REPAIRS TO FLOORING WALL PLASTER CHAJJA STAIRS RUNGS PLINTH PROTECTION ETC AND POST CONSTRUCTION ATT IN CERTAIN MD AND OTM ACCN AT MH AND RH AREA UNDER GE MH AND RH KIRKEE

Amount

Taking down cement or cement lime plaster of any description all as specified and directed .

M & L for rendering of external surface 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finishsed even and fair (without using extra cement ) including uprooting/cutting of vegetation growth (maximum height upto three stories) using WPC @ 3% by weight of cement all as specified and directed (Note: WPC will be measured and paid seperately)

M & L for rendering of internal surfaces 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement ) all as specified and directed

Supply only intergral water proofing compound.

M & L for of preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over 3mm thick Birla wall care putty finished even and smooth , all as speciified and directed

M & L for preparation of new plastered surface and applying two coats of weather proof exterior paint (Apex Ultima or equivalent) over a coat of primer complete all as specified and directed

M & L for complete removal of existing finishes by scraping down old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts and applying 3mm thick, Birla putty and making smooth surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer all as specified and directed.

M & L for complete removal of existing finishes by scraping down old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts including filling of spots with POP , chalk whiting priming and applying two coats of white wash on old surfaces of walls all as specified and directed.

M & L preparation of old surfaces and applying of two coats of white wash on ceiling all as specified and directed.

M & L for applying one coat of weather proof exterior emulsion paint (Apex Ultima or equivalent) upto any height with approved colour and pattern on old surfaces including removing/ uprooting vegetation growths etc complete all as specified and directed.

M & L for complete removal of existing finishes, upto any height, by scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts and cutting/uprooting vegetations growth, including filling of spots with POP and applying of two coat of cement base paint over a coat of primer all as specified and directed.

M & L for providing water proofing plaster at the junction of wall and slab at chajjas , lintels, etc of average thickness 20mm in CM (1:3) with water proofing compound , finished even and smooth without using extra cement all as specified and directed. Note :- Rates shall deemed to be inclusive of Cost of water proofing compound & taking down exusting plaster if required.

M & L for rendering 10 mm thick on concrete surface in CM 1 :3 as in ceiling etc. all as specified and directed.

M & L for preparation of new plastered surface and for applying three coats of white wash on ceiling all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding/complete and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) all as specified and directed

Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar all as specified

M & L for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate ) masonary with solid blocks, exc , 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M & L for 75 mm thick, PCC 1:4:8 type D-2 (using 40mm graded stone aggregate)as in sub base, all as specified.

M & L for PCC 1:3:6 type C-2 , 75 mm thick as in plinth protection all as specified and directed

M & L for 40mm thick PCC type B-1 , 1:2:4 (20mm graded aggregate ) as in flooring all as specified and directed

M & L machine cut kota stone slab flooring 20-25mm thick in one piece as in treads of straircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over 20 mm thick screed bed or bedding in CM 1:4 for laying floor finishes, all as specified and directed.

All as item No 22 here in before but in one piece on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3 to receive kota stone/slab etc all as specified and directed.

Polishing of old existing Kota stone flooring i.e, cutting , grinding, joints pigment filling and polishing to get mirror finish all as specified and directed.

M & L for 25mm thick, levelling course of cement concrete type B-0 , 1:2:4 (12.5mm graded aggregate) as in flooring for laying tiles all as specified and directed.

M & L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

All as per item No 26, above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.

M & L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

M & L glazed ceramic tiles (350x250x7mm or 450x350x7mm) colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4, all as specified and directed.

M & L glazed ceramic tiles in vertical surface 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4, all as specified and directed.

S & F Vitrified ceramic coloured light shade tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed bed or bedding in layer in cement mortar 1 :6, all as directed.

All as per item No 31 above, but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.

Hacking out old broken glass, (any thickness, size , qulaity or description) metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one all specified and directed.

S & F sheet glass 3.0mm thick, ordinary quallity and glazing with oil putty in square n.exc 0.5 sq.m in each pane all as specified and directed.

All as per Item No 34 above but figured glass all as specified and directed

S & F 2mm thik Fibre glass reinforced translucent plain sheeting in windows at non-accessible location (Work shop Bldg) fixed to MS frame work with self tapping screws. (Note: The rate is deemed to be included for taking safety precautions & other arrangements, equipments etc to complete the work)

Taking up or down 20 mm bore steel tubing and connections and S&F 20mm bore tubes, medium grade, galvanised , with all fitting & fixed complete to walls & ceilings or laid in floors all as specified and directed

All as per item No 37, here-in-before but 15mm bore all as specified and directed.

S & F in repairs looking mirror with PVC frame and 5.50 mm thick glass of approved quality (size 0.60 x 0.45 m) all as specified and directed.

S & F in repairs 15mm dia, Bib taps, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable for 15 bore of pipe fixed all as specified and directed

S & F in repairs bib tap suitable for 15mm bore iron pipe , PTMT any colour, screwed for iron pipe and fixed (Min Wt-90 gms) all as specified

S & F in repairs of two way Bib cock 15mm dia , fancy type, chromium plated . Make :Jaguar Model No -CON-041KN 2 Way Bib Cock

S & F in repairs Wash basins oval type, vitreous China , size 480x 400 x 150mm all as specified and directed (Make : CERA Cat Part No S2020145)

S & F In repairs CP brass pillar taps single level for oval shape wash basin all as spesified and directed (make: CERA Cat No F1016101)

S & F in repairs vitreous china wash hand basin white size 550x450mm flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets cutting for pinning in ends of brackets of erecting stand but exclusive of fixing of supply and waste pipe all as specified and directed.

S & F in repairs angle stop valves suitables for 15mm bore iron pipe,fancy type, chromium plated all as specified and directed (Make : Jaguar or equivalent)

Cutting chases, pinning in brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth , all as specified and directed.

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. (Make : CERA, Hindware or Equivalent )

S & F in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts, all as specified and directed.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, all as specified and directed.

S & F in repairs 15mm dia pillar taps, CP brass, chromium plated with capstan heads chromiun plated screwed down high pressurewith hot &cold with long screwed shanks and fly nuts, all as specified and directed. (Make : Jaguar, CAT Part No con -011KN or equivalent)

S & F in repairs PVC ( SWR) bends any radius bore of 75 mm all as specified and directed.

All as per items No 52 here in before but 110mm bore etc all as specified and directed.

S & F in repairs PVC (SWR) pipes 75 mm dia single sockets, in any length rubber ring joints, laid in trenches or in floor all as specified and directed.

All as per items No 54, here in before but 110mm bore etc all as specified and directed.

S & F in repairs PVC (SWR) branch 75 mm bore piecs, single ( single Y ) equal or unequal all as specified and directed.

All as per items No 56 here in before but 110mm bore etc all as specified and directed.

S & F in repairs PVC (SWR) junction 75mm bore single ( single t) equal or unequal all as specified and directed.

All as per items No 58 here in before but 110mm bore etc all as specified and directed.

S & F in repairs tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated all as specified and directed.

S & F in repairs Health faucet brass chromium plated (ABS Body) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook fixing to 15 mm bore of pipe all as specified and directed.(Make - Jaguar Model No - ALD-CHR-573)

S & F in repairs 15mm Brass CP mixer tap for mixing " Hot or Cold" water screwed down for iron pipe all as directed (Make : Jaguar, CAT Part No FUS- 29273UPR)

S & F in repair grating square or rectangular 150mm size of PTMT (minimum weight 100 gms)all as specified and directed.

S & F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and directed. (Make : Prayag, Atul, Swastik or Equivalent )

S & F in repairs stainless steel kitchen sink coupling complete all as specified and directed

S & F in repairs PVC waste outlet pipe for kitchen sink complete all as specified and directed.

S & F in repairs PVC waste outlet pipe for 32/40mm dia WHB complete all as specified and directed

S & F in repairs PVC waste outlet pipe for Urinal complete all as specified and directed

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, seat cover complete , all as specified and directed.

S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including concrete complete including making good to floor all as spfd and directed.

S & F in repairs Plastic seat cover to EWC with aluminium hinging device all as specified and directed.

S & F in repairs cast Iron soil 100 mm bore , waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors

S&F in repairs PVC (SWR) Cast iron floor trap 100 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4 , all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete

Providing post construction anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron

Providing post construction anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors.

Providing post construction anti-termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors.

Providing post construction anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same

Dismantling wrought iron or mild steel work in rungs from wall and making good disturbed portion to match with existing surface.

S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Preparation of new surfaces of steel of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide all as specified and directed.

M/S SUGAM CONSTRUCTION

S.R.M.K Enterprises

L.K.R.TIWARI CONSTRUCTION

MAHESH DADAJI BACHHAV

M/S J J ENTERPRISES

VP DEVELOPERS AND CONTRACTOR