Loading
Loading…
Loading…
Tender Value
₹91.0 L
EMD Value
₹1.8 L
Closing Date
7 Jul 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Revenue
SR.DEN/W
25 conditions · 4 needing a document upload
No Technical and Financial credentials are required for tenders having value up to Rs 50 lakh
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments'' in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authority of the government Departments or Semi-Government/Public Sector Undertakings for the value of the work done for them during the qualifying period including current financial year certifying the bill amounts paid Agreement-wise and Date-wise or attested photo copy of such certificate. Such certificates will be accepted only from Govt. / Govt. bodies / PSUs authorities. Certificates issued by Private Bodies will not be considered.
NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets or Provisional Balance sheet. (iv) (v) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.2 of J.V guide lines of IRSGCC April - 2022 [with up to date correction slip].
(a) The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Tenderer shall carefully read clause No. 10 including clause no. 10.1 to 10.5 of IRGCC April 2022.
The total value of similar nature of work completed during the qualifying period and not the payments received within qualifying period alone, shall be considered. In case, final Bill of similar nature of work has not been passed and final measurements have not been recorded, the paid amount including statutory deductions will be considered. If final measurements have been recorded and work has been completed with negative variation, then also the paid amount including statutory deductions will be considered. However, if final measurements have been recorded and work has been completed with positive variation but variation has not been sanctioned, original agreement value or last sanctioned agreement value whichever is lower shall be considered for judging eligibility.
In case JV firms are allowed to participate, Technical Eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.1 of J.V. guide lines of IRSGCC April-2022 [read with up to date correction slip].
The value of work completed will not include the cost of any materials issued free of cost by the Railway/ Department concerned. Price Variation amount, if any; if indicated / incorporated in the experience certificate will also be considered towards eligibility.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
The work experience certificate shall be in the name and style of the 1.5.1 tenderer participating or as per provisions under Clause 17.15 of GCC April-2022 for JV Firm, if eligible to participate.
The work experience certificate shall be issued by an officer not below the rank of JA Grade or Bill passing Officer in Railways and Bill passing Officer/Executive In-charge of work in other Govt. / Govt. bodies / PSUs. The certificate should bear the signature and seal of the issuing officer, name of the department etc. In case tenderer submits work experience 1.5.2 certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any rehabilitation/construction of under water structures or any major bridge sub structure (having minimum span of 12m and above)
80 conditions · 25 needing a document upload
Uploading of Proforma-18 attached with Tender document (Certificate signed by Tenderer and Chartered Accountant), w he n balance sheet for the first previous year is yet to be prepared/ audited.
TENDER SHALL BE REJECTED if it is not accompanied by the following
Uploading of Proforma (Proforma-16) attached with Tender Document for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores.
Uploading of Proforma (Proforma-17) attached with Tender Document for Certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores.
Bid Security deposited through IREPS e-payment or as per provisions under Clause 5 (2) Part-I of GCC April 2022.
In case of Partnership firm: The tender form shall be submitted only in the name of partnership firm.
In case tenderer is JV Firm : The tender form shall be submitted 2.3.2 only in the name of the JV and not in the name of any constituent member.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender 2.3.3 documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90days beyond the bid validity period.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured:- i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered to the Divisional Railway Manager(Works),2nd floor, Irwin Road,South Western Railway, Mysore-570001, within 5 working days of deadline of submission of bids. iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the 2.3.4 data entered during bid submission time, failing which the bid will be rejected. vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to the Divisional Railway Manager(Works),2nd floor, Irwin Road,South Western Railway, Mysore-570001 viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder. ix. The benificiary for the PG will be Senior Divisional Finance Manager, South Western Railway, Mysore
Proforma-16 for self-certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement order value less than of Rs. 10 Crores. OR Proforma-17 for Certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. Provisions of Make in India Policy 2017 (revised during 2024 vide Department for Promotion of Industry and Trade, Ministry of Commerce and Industry's letter No. P-45021/2/2017-PP (BE-II)-Part(4)Vol.II dated 19.07.2024) issued by Govt. of India, as amended from time to time, shall be followed for consideration of tenders.
