SPL REPAIR TO EYE WARD AT AHRR UNDER GE E/M RR HOSP. DELHI CANTT-10

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantle Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar

Demolition of un-reinforced cement concrete in ground floors and pavings in any position thickness. (Below or above ground level) and removing rubbish off premisses n exc 500 m complete all as specified

M & L for 18 to 20mm thick granite of any type (table rubbed & polished) in jambs, pillars, window cills, plate forms, steps, crumple joints in CM (1:4) including pointing in white cement (1:2), using marble dust with admixture of pigment to match with shade of granite incl 15mm thick screed bad or backing layer in CM 1:4 (incl moulding of edges) complete all as directed..

M&L 15mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes all as specified.

M & L for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed.

M&L for 10 mm thick rendering as backing coat for fixing wall tiles in CM 1 : 4 complete all as specified.

M&L for glazed ceramic colour tiles in vertical surface of size 600 X 300 x 7-8 mm thick,over and including 10 mm thick cement palster in cm 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed.

M&L 3.2mm thick lead glass radiation resistence for x ray radiation fixing with all fitings and fixture complete all aspecified

M&L for Vitrified Ceramic tiles light shade 8-9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors/wall surface, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed.

M&L for Vitrified Ceramic tiles dark shade 8-9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed.

-ditto- as per Srl item No 11 above but in vertical surfaces complete all as spd and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area n. exc 1.50 Sqm each.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area exc 1.50 Sqm but n .exc 4.00 sqm each.

S&F factory made single extruded WPC (Wood polymer composite) soild door frame of size 65mmx100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fibers (wood powder/rice husk/weat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS scerws having min frame density of 750 Kg/cum, screw withdrawl strenght of 2200 N (Face) 1100N (Edge) min compressive strenght of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, water/moisture proof and fire retrandant complete all as specified and directed.

S&F factory made single extruded WPC (Wood polymer composite) soild plain flush door shutter of 35mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fibers (wood powder/rice husk/weat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS scerws having min frame density of 750 Kg/cum, screw withdrawl strenght of 2200 N (Face) 1100N (Edge) min compressive strenght of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, water/moisture proof and fire retrandant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed countersunk SS screw complete all as specified and directed.

S&F 3mm thick aluminium composite panel (ACP Sheet) including necessary clips, rubber packing & aluminium beading (aluminium frame ) and fixing to existing or new framework all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing., complete all as specified and directed.

S&F factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories

Supply only 4.8mm thick sheet glass, ordinary quality for fixing in windows, aluminium partitions and like, complete all as specified and directed.

S&F in repair toughened glass frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc and all kind of SS patch fitting & fixture, spider patch etc, complete all as directed.

M&L sensor for operating toughened glass sliding door with complete fittings and sliding accessories complete all as specified and directed.

S&F of stainless steel handle 450 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as directed.

S&F of SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size, complete all as directed.

S& F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

M&L for complete removal of old treatment on surfaces of walls through electrically operated grinder using sand paper for preparation of old decorated plastered surfaces of wall and applying two coat of oil emulsion distemper over one or more coat wall care putty (average thickness of 1.5 mm) complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surface to fair and even without using extra cement complete all as specified and as directed

M&L for preparation of newly plastered surfaces and applying one or more coat wall care putty (average thickness of 1.5 mm) to achieve smooth surface by sanding through electrically operated grinder using sand paper followed by two coats of distemper oil emulsion on wall surfaces complete all as specified.

Taking up or down tubing GI 15 mm dia incl all fittings complete all as specified

S & F 15mm bore medium grade concealed galvanised steel water tubing with all fittings fixed to wall or laid in floors, with and including for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc.

S&F of in repair vitreous china wash basin, white colour, flat back type, of approx size 580 x 450 mm (for hospital use) including waste coupling, wall bracket, waste pipe of suitable size etc, complete all as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as directed..

S&F in repair 10 liters PVC valve less syphonic action type flushing cistern, low level white with inlet, ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor.

S&F in replacement of 15mm dia PVC connection 45 cm (PVC), complete all as directed.

M&L in repair 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair of 15mm Bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed chromium plated, complete all as directed.

S&F in replacement of wash basin mixer, with out popup waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mm bore pipe, complete all as specified.

S&F in repair Toilet paper holder, vitreous China, box type fixed to walls with chromium plated (CP) brass screws

S&F in replacement of bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F in replacement of two way bib cock suitable for 15 mm bore water pipe, with & including wall flange, made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F in replacement of handshower (health faucet) with 8 mm dia, 1.0 M long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F in replacement of PVC made multipurpose cabinet with front door looking mirror of overall minimum size 350 x 450 mm, complete all as directed.

S&F in repairs for Cast iron floor trap of 75 mm outlet plain with grating including jointing to waste pipe in run lead fixed in cement mortar complete all as specified.

Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required.

S&F 100mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors or in trenches all as specified.

S&F cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors or in trenches, bore of pipe 75mm all as specified.

