REPAIR/ REPLACEMENT/ OVERHAULLING OF FIRE FIGHTING SYSTEM AND CERTAIN REPAIR TO FIRE PUMPS AND MOTORS AND CONNECTED WORKS UNDER AGE E/M II UNDER GE(CENTRAL) KHADKI

Amount

M&L for Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for taking out or laying of pipe line and getting out in Hard/dense soil complete all as specified and directed by Engr-in-Charge.

Returning filling in, trenches around pipe line including spreading levelling in layers n.exc 25 cm after laying pipes and well ramming all as specified and directed by Engr-in-charge.

Removal of surplus excavated soil to a distance n.exe. 50 mtr away from site and deposited where directed at a level not exceeding 1.5 mtr above the ground level all as specified and directed by Engr-in-charge.

Dismantling of stone sett paving laid bedded and pointed in cement mortar of any description or thickness completed all as specified and directed by Engr-in-charge.

Demolition of cement concrete in ground floors and paving n exc 15 cm thickness ( below or above ground level) all as specified and directed by Engr-in-charge.

M&L for cement concrete 1:4:8 type D-2 ( using 40 mm graded agg) as in sub base for stone sett paving complete all as specified and directed upto 100 mm thick finished even and fair all as specified and directed by Engr-in-charge.

M&L for stone sett flooring with stone setts of size 200 to 150 mm long ,150 to 200 mm wide and 150 mm deep and sides dressed, bedded in cement mortar 1:3 joints 20 mm thick ; grouted in cemnt mortar 1:2 with an admixture of metallic floor harder 5% by weight of cement and struck flush complete all as specified and directed by Engr-in-Charge.

All as item no 7.00 above but except stone complete all as specified and directed by Engr-in-Charge.

M&L for flush pointing 20 mm thick to stone sett paving any description in cement mortar 1:3 with an admixture of metallic floor hardner 5% by weight of cement all as specified an directed by Engr-in-charge.

Removal of debris ( concrete, broken stone etc.) to out side defence land (distance exceeding 1.5 KM but n.exc 5KM from the site ) and depositing where directed by Engr-in-charge.

M & L for Dismantling/Cutting/Removing the unsv CI pipe of size upto 350mm dia, cutting damaged pipe, insertion of fittings, fixing of mechanical joint, including making good the work space complete all as directed by Engr-in-Charge. Note :- (i) Any addition / alteration of exiting pipe , necessary welding work and T&P required for completion of job is included in the unit rate. (ii) Pipe, mechanical joint, fittings and earth work will be measured and paid separately under relevent items

Supply only Mechanical joint coller coupling long sleeve with rubber washer, mild steel screw bolts (machine made) with both ends screwed of dia as per flange hole and required length each screwed end to be fitted with washers and hexagonal nut suitable for 100mm CI/DI/MS pipe complete all as directed by Engr-in-Charge.

All as per item No 12.00 above but of pipe size 150mm dia

All as per item No 12.00 above but of pipe size 200mm dia

All as per item No 12.00 above but of pipe size 250mm dia

Supply and Fix in replacement Cast iron pipe fittings such as of coller ,bends,tail piece, of size upto 350 mm dia incl gasket , nutbolts,handlel etc all as specified and directed Engr-in-Charge.

M & L for laying in replacement of MS ERW Pipes of 200 mm dia size including all specials in any lengths & welding , cutting , bending etc complete laid in trenches/in duct/along wall/floor all as specified and directed by Engr-in-Chage.

All as per Item No 17.00 above but of size 150 mm dia .

All as per Item No 17.00 above but of size 100 mm dia .

All as per Item No 17.00 above but of size 80 mm dia .

S&L in replacement of Galvanised Iron Pipe of 50mm dia size, medium grade with all fitting, laid in trenches all as specified and directed by Engr-in-Chage

All as per Item No 21.00 above but of size 40 mm dia.

All as per Item No 21.00 above but of size 25 mm dia .

Supply and Lay in replacement of Cast Iron Pipe of 200 mm dia size with flanged ends centrifugally cast, Class B, in any length, laid in trenches all as specified and as directed by Engr-in-charge.

All as per Item No 24.00 above but of size 150 mm dia

All as per Item No 24.00 above but of size 100 mm dia

All as per Item No 24.00 above but of size 80 mm dia

S & F in replacement of fire hydrant landing valve, SS, Single headed outlet of 63mm dia size including all fittings all as specified and directed by Engr-in-charge.

S & F in replacement of fire hydrant landing valve, SS, Double headed outlet of 63mm dia size including all fittings all as specified and directed by Engr-in-charge.

S & F in replacement of Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle short all as specified and directed by Engr-in-charge.

S & F in replacement of 63mm dia 15 mtr long hose confirming to IS 636 complete with male and female coupling confirming to IS 903 all as specified and directed by Engr-in-charge.

S & F in replacement of hose reel of 15/20mm dia and 30 mtrs long confirming to IS 5132 all as specified and directed by Engr-in-charge.

S & F in replacement of Hose box Out door type made of MS sheet 750mm x 600mm x 250mm with double door with 4mm thick glasses and door frame made of MS sheet painted fire red outside and brilliant white inside complete all as specified and directed by Engr-in-charge.

S & F in replacement of Flanged stand post CI of 80mm dia 1.5m height including all necessary earth work, PCC work and necessary welding work for fixing all as specified and directed by Engr-in-Charge

S&F fabricated MS bracket /supports for MS and CI Pipe line, made out of angle iron and flat iron including bolts, nuts, washers and painting with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed by Engineer-in-charge.

Supply and Fix Sluice Valve 200 mm bore size type 1.6 PN with MS Spindle including taking out old sluice valve complete all as specified and directed by Engr-in-charge.