Uploading of Proforma -18 attached with Tender document (Certificate signed by Tenderer and Chartered Accountant), w he n balance sheet for the first previous year is yet to be prepared/ audited.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) documents shall be submitted according to clause 14 of IRGCC 2022:
HAS-MAJN Sec: Repairs of damaged piers of bridge No.118 at km.40/11-14 (Pier No 2 & 3) across Hemavathi River and bridge No 400 at km.108/200-300 (Pier No 2) across Kumaradhara River as per level-II under water inspection.
20MYS26of15-06-26itno01
20MYS26of15-06-26itno01
Open
Works - General
8 Months
Dharwad, Karnataka
₹0
₹1.8 L
7 Jul 2026
15 Jun 2026
23 Jun 2026
21 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 90,99,226.5 | ||
| — | 600.00 | — | — | ||
| Providing men, machinery and accessories of underwater pressure water jet and remove the loosely adhered impurities cum marine growth over the RCC surface thereby cleaning of cavity / cracks / joints/ honeycombed areas and making them ready for further repair works or other pre treatment if any; the rate to include underwater divers, related accessories and life support equipments,over water equipment cum support boat, etc complete (Rate inclusive of GST and other prevailing taxes) | — | — | — | 3,89,400 | |
| — | 80.00 | — | — | ||
| Drilling hole in reinforced cement concrete of 12 milimetre / 18 milimetre diameter to a depth of minimum 100 milimetre across the crack to an angle of 45° at the rate of 500 milimetre C/C, using pneumatic drilling machine without disturbing the epoxy mortar filled on the "V" groove with the help of under water divers. The nozzle shall be inserted in the drilled hole and fixed using the under water polyester resin grout and allowed for curing for final set. The item includes the cost of all materials, hire charges for all machineries and all charges for under water divers with accessories, excetra complete. | — | — | — | 92,484 | |
| — | 400.00 | — | — | ||
| Grouting with Water Insensitive Underwater Epoxy Grout Base and hardener shall be mixed with using hand held heavy duty electrically operated mixing machine until uniform mix is obtained. The mixed material shall be poured in to the high pressure grouting machine container and grouted through the non-return nozzle already fixed on cracks. The grouting shall be done from the bottom of crack until grout rejects of all other grouting ports. The grouting shall be carried out with the help of under water divers and underwater communication device to know the conditions. The item includes the cost of all materials, hire charges for all machineries and all charges for under water divers with accessories, excetra complete. | — | — | — | 9,97,920 | |
| — | 750.00 | — | — | ||
| Filling voids / honeycomb with high pressure injection grouting of polymer above and under water cement grout (10 percent of polymer by weight of cement). Above and under water excetra complete. | — | — | — | 1,53,562.5 | |
| — | 900.00 | — | — | ||
| Drilling holes and adding shear connectors with Lokfix chemical anchor and add nominal reinforcments around periphery of pier,etc,complete. (12 mm dia rebar / 16 mm dia hole and 120 mm deep)Rate inclusive of GST and other prevailing taxes (rate of steel will be provided extra) | — | — | — | 8,36,325 | |
| — | 2750.00 | — | — | ||
| Providing and fixing of mild steel/TMT rebars of required dia at a spacing of 200 mm c/c including cutting, bending, fixing, lowering and tieying to shear connectors under water etc complete (Rate inclusive of GST and other prevailing taxes) | — | — | — | 4,77,015 | |
| — | 300.00 | — | — | ||
| Providing FRP composite scrificial shuttering, lowering it underwater, and applying it on face of pier under water at depths of upto 11 mtr from water surface including all necessary accessories, underwater divers, etc complete. (Providing and fixing in position leave insitu specially reinforced Matrix Annular form sheets made of 4mm thk pre fabricated composite panels 750mm to 1200 mm wide in frefixed spacers with inbuilt slide in groove joints at both ends for stitching the form elements together vertically along the periphery of the pier. The sheets are to be mounted on compatible lide in specially reinforced matrix A F Spacers (75mm size at 750 mm spacingbothways in plumb including underwater drilling, anchoring the same with anchors provided with system)including providing and fixing anchors on spacers to hold the sheet in position. Providing and placing external peripherial temporary tie bands spaced 0.75 to 1.2m vertically etc at required level below water. It should be of suitable dia as per site requirement and should form a 75 mm wide annular space for jacketing all around the periphery including lowering the system holding and