S&F for 100mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length fixed with cement joints fixed to walls, complete all as specified.

S&F for 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with cement joints fixed to walls, complete all as specified.

S&F for 100mm bore cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches all as specified

S&F for 75mm bore cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches all as specified.

S & F in repair MS stack clamps suitable for fixing CI pipe75 / 100 mm dia fixed to walls including drilling holes and all required fittings & fixtures. (wt of each clamp exc 0.3Kg but n. Exc. 0.36 Kg)

S&F anodised aluminium frame with powder coating of any colour for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F anodised aluminium door shutters with powder coating of any colour, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

M&L for rendering 15 mm thick in cement mortar 1:4 on brick or concrete surfaces using integral water proofing compound as per manufacture's instructions as in sunken floor complete all as specified and directed. Note: water proofing compound shall be measured for paid separately as supply only)

M&L for sealing of pipe penetration of toilets core cutting & sunken slab treatment in following stages:- (i) Supply and apply solvent free, moisture insensitive epoxy resin based patch repair putty Sika grade-694F (I) ,yield : 0.6ltr/kg suitable for submerged condition having compressive strength of 40N/mm²(1day) according to IS 9162-1979 on pipe penetration surface. The putty shall be applied to a groove thickness of minimum 20mm on pipe penetration joints to concrete penetration of surface of sunken portion. (ii) M&L for waterproof Sealing arround perimeters & wall to floor junction with Sika® Seal Tape-S special tape ,made of thermoplastic elastomer reinforced with polyester woven fabric for waterproof sealing around perimeters and joints in wet tiled areas specially designed for wet room. (iii) M & L for glass fibre reinforced acrylic modified cementtitious coating system as Top coat : Sika Top Seal -107@ 1.5kg/m² over reinforcement : Sika Fab-1 over base coat :Sika Top seal-107 @ 1.5kg/m² etc all as specified and directed. System should have compressive strenght:20N/mm²: bond strength :2.0N/mm² complete all as specified and directed. Note :- (i) Entire work shall be carried out through Manufacturar or his authorised representative. (ii) For guarantee, Refer Special Condition No 34.

M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) in sunken floor complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sunken floor complete all as specified

M&L for 40 mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in flooring complete all as specified and directed.

S&F PVC 18/19mm thick PVC moulded solid board ,one side prelaminated for cabinets boxes shutters,etc with shelf and shutters full size fitted under/above kitchen cooking platform and other platform complete all as direction of the Engr-in charge and the manufacturer complete all as specified and directed by Engr-in-Charge

S&F soft closing clip on hinge, full / half overlay type, of stainless steel, all as specified.

S&F multipurpose lock 50mm size with triple keys, suitable for cup board door/drawer , complete all as specified.

S&F of cup board / drawer knob of stainless steel with matt finish fixed with screw, complete all as directed.

S&F telescopic type ball bearing slide & runner, suitable for drawers, complete all as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as directed.

M & L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4

S&F in repair zebra blinds vertical type made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified .

Removal of demolished material or soil to a distance n.exc 500M and depositing where directed at a level n.exc. 1.5 M above the starting point.

S&F Door closer hydraulically regulated aluminium (extruded section body) designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Dismantling boarding, any description, fixed in any position with nails

S&F Solid PVC Wall panelling consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

M&L for Second class hard-wood in scantlings in framed work

Supply only 19 mm thick commercial block board having density more than 650 kg/cum Required size complete all as specified and directed.

M&L for 18 - 20mm thick italian marble (approved colour & Pattern & Size) machine cut fix to wall with 10 mm thick backing layer of premium quality adhesive paste (Hardner + Resin) for italian marble (MYK Laticrete / Roff / Tenax etc) with help of 10mm depth groove trowl over incl 15 mm thick layer of cement mortar 1:4 and joint filling with epoxy including with admixture of pigment to match with shade of italian marble stone including cutting, polishing and cleaning work complete complete all as specified and directed. Note:- (i) 50 mm thick foam sheet to be used for cutting of marble (ii) Vibrator and 10 mm depth groove trowl and other required tools to be used (iii) work to be execute through highly skilled labour (iv) Marble Adhesive will be approved by Engr-in-Charge before use

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

Taking down carefully unserviceable of aluminium point wiring complete except for ceiling or where not feasible fan/plug/bell but including fittings such as switches, ceiling rose, pendants, regulator etc. and making good disturbed surface to match with the existing surface of roof/ wall/ floor by applying putty and applying colour/ white wash finish complete all as specified and directed.

M & L for point wiring concealed type in PVC concealed conduit with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the One light/fan/bell/exhaust fan point controlled by one switch. Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates.

All as per srl item No. 81 here in before but point wiring for one socket outet point 3 pin 5 amps on the independent board.

All as per srl item No. 81 here in before but point wiring for one socket outet point 3 pin 5 amps on the same board.

All as per srl item No. 81 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point.

M and L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in existing conduit including 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including modular MS sunken box, modular white cover plate with frame, blanking plate etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point/fan/exhaust point controlled by one, one way switch 6/10 Amps complete all as directed. Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws, as applicable will be included in quoted rates.

