Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹82.3 LAccepted-AOC | L1 | Accepted-AOC QUOTED REASONABLE RATE | |
| 2 | L2₹1.2 Cr+₹35.6 L (43.2%)Rejected-Finance 200 NAVAGAM NAVAGAM TA SAYLA SURENDRA NAGAR GUJARAT 363430 | SURENDRANAGAR | GUJARAT | 363430 | L2 | Rejected-Finance QUOTED HIGH RATE |
Tender Value
₹1.1 Cr
EMD Value
₹1.8 L
Closing Date
27 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JAISALMER
AIRFORCE STATION JAISALMER RAJASTHAN
WORK SERVICES FOR IMPROVEMENT TO CERTAIN MD ACCN AT AIR FORCE STATION MOUNT ABU RAJASTHAN
2023_MES_633271_1
80280
Open Tender
Civil Works
Item Rate
300 days
AGE (I) (AF) MOUNT ABU
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹1,000
AGE (I) AF MOUNT ABU
₹1.8 L
Yes
20 Mar 2024
18 Dec 2023
29 Jan 2024
18 Dec 2023
27 Jan 2024
11 Jan 2024
Amount
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
Demolition of cement concrete (reinforced) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and cutting reinforcement as required to facilitate demolition complete all as specified and directed.
Taking down old APP membrane with plaster of existing water proofing treatment on roof surfaces etc. including removing debris out site of MD land complete all as specified and directed.
Cleaning roof slabs/chajjas by sweeping with brooms, removing all depositions/mud/ vegetations etc complete all as specified and directed.
M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing the rubish off the premises complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
Taking down of cement plaster or cement lime plaster of any description on PCC/stone surface/brick surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Excavating in post holes (or similar holes) in PCC/RCC/STONE each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
M&L for brick work built in cement mortar (1:6) using sub class 'B' old size bricks curved or straight in plan exc 6m mean radius complete all as specified and directed.
M&L for 75mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base , sub floors and flooring complete all as specified and directed.
M&L for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection including filling expansion joints with mixture of bitumin and sand in (1:1) complete all as specified and directed.
M&L for Reinforced cement concrete M-25 Grade Design Mix using of 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for Reinforced cement concrete M-25 Grade Design Mix using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for Reinforced cement concrete M-25 Grade Design Mix using 20 mm graded stone aggregate as in in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for Cement Concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in walls or retaining walls, any thickness, size or shape including pillasters, buttresses columns, pillars, boundry pillars and posts and mass concrete and thelike complete all as specified and directed.
M&L for 25mm thick Cement Concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in levelling course/padding, finished even and fair on roof/ chajjas etc complete all as specified and directed.
S&F 10mm dia and over mild steel TMT bars as in reinforcement cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends binding with MS wire annealed n.exc 0.9mm or with securing clips etc complete all as specified and directed.
S&F 6 to 8mm dia and over mild steel TMT bars as in reinforcement cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends binding with MS wire annealed n.exc 0.9mm or with securing clips etc complete all as specified and directed.
S&F mild steel work such as flat iron, round bars fixed independently as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165complete all as specified and directed.
S&F rolled mild steel in joist channel angle, tee sections, MS pipe, MS square tube ,bars , MS plate fixed in purlin rafter cleat, support etc incl welding, riveting etc conforming to Fe-410-W Gde E-250 quality-A complete all as specified and directed.
M&L for 10mm thick rendering cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls, surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering cement plaster in cement mortar (1:4) with water proofing compound on surfaces of fair faces of brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and directed. ( water proofing compound shall be measured and paid separately as supply only).
M&L for 5mm thick rendering cement plaster in cement mortar (1:3) on on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
M&L for 20-25mm thick machine cut Kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed of beding layer in cement plaster (1:4) complete complete all as specified and directed.
M&L for 20-25mm thick machine cut Kota stone slab in riser of steps, skirting, dado and pillar laid over cement screed and jointed including grinding and polishing over and including 15mm thick cement plaster in cement plaster (1:4) complete complete all as specified and directed.
M&L for 20mm thick Granite (of any type) tiles , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20mm thick screed of beding layer in cement plaster (1:4) complete complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete to match in floor over and including 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.
M&L coloured printed ceramic tiles area of each tile exceeding 0.18 but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete to match in floor over and including 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.
M&L for 300 x 450x7mm to 8mm thick digital design glazed ceramic tiles as in vertical surfaces of walls such as dados,skirtings , risers and the like ; set, jointed in neat cement slurry and pointed in white or coloured cement on over and including 10 mm thick cement plaster in cement sand mortar (1:4) , to match the same complete all as specified and directed.
M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed of beding layer in cement plaster (1:4) complete complete all as specified and directed.