Supply and Fix Sluice Valve 150 mm bore size type 1.6 PN with MS Spindle including taking out old sluice valve complete all as specified and directed by Engr-in-charge.

Supply and Fix Sluice Valve 100 mm bore size type 1.6 PN with MS Spindle including taking out old sluice valve complete all as specified and directed by Engr-in-charge.

Supply and Fix Sluice Valve 80 mm bore size type 1.6 PN with MS Spindle including taking out old sluice valve complete all as specified and directed by Engr-in-charge.

S & F in replacement cast iron Foot valve of confirming to IS 4038, all as specified and directed of size 200mm dia.

M&L for replacement of PVC insulated, and sheathed LT copper cable 70 sq mm Single core armoured 1100 volts capacity for pump motor to starter connection with necessary lugs and bolts,screws all as specified and as directed.

M&L for cutting,clearing bushes/small plants and grass surrounding the E/M installations and removing the debris to a distance of 50m complete all as specified and directed at site.

M&L for rectification of leakage from CI/DI/ERW/GI pipe of size upto 80/100 mm dia incl burning out lead joint in position including recovering lead and making new lead joint or welding work any type replacement fittings all as specified including bailing out water lines all as directed by Engineer-in-charge. Note: earth work and fittings will be measured and paid under respective item.

All as per item No 43.00 above but pipe size 150 to 350mm dia .

M & L for removing the existing defective sluice valve spindle with check nut of any size and type from existing sluice valve of size 80 mm to 100 mm dia and replacement with new sluice valve spindle with check nut complete incluiding new nut,bolts and gland packing as per existing complate all as directed. Note - (i) The contractor shall repair and refixing the spindle assembly within two days from the date of opening and making it functionable. (ii) Complaint will be notified to contractor on mobile phone at any time between 0800 hrs to 2200 hrs and defect,s will be rectified within two days after notification, failing which Rs 500/- per day will be recovered

All as per item No 45.00 above but size 150 to 350mm dia .

M & L For preparation of the old painted surface of 80 to 200 mm bore CI/GI/MS Pipe and applying two coats of synthetic enamel paint in different colours as per colour code complete all as specified and directed by Engr-in-Charge.

M&L for disconnecting and taking down carefully Electric driven pumping set of capacity 30HP (motor and pump) from foundation, disconnecting suction and discharge water line for carrying out repair work of pump set, dismantling of pump set, cleaning, repair replacement of all unserviceable parts, reassembling complete pumping set, reinstalling , mounting and fixing on base channel on existing foundation and coupling properly to existing motor with proper balancing and alingment including recoupling of suction and discharge line, testing on full load for smooth functioning all as specified and as directed. Note: (i) Rates including minor spares like gland, grease, nut bolts and major spares will be measured and paid separately and rate quoted shall be deemed to be included for fixing of new spares under these items. (ii) Contractor should visit site before quoting the rates. (iii) Cost of transportation shall be deemed to be included in the rate quoted for these items. (iv) While taking out pump for repairs , the contractor will make arrengement pluging suction and discharge line with dead flanges without extra cost, so that pumping of installation is not disturbed and there is no leakage of water. (v) The contractor shall repair and refix the pump set within 04 working days from the date of opening and making it functionable .

All as per item No 48.00 above but Pump Size 75 HP .

All as per item No 48.00 above but Pump Size 270/313 HP.

Supply only Pressure gauge 0-30 PSI with 15mm valve & connector all as specified and directed.

Supply only MS shaft suitable for pump of capacity 30 HP

Supply only Impeller bush brass suitable for pump of capacity 30 HP

Supply only Brass Impeller suitable for pump of capacity 30 HP

Supply only Gasket set suitable suitable for pump of capacity 30 HP

Supply only Gland bush /Shaft sleeve (As per sample) suitable for pump of capacity 30 HP

Supply only MS Coupling suitable for pump of capacity 30 HP

Supply only Bearing suitaible for pump of capacity 30 HP

Supply only MS shaft suitable for pump of capacity 75 HP

Supply only Impeller bush brass suitable for pump of capacity 75 HP

Supply only Brass Impeller suitable for pump of capacity 75 HP

Supply only Gasket set suitable suitable for pump of capacity 75 HP

Supply only Gland bush /Shaft sleeve (As per sample) suitable for pump of capacity 75 HP

Supply only MS Coupling suitable for pump of capacity 75 HP

Supply only Bearing suitaible for pump of capacity 75 HP

Supply only MS shaft suitable for pump of capacity 270/313 HP

Supply only Impeller bush brass suitable for pump of capacity 270/313 HP

Supply only Brass Impeller suitable for pump of capacity 270/313 HP

Supply only Gasket set suitable suitable for pump of capacity 7270/313 HP

Supply only Gland bush /Shaft sleeve (As per sample) suitable for pump of capacity 270/313 HP

Supply only MS Coupling suitable for pump of capacity 270/313 HP

Supply only Bearing suitaible for pump of capacity 270/313 HP

M&L for disconnection/dismantling of electric motor 3 Phase, 415 Volt, from installation & transporting to workshop for rewinding , taking out old unserviceable burnt winding and rewinding the same with super enamelled copper wire of same guage/size to get the same output of motor including material such as varnish, sleeves, leothariod paper etc and refixing the same in position with proper alignment, balancing and testing of capacities 30 HP all as specified and directed by Engr-in-Charge.

All as per item No 73.00 above but Pump Size 75 HP .

All as per item No 73.00 above but Pump Size 270/313 HP .

OM INFRA

industrial suppliers

AN-ICON Engineering Technologies and Infrastructure Developments Pvt. Ltd.

shakti engineering and electrical works

sapana enterprises

Shree Ayyappa Engineering

cooltech engineering services