PROVN OF MOBILE DG SET ALONGWITH ASSOCIATED WORKS AT 8FBSU

Supply, installation, testing and commissioning of silent Diesel Engine Generating set comprising of diesel engine liquid cooled (latest CPCB - IV+ norms compliance) and alternator of capacity not less than 160 KVA, 3 phase, 415 volt, 50 HZ, 0.8 power factor at 1500 RPM, both coupled and aligned on a common base frame complete with standard accessories like MS fuel tank AVM pads fitted on common base frame Control panel and outdoor type AMF panel mounted on common trolley (DG + AMF) with digital measurement devices, along with acoustic enclosures conforming to latest IS 10002, ISO - 3046, BS 5514 and complete in all respects including lubricant oil filled in engine, DG Set Manual and cold start kit suitable for(-15 degree celsius ) temperature. Make Engine:- Tata/Greaves/cummins/kirloskar Make Alternator:-Stamford/Kirloskar/Crompton. PRIME MOVER:- Prime mover suitable for driving alternator 160 KVA capacity having suitable BHP at 1500 RPM for rated output for alternator in accordance with latest BE/IS specifications with electric starting device with all standard fittings and 02 Nos batteries of 12 volt and of suitable AH or equivalent with battery charger built in AMF panel and with one set of connecting leads of suitable size copper cable. Engine over speed safety mechanism shall be incorporated.The DG Set should also comprise remote monitoring system for tracking genset health,operation parameters,genset utilisation and live performance tracking. The Engine shall be equipped ENGINE INSTRUMENT AMF PANEL:- All relevant parameters shall be conventionally displayed on complete panel thereby providing easy monitoring of lubricating oil pressure, coolant temperature, battery charging ammeter, RPM, Hour meter and starting switch etc. The auto start and auto stop panel consisting of line voltage monitoring 24 volts 12 amps battery charger. FUEL TANK:- Suitable capacity with inlet and outlet arrangement, air vent and drain plug arrangement. Note:The OEM shall be responsible for carrying out routine preventive maintenance and scheduled servicing of the equipment for a period of 02 (Two ) years from the date of commissioning.The scope of maintenance shall include all consumables and spare parts required during routine/scheduled servicing.The Contractor has to quote the rates of DG set after considering the service charges for the said period.Accordingly,the cost of the DG Set,including the required spare parts,consumables and service charges is deemed to be included in the contract rates.

Supply, installation, testing and commissioning of silent Diesel Engine Generating set comprising of diesel engine liquid cooled (latest CPCB - IV+ norms compliance) and alternator of capacity not less than 250 KVA, 3 phase, 415 volt, 50 HZ, 0.8 power factor at 1500 RPM, both coupled and aligned on a common base frame complete with standard accessories like MS fuel tank AVM pads fitted on common base frame Control panel and outdoor type AMF panel mounted on common trolley (DG + AMF) with digital measurement devices, along with acoustic enclosures conforming to latest IS 10002, ISO - 3046, BS 5514 and complete in all respects including lubricant oil filled in engine, DG Set Manual and cold start kit suitable for(-15 degree celsius ) temperature. Make Engine:- Tata/Greaves/cummins/Kirloskar Make Alternator:-Stamford/Kirloskar/Crompton. PRIME MOVER:- Prime mover suitable for driving alternator 250 KVA capacity having suitable BHP at 1500 RPM for rated output for alternator in accordance with latest BE/IS specifications with electric starting device with all standard fittings and 02 Nos batteries of 12 volt and suitable AH or equivalent with battery charger built in AMF panel. and with one set of connecting leads of suitable size copper cable. Engine over speed safety mechanism shall be incorporated.The DG Set should also comprise remote monitoring system for tracking genset health,operation parameters,genset utilisation and live performance tracking. The Engine shall be equipped ENGINE INSTRUMENT AMF PANEL:- All relevant parameters shall be conventionally displayed on complete panel thereby providing easy monitoring of lubricating oil pressure, coolant temperature, battery charging ammeter, RPM, Hour meter and starting switch etc. The auto start and auto stop panel consisting of line voltage monitoring 24 volts 12 amps battery charger. FUEL TANK:- Suitable capacity with inlet and outlet arrangement, air vent and drain plug arrangement. Note:The OEM shall be responsible for carrying out routine preventive maintenance and scheduled servicing of the equipment for a period of 02 (Two ) years from the date of commissioning.The scope of maintenance shall include all consumables and spare parts required during routine/scheduled servicing.The contractor has to quote the rates of DG set after considering the service charges for the said period.Accordingly,the cost of the DG Set,including the required spare parts,consumables and service charges is deemed to be included in the contract rates.