S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
M&L for preparing new surfaces of roof/wall and applying two coats of Colour Polyurethene (PU) acrylic based Water proofing liquid compound over and including a coat of diluted elastomeric self primer with reinforcing fabric sheet as per manufacturer's instruction to stop leakage/seepage from roof/wall complete all as specified and directed. Note :- Unit rates quoted by the contractor shall be deemed to be included for work in buildings/ structure of any height.
M&L for carefully chipping, removing existing loose/ damaged concrete with plaster from Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items by low impact high frequency hammer/ chipper without damaging the existing sound concrete and exposing old reinforcement upto 10mm beyond corroded reinforcement bars using electrically operated diamond concrete saw blade, making the edges straight and even and cleaning it by wire brush and then by air blower complete all as specified and directed.
M&L for preparing Cleaning all existing reinforcement bars in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items with wire brush/rotary wire brush to make entire circumference surface of bars free from rust scales, loose material, dirt etc., complete and applying alkaline rust converting primer on the existing rebar and allowing it to react with rust for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer including cleaning the reinforcement, wire brushing to remove the rust spalls, complete as per manufacturer's instructions, complete all as specified and directed. Notes :- 1. Mode of measurement: per sqm of breaking area of concrete only. 2. Make: Sika- Rustoff 100/Fosroc- Reebaklens RR/ Pidilite Dr Fixit Rust Remover or equivalent make approved by E-in-Cs Br. 3. Unit rates qouted by the bidders shall be deemed to be includedf or work in buildings /structure at any height.
M&L for providing and application of Zinc rich epoxy anticorrosive protective coating for reinforcement bars as corrosion protection system in 2 coats to the entire circumference surface of bars (consumption Qty as per manufacturer's instructions but min 0.4 kg/Sqm approx) in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and directed by Engr-in-charge. The product should confirm carbonation resistance of 2 mm and bond strength > 1N/sqmm according to ASTM C 882-78 complete all as specified and as directed by Engineerin-charge. Notes :- 1. Mode of measurement: per sqm of breaking area of concrete only. 2. Make: Sika- Friazinc R/ Fosroc- Nitozinc Primer/ Pidilite Dr Fixit Zinc Rich Primer or equivalent make approved by E-in-Cs Br. 3. Unit rates qouted by the bidders shall be deemed to be includedf or work in buildings /structure at any height.
M&L for applying SBR based bonding agent to the entire concrete surface prior to building up of concrete with Polymer modified mortar or any other treatment, including cleaning the surface to remove dirt, dust or any other impurities on the surface, etc. complete in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and directed. Notes :- 1. Mode of measurement: per sqm of breaking area of concrete only. 2. Make: Sika - Sika Dur 32 LP/ Fosroc - Nitobond SBR (EP)/ Pidilite Dr Fixit Super Latex (EP) or equivalent make approved by E-in-Cs Br. 3. Unit rates qouted by the bidders shall be deemed to be included for work in buildings /structure at any height.
M&L for Drilling Holes of 12mm dia up to 100 mm deep holes in structural members at the interval of 300 mm in staggered manner or along the track line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatiblo with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying thixotropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc, complete all as specified and directed. Notes:-1. Make epoxy adhesive: Sika / Fosroc / Pidilite Dr Fixit) or equivalent make approved by E-in-Cs Br. 2. Unit rates qouted by the bidders shall be deemed to be included for work in buildings /structure at any height.
M&L for providing watertight form work to soffits of slab such as roof slab, Chajja, balcony slab and similar works (horizontal or sloping) by using of steel shuttering for rough finish surface including centering, shuttering, strutting and propping etc. complete all as specified and directed.
M&L for providing watertight form work to Sides & Soffits of roof beams, Lintel beam and similar works by using of steel shuttering for rough finish surface including centering, shuttering, strutting and propping etc. complete all as specified and directed.
M&L for providing watertight form work to Sides of columns and similar works by using of steel shuttering for rough finish surface including centering, shuttering, strutting and propping etc. complete all as specified and directed.
M&L for providing watertight form work to Sides and faces of Fins, Louvers, Fascia & drops and similar work by using of steel shuttering for rough finish surface including centering, shuttering, strutting and propping etc. complete all as specified and directed.
S&F 10mm dia and above additional corrosion resistant hot dip galvanised steel rebar Fo 500D or high grade as por required diameter in various structural elements such as columns, beams, and slabs etc. to replace the lost rebar section due to corrosion including cutting, bending and fixing the bar by installing new rebar with Epoxy Acrylate based anchoring adhesive complete all as spocified and directed. Make of anchoring adhesivo: Sika- AnchorFix -2+ Tropical/ Fosroc- Lokfix E75 or equivalent.
