complete all as specified and directed. Note : Windows are to be fixed upto 6 storeys of buildings.

Hacking out old broken glass (any thickness , size ,quality or description), from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putty square nexc 0.5 sqm in each pane complete all as specified and directed.

S&F 4.00 mm thick figured glass, pin type , glazing with oil putty in square in each pane complete all as specified and directed.

S&F Alluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples.

S&F in repairs stainless steel wire cloth 0 .36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs aluminium sheet of thickness 0.60mm & height 900 mm complete all as specified and directed.

Taking down existing aluminium door shutters area n exc 1.5 sqm each and carrying out necessary servicing incl greasing/oiling etc, for smooth functioning and taking down unserviceable hardwares and replacing with new hardwares and re-fixing the door shutters in position all as specified and as directed. Notes :- Hardwares wherever required to be replaced shall be measured and paid seperately at supply only rates under respective items of this schedule.

S&F in repairs 12mm thick prelaminated particle board interior grade prelaminated on one side with decorative choice lamination and with balancing white on the other side, fixed to aluminium frame work as in panel, etc complete all as specified and directed. Note : Clips wherever required shall be measured and paid seperately under respective items of this schedule.

S&F in repairs 5.5 mm thick sheet glass, ordinary quality, fixied with necessary glazing clips, in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs sliding locks suitable for sliding window shutters complete all as specified and directed.

Supply only rubber beading suitable for fixing glass panes to aluminum door shutters complete all as specified and directed.

Supply only neoprene beading suitable for fixing glass panes to aluminum door shutters complete all as specified and directed.

Supply only pivot hinges suitable for aluminium door shutters all as specified complete all as specified and directed.

Supply only pivot hinges suitable for stainless steel door shutters, fixed in repairs all as specified complete all as specified and directed.

Supply only 100mm size anodised extruded aluminium alloy butt hinges with galvanised mild steel hinge pin, complete all as specified and directed.

Supply only 150mm size Aluminium alloy extruded handle, anodised, cast type suitable for aluminum door/window shutters, complete all as specified and directed.

S&F 100mm MS butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 75mm MS butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) complete all as specified and directed.

S&F in repairs 100mm MS butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repairs 75mm MS butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs 150mm long Extruded aluminium handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs 125mm long Extruded aluminium handles, fabricated type, anodised complete all as specified and directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 200mm aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 150mm aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 100mm aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F in repairs aluminium alloy, anodized, 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 125mm aluminium anodised Hasp and staple, safety type fixed with screws complete all as specified and as directed

S&F in repairs 20 mm curtain rods of aluminium annodised powder coated fixed in existing brackets complete all as specified and directed.

S&F in repairs curtain rods brackets aluminium annodised powder coated fixed complete all as specified and directed.

S&F in repairs mild steel peg stays, 300mm long , suitable for steel windows fixed with necessary nut, bolt and washers, fixed in repairs complete all as specified and directed.

S&F in repairs mild steel 300mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs floor door stopper aluminum alloy and touge, anodised over all length of cover plate 140mm, with hard drawn steel spring all as specified and directed.

S&F in repairs 100mm size brass mortice lock, vertical type, 4 levers, incl plates and two keys, incl cutting holes into existing pressed steel frames, all as specified and as directed.

M&L welding mild steel members of thickness n exc 6mm as in repairs, welds n exc 2.5cm in length.

S&F in repairs stainless steel plate rack of size 990.60mm x 914.40 mm including fixing to wall as directed etc complete all as specified and as directed.

S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 630 x 450 mm size including cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.

Taking down existing vitreous china wash hand basins of any description and size alongwith brackets and Refixing the same wash basin in new or old position with and including new rag bolts of suitable size and making good the disturbed surfaces to match with the adjacent surfaces complete all as specified and as directed.

S&F in repairs 32 mm dia PVC flexible waste pipe for WHB 60cm long with union complete all as specified and as directed.

S&F in repairs 110mm PVC (SWR) traps 'P' or 'S' complete all as specified and as directed.

S&F in repairs plastic water closet seat black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified

S&F in repairs PVC float valve for use in PVC flushing cistern suitable for 20 mm bore inlet complete all as specified and as directed.

S&F in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern complete all as specified and as directed.

S&F in repairs syphon set for PVC flushing cistern complete all as specified and as directed.

S&F in repairs PVC/plastic handle for flushing cistern complete all as specified and as directed.

S&F in repairs 15mm bore long body bib taps, fancy type, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repairs 15mm dia. Bib tap standard of PTMT any colour high pressure screwed down for iron pipe(Min weight 15mm-90gms) ISI marked all as specified and fixed complete all as specified and as directed.

S&F in repairs 15mm dia.Stop valve standard of PTMT any colour high pressure screwed down for iron pipe(Min weight 15mm-90gms) ISI marked all as specified and fixed complete all as specified and as directed.

Repairs to tap any type including changing of spindal/ rubber washer etc if required complete all as specified and as directed for the following:- Note: (spindle will be measure separately and paid at supply rate only)

Bib taps

Pillar taps

Stop cock

Concealed stop cock

Supply only spindle brass suitable complete all as specified and as directed for the following:-

Bib taps

Pillar taps

Stop cock

Concealed stop cock

S&F waste coupling for stainless steel sink 75mm size, fixed in repairs, complete all as specified and as directed.

S&F waste coupling for stainless steel sink 100mm size, fixed in repairs, all as specified and as directed.

S&F in repairs PVC flexible pipe(wastepipe) suitable for 40 mm waste coupling complete all as specified and as directed.

S&F in repairs waste fittings, brass chromium plated for glazed ware sinks and basin etc with long screwed shanks and flynuts flanged and bedded in red lead cement and other ends fixed complete all as specified and as directed for the following:-

32mm bore

40mm bore

S&F in repairs heath faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixedin position complete all as specified and as directed.

S&F in repair bathroom cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall complete all as specified and as directed.

S&F in repairs CP soap tray fixed to wall with Chromium plated brackets /screws complete all as specified and as directed.

S&F in repairs stainless steel toilet paper holder of approved make complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repairs Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F in repairs 20 mm GI nipple threaded 100 mm long complete all as specified and as directed.

S&F in repairs 25 mm GI nipple threaded 100 mm long complete all as specified and as directed.

S&F in repairs GI union threaded for 20 mm GI Pipe complete all as specified and as directed.

S&F in repairs GI union threaded for 25 mm GI Pipe complete all as specified and as directed.

S&F in repairs GI reducer 25/20mm threaded GI Pipe complete all as specified and as directed.

S&F in repairs 20 mm GI tank nipple threaded complete all as specified and as directed.

S&F in repairs 25 mm GI tank nipple threaded complete all as specified and as directed.

S&F in repairs sinks with Dranage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unioun to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

Sri Vijalakshmi Constructions

SHREE HARI BUILDERS