M&L and fabrication of trolley to accomodate 160 KVA DG Set with having sufficient space all around the DG Set comprising of 04 wheel of size 7.50x16 ,toeing hook,triangular draw bar detachable type made of MS Channel 100x50 mm,,spring loaded steel towing hook of 36mm around turn table made of heavy duty thick plate with ball bearing,manual locking brake system with suitable leaf spring,manual slid and landing jack with pin lock fitted on all four corners complete with spray painting having carrying capacity 05 to 06 ton for mounting 160 KVA DG Set .Trolley should comprise of 04 Nos of Earthin g spike with 2.5 sqmm copper cable of length 10 metre each along with hammer and hand operated drum for holding cable all as specified and directed by Engineer-in-charge. Note:- 1. The trolley should be such designed that there is sufficient space all around and openable from all three sides with proper locking arrangement and open & shut provision and trolley can be moved to and fro in any direction. 2. The trolly of DG Set shall be approved by GE before fabrication.

M&L and fabrication of trolley to accomodate 250 KVA DG Set with having sufficient space all around the DG Set comprising of 04 wheel of size 7.50x16 ,toeing hook,triangular draw bar detachable type made of MS Channel 100x50 mm,,spring loaded steel towing hook of 36mm around turn table made of heavy duty thick plate with ball bearing,manual locking brake system with suitable leaf spring,manual slid and landing jack with pin lock fitted on all four corners complete with spray painting having carrying capacity 05 to 06 ton for mounting 250 KVA DG Set .Trolley should comprise of 04 Nos of Earthin g spike with 2.5 sqmm copper cable of length 10 metre each along with hammer and hand operated drum for holding cable all as specified and directed by Engineer-in-charge. Note:- 1. The trolley should be such designed that there is proper space for holding LT Cable and trolley can be moved to and fro in any direction. 2. The trolly of DG Set shall be approved by GE before fabrication.

Supply, lay, connect test and commissioning of LT cable XLPE insulated screened PVC tape inner sheathed, armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional area of 150 Sqmm 3.5 Core confirming to IS:7098 Part-I laid in cable drum mounted on trolley complete including lugs all as directed.

Supply, laying and commissioning of LT cable XLPE insulated screened PVC tape inner sheathed, armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional area of 300 Sqmm 3.5 Core confirming to IS:7098 Part-I laid in cable drum mounted on trolley complete including lugs all as directed.

Supply, installation, testing & commisioning in replacement of factory made (CPRI test certified manufacturer) LT feeder pillar box of suitable, outdoor type, floor mounted, double door, cubical compartmentalized type suitable for 415 volts, 3 phase, 4 wire, 50 Hz supply system all as specified and directed having busbar chamber with insulated aluminium busbar 350 Amps rating (100% neutral) installed on porcelain insulators. The panel shall be dust and vermin proof made of 3 mm (outer) & 2 mm (inner compartment door) CRCA sheet duly powder coated, panel mounted on angle iron 40x40x6 mm frame having 4 Nos legs 45 cm long of 40x40x6 mm angle iron, 15 cm grouted in PCC of ratio 1:2:4 and 30 cm clear space front ground level. Front & back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC insulated multistranded copper conductor cables of suitable size, thimbling and cable entry boxes with cable glands all as specified and directed by Engineer-in-charge. The scope of the work also includes supply and fixing the following:- (a) MCCB 250 Amps,36 kA rupturing capacity,4 pole, 415 volts, 50 Hz, Adjustable thermal Fixed magnetic release type - 01 No. (b )Digital Multifunctional meter showing V, A, PF, etc =01Nos (c) Indicating lamp LED (RYB)- 01 set of three