S&F 6mm to 8mm dia additional corrosion resistant hot dip galvanised steel rebar Fe 500D or high grade as per required diameter in various structural elements such as columns, beams, and slabs , Chajja slab projection etc. to replace the lost rebar section due to corrosion including cutting, bending and fixing the bar by installing new rebar with Epoxy Acrylate based anchoring adhesive complete all as specified and directed. Make of anchoring adhesive: Sika- AnchorFix -2+ Tropical/ Fosroc- Lokfix E75 or equivalent.
M&L for Arc Welding in repairs new TMT bars and shear connectors to existing bars not exc 2.5cm length and thickness of metal to be welded exc 9mm but n.exc 20mm complete all as specified and directed.
M&L for Rebuilding the section of damaged RCC elements to its original size in thickness upto 100mm by supply and casting with ready to use non shrink, cementitious free flow micro-concrete having compressive strength > 60 N/sqmm (28 days) according to ASTM C 1107-99, including mixing, placing and leveling the surface by grinding off cementitious slurry or cementitious joints differences if any and curing complete all as specified and directed. Notes:- 1.Mode of measurement: per KG of micro concrete. 2.Make: Sika- SikaRep Microcrete 4/ Fosroc- Renderoc RG/Pidilite Dr Fixit Micro concrete or equivalent make approved by E-in-Cs Br. 3. Unit rates qouted by the bidders shall be deemed to be includedf or work in buildings /structure at any height.
M&L for supply and grouting, injecting two part, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout having following properties:- (i) Mixed Density 1.1 kg/l (at +27°C); Viscosity 250 mPas at +30°C and should comply according to ASTM C 881, Type II and IV, Grade-1, Class E+F (ii) Compressive strength >= 70 N/sqmm (7 days) according to ASTM C 579; Tensile Strength 50 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); Tensile Modulus - 2000 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); (iii) Bond Strength - 10.8 N/sqmm (failure in concrete) after 14 days at +30°C cure; Flexural strength 50 N/sqmm according to ISO 178. (iv) Seal the nozzle with thixotropic epoxy adhesive after the refusal of grout material from the nozzle, Note:- leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost complete all as specified and directed. Notes :- Mode of measurement: per kg of material consumed. 2.Make: Sika - SikaDur 52 LP/ Fosroc- Conbextra EP 10/ Pidilite Dr Fixit Epoxy Injection Grout or equivalent. 3. Unit rates qouted by the bidders shall be deemed to be includedf or work in buildings /structure at any height.
M&L for Rebuilding the section of structural damaged RCC/PCC elements of Roof, Ceiling, Chajja, Fascia, Fins, Drops repair to spalling concrete to its original size and shape in layers of 10 mm average thickness in 1st layer by providing and applying with prebatched, one component fiber based repair mortar having compressive strength >= 50 N/sqmm (28 days) according to ASTM C 109; flexural strength >= 5N/ sqmm (7 days) according to ASTM C 293-79 complete all as specified and directed. Notes:- 1. Make: Sika - Monotop 122 F/R Fosroc - Renderoc S2/ Pidilite Dr Fixit Polymer Mortar HB or equivalent make approved by E-in-Cs. Br. 3. Unit rates qouted by the bidders shall be deemed to be included for work in buildings /structure at any height.
All as per item No. 51 here-in-before for each additional 10mm uniform thickness for subsequent layers.
M&L for temporary steel scaffolding and platforms consist of four vertical member connected longitudinally and transversly and has adjustable deck upto three storey building complete all as specified and directed.
M&L for preperation of new steel surfaces of any description, over 10cm in width or girth, not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for new surface of ceiling by scrapping and washing including preparation of surface by applying three coat of white washing all as specified and as directed.
M&L for preperation of new plastered surfaces of walls and distempering with two coats of Exterior Emulsion Weathet Proof paint with antifungal over a coat of primer complete all as specified and directed. (Note:- Work shall be got executed through Authorised applicator of the Manufacturer of the Paint and Guarantee of 5 years shall be furnished by the contractor towards weather proof painting on Stamp paper. Paint and primer shall of same manufacturer)
S&F in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed
M&L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in concrete bed for 110 mm dia PVC (SWR) pipes including packing under haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed
S&F 110mm dia PVC (SWR) junction single, equal or unequal complete all as specified and directed
S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed
S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed.
S&F in repair surface mounted square LED Panal aluminum die cast body with premium diffuser to ensure glare free & even distribution of light fitting 24 watt including twin core flexibler copper cable for connection of the light and connector where required Make Havells Model No LHEBHEP71Z1W0204 or equivalent of makes specified in the Appemdix "B" of Particular Specifications here-in-after, as approved by the AGE(I). .
ARTI CONSTRUCTION
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .