Construction of ICDS Center at Panchayat Office road in ward no 98 South Zone

Amount

Cleaning of Light Jungle as per the direction dept officers

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, | stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B

Cement Concrete Broken Stone in Cement mortar 1:4:8 mix using 40mm metal granite stone etc complete.,

Refilling with excavated sand complying with standard specification for filling in foundation and basement. (Filling the sand)

Supply and Filling with Well gravel including cost and conveyance of alll materials and all labour charges

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using, mild steel sheets of 90cm X 60cm and 10 gauge, stiffened with welded mild steel angle for boarding ‘supported by casurina props at suitable intervals etc completed complying with standard specification and as, directed. SI.No.122

Supply and erecting centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC slabs, Rectangular beems, Tee (or) ECC Beam, Lintel, Bed Block, Staircase waist and landing slabs landing beams, canopy etc., in all floor with all cross bracings using mild steel sheets o size 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25mm X 25 X 3mm for boarding laid over country wood joinsts of size 10cm X 6.50 cm spaced at about 90cm C/C and supports by Causrina props of 10cm to 13cm dia spaced at 75cm C/C etc., completed as directed. SI.No.123122

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half M Sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmenta officer etc., complete.

Supplying and fabricating and placing in postion MS o RTS Bar reinforcement to all RCC Works as per ths design given including cost of steel and bending wir also all floors

Fly ash Brick work in CM 1:5 (one cement & five sand) using size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

Plastering with cement mortar 1:3 mix (one cement and ‘three M Sand ) 12mm thick |

Plastering for brickwork and concrete surfaces using cement mortar 1:5 (One part of cement, five arts 0° sand by volume) thickness 12mm (average) for all internal/external surfaces like uperstructure, rainwater ducts, elevation

Plastering for brickwork and concrete surfaces Damp course in cement mortar 1:3 mix 20mm thick

Painting with plastic emulsion paint in two coats over a base coat of Primer in approved colour and quality etc., complete.

S/F of MS Truss with purlins including all labours and _ transports charges as per direction of departmental officers.,

POLYURETHANE FOAM THERMAL INSULATION PANELS (PUF)Providing and Fixing of polyurethane foam as External Wall Thermal insulation panels or Sandwich insulated panels with external 0.30mm total coated thickness pre painted galvalume sheet with micro ribbed profile, whereas internal 0.30mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be | chlorofluoro carbon and hydro chlorofluoro carbon free \ high performance rigid olyurethane foam (PUF) \conforming to IS 12436 having density not less than 40 + 2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessoriessuch as screws ,fastners sealants etc for fixing the panel etc., complete complying with standard specification.

Flooring finishing with first quality design ceramaic tiles of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/lm2_ including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Paving the floor with vitrified Floor Tiles of size 60 x 60 cm. of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60x60 cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc. complete complying with standard specification.

Daddoing the walls with first quality approved white glazed tiles of size 15OX150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/lm2 including finishing the ‘ointing and painting flush with tiles surface etc., complete - 10 m2

Supply and fixing of G.I. corrugated sheet (Galvanished Iron sheet 0.80mm tk) door using aroung "L" angle o size 25X25X6 mm and M.S.Flat 20 x 6mm including necessary locking arrangements, cost and conveyance etc.

Providing UPVC (Un-Plasticized Polyvinyl] Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness o 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of Imm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.

Supply and fixing of Cuddapah Slab 20 / 30mm Thick, as per the direction of departmental officer

Supplying and fixing in position best white glazed earthernware Oriya type Indian water closet o approved quality of size 550 mm x 440 mm with 'P' or 'S' trap and embedding the closet with trap to shape in position with 40mm _ brick jelly lime concrete 1:2:5 etc., complete

Conveyance of Surplus earth from work site to City outer with average lead of 15 km etc. complete as per direction of departmental officers

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC ins tat single core unsheathed copper conductor cable “a 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable Colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable o 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box inflush with wall with 3mm _ thick hylum sheet cover for 5A 3pin non interlocking flush type CS plug with painting of suitable colour with continuous earthwire connection of 14SWG TC wire for open plug point

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supplying fixing of position of indian make white glazed earthwere wash basin 35 0 mm x 550 mm x 400 mm with all accessories such as cost iron brackets, 32mm dia CPI waste coupling , rubber plyg and chain, 32mm dia B class GI Waste Pipe, 15 mm dia GM wheel valve , 15 mm dia Nylon Connection, 15 mm dia Brass Nipples , 15 mm CP Pillar tap etc

Supply and delivery and fixing of HDPE tank as per IS 12701/1996 including loading, unloading transportation and labour chares for fixing of the GI Pipes and specials for pipe connection works including cutting, treading and fixing charges etc.,

GAssociates (BID ID -1359352)