All as per srl item No. 85 here in before but point wiring for one socket outet point 3 pin 5 amps on the independent board.

All as per srl item No. 85 here in before but point wiring for one socket outet point 3 pin 5 amps on the same board.

All as per srl item no. 85 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 3/5 pin 15 Amp power point on Independent board.

S & F Modular Switch 1 way 16 A, 1 Module

S & F Modular Socket 6 / 16 A - 2/3 Pin combined 2 module

S & F Modular Switch 1 way 6 /10 A, 1 Module

S & F Modular Socket 6 / 10 A - 2 / 3 Pin combined 2 module

S & F Modular fan regulator step type, 120W 2 Module

S & F of Ceiling rose surface Polycarbonate type with three terminals 240 Volts complete all as specified and directed.

S & F in replacement of Modular AC /Geyser Box, power socket with 3 pin plug top, 16 A, 240 Volts AC complete with one mini SP MCB single pole 20 Amps concealed/ flush to wall surface complete all as specified and directed.

Supply of surface/wall mounted 20W LED batten. Luminaire made up of Extruded Aluminum Housing with PC diffuser. the luminiare should be with IP 20 from dust. The LEDs used should have CRI ≥ 80 and CCT 6500K. Luminaire system efficacy of ≥ 100 lumen/watt. The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 2.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ. The luminaire Working Temp. range should be from 0⁰ to 50⁰C.

S & F in replacement of comfort bed light fitting for patient bed for Hospitals in extruded aluminium housing with PMMA diffuser having system wattage of 31 Watts (CCT-5700) having three lights and having personalised bidrectional up & down light for pleasant and smoothing light experience including 03 Nos switches for each light complete all as specified.

Supply of surface/wall mounted 10W LED batten. Luminaire made up of Extruded Aluminum Housing with PC diffuser. the luminiare should be with IP 20 from dust. The LEDs used should have CRI ≥ 80 and CCT 6500K. Luminaire system efficacy of ≥ 100 lumen/watt. The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 2.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ. The luminaire Working Temp. range should be from 0⁰ to 50⁰C.

Supply and fix in repair of recessed 36 W LED 2X2 panel backlit type only. Luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have CRI ≥ 80 and CCT 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire system efficacy of ≥ 120 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs. The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 3.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ . The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards.

Taking down unserviceable sub main wiring of aluminium any type with earth wire and making good disturbed surfaces of wall/ floor or roof etc and applying putty complete all as specified and directed.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit with wall thickness 1.6mm thick and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete all as directed. Note : 1. The two run of 4 Sqmm wire, one run of 4 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit. 2. Cutting chases required for sub main wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing shade of surface shall be deemed to be included in the unit rate quoted by the contractor.

All as per srl item No. 101 here-in-before but 2 run of 10 Sqmm copper conductor cable including 10 Sqmm copper conductor as earth wire.

All as per srl item No. 101 here-in-before but 4 run of 16 Sqmm copper conductor cable including 16 Sqmm copper conductor as earth wire.

S & F in replacement MCB, SP, 6 to 32 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed

S & F in replacement MCB, SP, 40 to 63 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed

S & F in replacement MCB, SPN, 40 to 63 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed

S & F in replacement MCCB, 415 Volt, 16kA, 4 pole, 125 Amp capacity with over load and short circuit protection complete all as specified and directed

S & F in replacement MCB, 415 Volt, 16kA, 4 pole, 63 Amp capacity with over load and short circuit protection complete all as specified and directed

S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, VTPN 12 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCBs / MCBs and isolators etc and making all necessary connections complete all as specified and directed.

S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, VTPN 4 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCBs / MCBs and isolators etc and making all necessary connections complete all as specified and directed.

S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed.

S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed.

Taking down carefully ceiling / exhaust fan of any size, sealing cable end, dismantling blades & removing fan and blades deposited to MES store complete all as directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed

Painting of ceiling/Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as directed

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan all as directed.

Supply & fix Air Circulator fans 230 volts single phase 450 mm sweep, Air delivery 110CMM, Speed 1200 RPM , UP/Down tilt for adjustable air direction and suitable for wall mounting complete all as specified and directed.

Taking down existing fire alarm system incuding panel, detectors, music speaker, AC diffuser etc and refixing it complete including all fixing accessories complete all as specified and directed.

M & L Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all by means of nuts and bolt check nuts and washers of galvanised iron sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to and including earthing test point complete including testing filling of adequate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil up to 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made but at 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed.

M & L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire

M/S Parmod Johar (BID ID -3359674)

ACR ENTERPRISES (BID ID -3359006)

sony engineering works (BID ID -3359194)

R D ENTERPRISES (BID ID -3356708)

HARICHAND CONSTRUCTION (BID ID -3359542)

B.R. Enterprises (BID ID -3359335)

SURESH KUMAR SHARMA & CO (BID ID -3359607)

siddharthenterprises (BID ID -3359102)