80889 Completion of incomplete work for repairs to certain roads, special repairs and addition/alteration of coat guard parade ground under GE Haddo, Port Blair

Amount

Material and labour for repairs to Pot Holes any depth, not exceeding 1.00 Sq.m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc., cutting around edges to at least 25mm depth, making good by applying tack coat with bituminous primer at 5 KG per 10 Sq.m, putting in premixed bitumen macadam, well rammed and sealed with binder 9.8 KG per 10 Sq.m blinded with 0.09 Cu.m of stone chippings of 6.3 mm size and again well rammed with power road roller of 8 to 12 ton capacity and consolidated including supply of premixed macadam, binder and chipping complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Preparing black top surfaces of existing road by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a Priming / Tack Coat with bituminous primer at 5 KG per 10 Sq.m using paving bitumen on Black top surfaces complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Bituminous Premixed Semi Dense Asphaltic Concrete, 40 mm consolidated thickness, using paving bitumen of Grade VG - 30, with 5.5% of binder content by weight of total mix using Hot Mix Plant and laid with Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified and as directed by the Engineer-in-Charge. Note: Minimum Bitumen content shall be 5.5% as specified here in above. Please note that if the actual quantity of bitumen to be incorporated on approval of Mix-Design is found more than the minimum bitumen content specified above, No price adjustment shall be made for actual bitumen content of Mix-Design.

Material and labour for providing 2.5mm thick road marking strips (Retro-reflective) of specified shade/ colour using hot thermoplastic material with fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surfaces including necessary T&P, cleaning the road surface off all dirt, scales, oil, grease and foreign materials etc. complete all as per manufacturer's instructions and as directed by the Engineer-in-Charge. [Make: STP/ Reliance Thermoplast]

Material and labour for bituminous premixed carpet from hot mix plant, using paving bitumen of grade VG-30, 40mm consolidated thickness, with 0.54 cu.m. of stone chipping mixed with 29.20 kg of binder, laid with mechanical paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for liquid seal coat applying evenly binder @ 9.8 kg per 10 sq.m blinding with 6.3mm size stone chippings @ 0.09 cu.m per 10 sq.m and rolled to a uniform smooth surface with power road roller of 8 to 12 ton capacity complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix Dual directional CAT's eyes with stem (road studs) of size 100mm x100mm x 26mm made out of ABS (Astronitrilite butadiene styrene) engineering plastic dynamically designed having high impact strength and fitted with 2 nos highly reflective reflectors panel of Amber, Red or white on both sides, approximately 113 gram weight (including stem) fixed with suitable adhesive conforming to relevent IS and all as per manufacturer's instructions complete all as specified and as directed by the Engineer-in-Charge. [Make: Protek/ Swareflex/ 3M / Dark Eye:model DA 51]

Supply and fix Solar road studs of size 125x125x25mm with shank of 65mm, Water proof, energy saving and eco friendly, reflective in two opposite directions, made out of aluminium alloy shell powered by solar cells and panels. Technical specifications : Aluminium alloy shell, solar panel-mono crystalline solar 2.4V / 0.3 Watts, one Ni-Mh or Ni- Cd rechargeable battery (1.2V/1600MA) & six super bright LEDs complete all as specified and as directed by the Engineer-in-Charge. [Make: 3M/Tata BP Solar/ Dark Eye:model DA 110(Dhruv)]

Demolition of cement concrete in ground floors and paving not exceeding 15cm below or above ground level.

Material and labour for 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded aggregate sub base to flooring.

Demolition of precast concrete block walling built in cement mortar of any description walls complete.

Material and labour for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, using grey cement, set, jointed in neat cement slurry in floors and pointed with white cement and pigment to matching with coloured cement in floor over 20 mm thick screed in CM 1:4 all as specified and directed.

Material and labour for precast cement concrete block masonry with solid blocks, type PCC (1:3:6) C1 (using 20mm graded stone aggregate), exc. 10cm in width, setting in centre mortor (1:6) all as specified.

Material and labour for rendering 10mm thick on concrete/block masonry surfaces in CM (1:4) and finished fair and even all as specified.

Material and labour for providing cement concrete type B-1 (1:2:4) using 20 mm graded crushed stone aggregate in cills, coping, bed blocks, bed etc.

Material and labour for preparation of newly plastered surfaces and applying two coats of cement paint complete all as specified and directed.

M/s Kanaka Agencies

SWASTHIK ENGINEERING WORKS