fixing in position under water, necessary surface preprations, necessary under water divers, related equipments and accessoriesProviding and fixing in position over the prepared area a stay in situ composite polymer based surface applied Specially Reinforced Matrix Ring Form collar with embedded steel frame all around the periphery, etc as per drawing at required levels below water. It should be of suitable diametre as per site requirement and should form a 150 mm wide base collar all around the periphery for further jacketing works. Collar frame fixing to be done with M12 galvanised mechanincal anchors provided with the system as per its size including drilling and fixing of the same under water,The form provided should have inbuilt mechanical anchor points on edge frame and necessary inbuilt support frame. The work includes preparation of the area on external surface of well or pier underwater and lowering the system, holding and fixing in position including necessary surface preperation, necessary underwater divers, related equipments and accessories , oxygen for underwater works, boat charges, drilling of holes, fixing mechanincal anchors, fixing of composite collar form in place, etc (Rate inclusive of providing premoulder treaded inlets and local water tight chamber provision with rubber gasket arrangement for guniting at damaged locations as instructed by engineer incharge complete as per manufacturers recomendation. etc complete. | — | — | — | 38,94,000 | |
| — | 30.00 | — | — | ||
| Providing and laying in position high strength under water microconcrete / grout including mixing, transporting through tremie / pipe, lowering in water at required level, fixing to Specially Reinforced Matrix Patch / Annular ring Form, pouring and filling in form, including underwater divers, necessary accessories, couplers, valves, etc complete for void filling or jacketing of pier etc and as per the direction of Site-In-Charge. suitable product of FOSROC, SIKA, Krishna Conchem, Dimple Chemicals or BASF or equivalent as directed by the Engineering in charge etc. comlplete. | — | — | — | 18,09,720 | |
| — | 10.00 | — | — | ||
| Providing and fixing in position over the prepared cavity surface ,stay in situ Specially Reinforced Matrix Patch Cast composite polymer based surface applyed from with a two inch diametre prefixed inlet port to attach injection hose for filling underwater microconcrete, seal cap, air cum displacement water release plug,mechanical anchor sege frame with surface hugging seal, transparant concrete level monitering window, including ,lowering the form, divers, equipements,Driling of holes,fixing machanical anchors, fixing of patch cast form in place, as directed by the Engineering incharge etc complete. B)Each patch form unit of size 0.60 mtr x0.45 mtr | — | — | — | 1,38,160 | |
| — | 20.00 | — | — | ||
| Providing and fixing in position over the prepared cavity surface ,stay in situ Specially Reinforced Matrix Patch Cast composite polymer based surface applyed from with a two inch diametre prefixed inlet port to attach injection hose for filling underwater microconcrete, seal cap, air cum displacement water release plug,mechanical anchor sege frame with surface hugging seal, transparant concrete level monitering window, including ,lowering the form, divers, equipements,Driling of holes,fixing machanical anchors, fixing of patch cast form in place, as directed by the Engineering incharge etc complete. C)Each patch form unit of size 1.0 mtr x0.50 mtr | — | — | — | 3,10,640 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACSCORRECTION.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo8.pdf Correction Slip No 8 to GCC 2022
ATTACHMENT
GCCAdvanceCorrectionSlipNo10.pdf Correction Slip No 10 to GCC 2022
ATTACHMENT
Correction slip to GCC 2022
ATTACHMENT
ACS-4toGCC-2022.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo5.pdf Correction Slip No 5 to GCC 2022
ATTACHMENT
IRGCCApril2022.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo6.pdf Correction Slip No 6 to GCC 2022
ATTACHMENT
ACS-3toGCC-2022.pdf
ATTACHMENT
JPOforcablecut.pdf
ATTACHMENT
Proforma161718.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo9.pdf Correction Slip No 9 to GCC 2022
ATTACHMENT
GCCAdvanceCorrectionSlipNo7.pdf Correction Slip No 7 to GCC 2022
ATTACHMENT
damagedpiers_1.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
Drawings.pdf
ATTACHMENT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo5.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo6.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo9.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo7.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo10.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo8.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .