Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹19.0 L+₹2.3 L (13.5%)Rejected-Finance HOSUE NO 44 MASTER COLONY SATROD KHAS HISAR HARYANA 125044 | HISAR | HISAR | HARYANA | 125044 | L2 | Rejected-Finance L2 | |
| 3 | L3₹19.3 L+₹2.5 L (15.1%)Rejected-Finance 1252 SECTOR 15 PANCHKULA 134113 | PANCHKULA | HARYANA | 134113 | L3 | Rejected-Finance L3 | |
| 4 | L4₹19.8 L+₹3.1 L (18.4%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹19.9 L+₹3.1 L (18.7%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹28.4 L
EMD Value
₹56,700
Closing Date
10 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-96/2023-2024 ADDN ALTN TO OR MD ACCN BLDG NO 3005 TO 3014 AT SECTOR E AT CHANDIMANDIR
2024_MES_637027_1
GE/CHM-96/2023-204
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹56,700
Yes
12 Mar 2024
13 Jan 2024
13 Feb 2024
13 Jan 2024
10 Feb 2024
27 Jan 2024
Amount
Dismantling floor hearth or wall tilling including cement mortar bedding, complete as specified and directed.
Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed.
Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed.
Glazed ceramic coloured tiles of size 350mmx450mmx7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Baroda green marble 14 to 16mm thick, machine cut, laid over and including 10mm thick screed bed in cement mortar (1:4), bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting and machine polishing (table rubbed and polished), as in kitchen platform, step, jambs, pillars and like, complete all as specified and directed.
Machine cut kota stone slab on horizontal surface like floors, tread of stairs etc, 18-20mm thick , best quality, width and length as ordered over and including 15mm thick screed bed in cement mortar( 1:4), bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting and machine polishing, complete all as specified and directed. Note: In case of stair case single piece stone shall be fixed, size as per site.
Making holes into or through concrete slabs/ stone slabs 150 mm long for 25mm dia pipe as in cooking plateform, incl making good the surface complete all as specified and directed.
Demolition of reinforced cement concrete in roofs, floors, beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.
Reinforced cement concrete type B-1, 1:2:4 (nominal mix, using 12.5mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Taking down chowkats or frame n. exc. 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkats or frame exc. 1.5 sqm and n exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed.
Taking down shutters of any description exceeding 1Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in same opening(s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed.
Factory made pressed steel frames having profile 125mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. complete ,all as specified and directed.
Factory made pressed steel frames having profile 105mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. complete, all as specified & directed.
35mm thick flush shutters, solid core costruction, with block board core and plywood face panels, commercial type on both sides as in cupboards, etc. complete all as specified and directed.
35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to received gauge/ glass etc, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc complete all as specified and directed.
Solid PVC frame having profile 75mm x 50mm , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density not less than750Kg/ cum, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws , complete all as specified and directed.
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
Factory made solid PVC board 20-22 mm thick as in cup board shelf/ door, sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free, complete all as specified and directed.
Factory made solid PVC board 18-19 mm thick as in kitchen cabinet/ cupboard panell, shutter with 19mm wide PVC leeping pasted at exposed sides , sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free complet,e all as specified and directed.
100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed.
100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed for PVC door, type C-21 complete all as specified and directed.
100mm hasp and staple,aluminium anodised, wire type, including bolt to hinge plate and fixed with screws, complete all as specified and directed.
200 mm size aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed.
150 mm size aluminium, barrel tower bolt of extruded section and fixed for PVC door complete all as specified and directed.
150 mm aluminium handles cast type complete all as specified and directed.
250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed.
300mm MS ordinary rat tail rod pattern spring incl roller plate complete all as specified and directed.
Continuous (Piano) hinges of size 30mm (width of flap when open) , mild steel , fixed in repairs, complete all as specified and directed.
Factory made steel window box type with side hung shutters including box type hinges and one shop coat of red oxide primer, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete with glazing bars, dovetailed or welded fixed with and including MS flat of suitable size for fixing grills and guards bars etc as in repairs, complete all as specified.
Factory made steel window box type with side hung shutters including box type hinges and one shop coat of red oxide primer, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete without glazing bars, dovetailed or welded fixed as in repairs, complete all as specified.
Factory made box type steel ventilators, openable with side hung shutters with box type hinges including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded, fixed in repairs, complete all as specified and directed.
Galvanised mild steel wire cloth 0.56 mm nominal dia of wire & avg width of aperture 1.18 mm in fixed with tinned tacks complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden, metel frames including punching or drilling out glazing pins/spring clips complete all as specified and directed.
4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Framed work such as grill guard bars etc welded to steel frame MS round/square bar conforming to Fe 290 Gde-E 165 complete all as specified and directed.
Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide, zinc chrome complete all as specified and directed.
Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.
Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed.
All as per item No 46 hereinbefore but execpt brick
Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed.
Dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in CM 1:4 complete all as specified and directed.
Rendering 5mm thick in CM 1:3 on fair faces of concrete/brick surfaces as in ceiling, chajja, etc. finished fair and smooth complete all as specified and directed.
Rendering 15mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Rendering 15mm thick in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed.
Three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed
Two coats of exterior weather proof acrylic emulsion paint over a coat of priming paint including preparation of new wall surfaces complete all as specified and directed.
Three coat of white wash on ceiling surfaces including preparation of old surfaces complete all as specified and directed.
Preparation of old surfaces of walls and applying two coats of oil bound distemper, complete all as specified and directed
Two coat of white wash on wall surfaces including preparation of old surfaces complete all as specified and directed.
Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed.
Plain cement concrete 1:5:10 type E-2 using 40mm graded brick coarse aggregate as in sunken floor filling and mass concrete complete all as specified & directed.
Water proofing treatment to sunken portion and adjoining walls of kitchen, WC, Bath & Toilet, etc complete all as specified as under:- (a) 15 mm plaster in cement mortar (1:3) mixed with water proofing compound as per manufacturer’s instructions after roughning and cleaning the surface . (b) Curing the sunken portion with water minimum for 48 hours by ponding. (c)Applying 3mm thick APP membranne with bitumen by torch application to the treated sunken surface over a coat of primer as per manufacturers instructions. (d) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound .
Cast iron nahani traps 100mm dia with grating including jointing to waste pipe with run led jointed and setting/fixed in cement concrete type B-1 1:2:4 fixed as in repair complete all as specified and directed.
Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with CP mixer, waste coupling, angle brackets, PVC connection 15mm size, 450mm long, PVC waste pipe, fixed as in repair complete all as specified and directed.
PTMT 100mm dia bore traps 'P' or 'S' complete all as specified and directed.
Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement fixed in repair complete all as specified and directed.
Vitreous china, wash down water closet pan, superior white, Pedestal pattern WC with PTMT ‘P’ or ‘S’ trap, seat cover (excluding, flushing cistern and flush pipe), fixed as in repair complete all as specified and directed.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
PVC connections 15 mm size with PTMT nuts of length 450 mm, fixed as in repair complete all as specified and directed.
Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed.
Towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, fixed as in repairs, complete all as specified and directed.
Grating doom 100mm dia of PTMT, fixed to floor trap with cement mortar 1:3, fixed as in repairs, complete all as specified and directed.
Plate rack of stainless steel sheet 1.0mm thick of size 600mmx 600mm with steel shelves and hanging arrangements for utensil, fixed as in repairs, complete all as specified and directed.
Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm x 203mm, with bowl of size 405mm x 354mm x 203mm incl fixing cantilever brackets, fixed as in repairs, complete all as specified and directed.
Taking up or down steel tubing and connections 15mm bore, complete all as specified and directed.
Taking up or down steel tubing and connections 20mm bore ,complete all as specified and directed.
15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed.
Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning ,complete all as specified and directed.
20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.
Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning, complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed.
Bib taps brass, fancy type, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, fixed as in repairs complete all as specified and directed.
Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed
Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repairs, complete all as specified and directed
25mm dia stainless steel curtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed.
PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed.
110 mm bore PVC (SWR) bends of any radius complete, all as specified and directed.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) and removal of any existing treatment , complete all as specified & directed.
Plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in roof padding, roof kerbs of mud stops, rounded or chamfered on edges usingincluding necessary form work, complete all as specified and directed.
3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying two coats of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.
40mm thick brick tiles over and including 20mm thick Cement mortar 1:4 joints, grouted & pointed flush as the work proceeds mixed with crude oil 5% by wt of cement complete all as specified and directed.
All as per item No 96 here-in-before but except tiles.
Supply only water proofing compound, ISI marked complete all as specified and directed.
Dismantling wrought iron or mild steel as in gates, grills, posts etc or in any description not otherwise provided for, complete all as specified and directed
Pre-painted galvalume aluminium zinc coating (AZ 70) GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.
Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.290.Gde-E-165, complete all as specified.
Float valve/ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe (minimum weight 210 gms), fixed as in repairs, complete all as specified and directed.
500 Litres capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) double layered hoisted and fixed in position including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed.
m/s AR Construction co
K.L. KATARIA AND SONS
VRIDHI ENTERPRISES
KUNDRA CONSTRUCTIONS
M/S Dashmesh Enterprises
Standard Const. Co.
M/s Super Trading Corporation
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .