REPAIR/ REPLACEMENT OF UG CABLE, LED LIGHT FITTINGS AND OTHER MISC E/M WORKS AT CERTAIN UNIT AREA UNDER GE KAMPTEE

Amount

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 4 above but One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 4 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 4 above but One 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 4 above but One bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 4 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the size 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm complete all as specified and directed. Note:- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

All as per item No 10 above but 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed.

All as per item No 10 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specified and directed.

All as per item No 10 above but 4x 6.0 Sqmm with earth wire of 2x6.0 Sqmm complete all as specified and directed.

All as per item No 10 above but 4x 10.0 Sqmm with earth wire of 2x10.0 Sqmm complete all as specified and directed.

S&F ceiling rose surface type 2/3 terminal 5 amps complete all as specified and directed.

S&F Bell ding dong, AC 230 volts, single phase complete all as specified and directed.

S&F lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

S&F Modular switch one way 6A, 1 module complete all as specified and directed.

S&F Modular switch one way 16A, 1 module complete all as specified and directed.

S&F Modular bell push 6A, 1 module complete all as specified and directed.

S&F Modular Socket 6A, 2/3 pin combined, 2 module complete all as specified and directed.

S&F Modular Socket 6A/ 16A, 2/3 pin combined, 2 module complete all as specified and directed.

S&F Modular Fan step regulator, 120 watt, 2 module complete all as specified and directed.

Taking down and refixing 18/20 watts LED batten/ surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed.

S&F 20W / 22W LED polycarbonate batten having system lumens > 2000 lumens & made up of Co-extruded Thermally conductive plastic material & High Optically efficient plastic diffuser, input woking range 120Vac to 270Vac, CCT 5700 +/-300K, CRI > 75, THD < 20%, PF > 0.9, IP20, 2 Nos. clamps provided for mounting in false ceiling with screw complete all as specified and directed. Make:- Cat No LGLZPCX022xC of Jaquar or equivalent in Wipro, Philips, Bajaj.

S&F sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure vertical triple pole & neutral(VTPN) with MCCB 63 amps for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB single pole and neutral 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F MCB triple pole and neutral 415 volt 40 to 60 amps 10 KA complete all as specified and directed.

M&L for earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

Disconnect and insulate electric supply wire and taking down carefully ceiling/ exhaust/ cabin/ wall fans of any make and sweep dismantling blades, check for repairs required complete all as specified and directed. Note : Repairs/ Replacement of spares shall be carried out under appropriate items.

Hanging only ceiling fans of any make and sweep connecting the complete with & including provision of copper conductor cord 3 core PVC insulated and sheathed from ceiling rose to fan connector , painting with spray paint and testing Making of MES No complete all as specified and directed. Note: The fan shall be fitted with new set of clamps rubber shackle split pins and top and bottom nut bolts etc.

Hanging only exhaust/ cabin/ wall fans of make and sweep connecting lug complete with and including provision of copper conductor cord three core PVC insulated and sheathed from ceiling rose to fan connector & testing, making of MES No complete all as specified and directed. Note: The fan shall be fitted with new set of washers nuts rubber packing etc.

Opening up of fan motor of ceiling/ exhaust/ wall/ cabin fans cleaning starter rotor, cleaning of all parts greasing oiling of bush and bearing re-assembling and testing for smooth functioning complete all as specified and directed.

M&L for taking down burnt/ damaged winding, cleaning stator and rotor including slots etc, rewinding with suitable gauge of super enameled copper insulated wire for ceiling fan 1200 mm sweep complete all as specified and directed.

All as per item No 38 above but exhaust fan 230 mm sweep complete all as specified and directed.

All as per item No 38 above but exhaust fan 300 mm sweep complete all as specified and directed.

All as per item No 38 above but exhaust fan 450 mm sweep complete all as specified and directed.

S&F bearing in replacement for Ceiling fan 1200mm sweep complete all as specified and directed.

S&F bearing in replacement for exhaust fan 230 mm sweep complete all as specified and directed.

S&F bearing in replacement for exhaust fan 300 mm sweep complete all as specified and directed.

S&F bearing in replacement for exhaust fan 450mm sweep complete all as specified and directed.

S&F gun metal bush for ceiling fan 1200mm sweep complete all as specified and directed.

S&F in replacement of condenser AC 230 Volt 2.5 MFD complete all as specified and directed.

S&F in replacement of condenser AC 230 Volt 4.0 MFD complete all as specified and directed.

S&F ceiling fan blades 1200mm sweep complete with nuts and bolts as per sample (set of three) complete all as specified and directed.

M&L for shaft work of ceiling fan of any make and sweep complete including filling metal and lathe machining complete all as specified and directed.

M&L for down rod for ceiling fan of any make and sweep made out of medium grade GI tubing 15mm dia duly painted with two coats of enamel paint and provision of holes for electric wire at top and bottom also arrangement for fitment of ceiling fans complete all as specified and directed.

M&L for MS work such as fan hook angle / FI clamp, MS pipe nuts, bolts, washers welding, bending cold or hot drilling holes for bolts in any shape and size etc including two coats of synthetic enamel paint cover a coat of red oxide primer complete all as specified and directed.

M&L for earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases as required 25x4 mm galvanised strip complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables, poles, stay and getting out of excavated material complete all as specified and directed.

Excavation in trenches in any type of hard/dense soil/hard standing not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables, poles, stay and getting out of excavated material complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested complete all as specified and directed.

Removal of surplus soil to a distance not exc. 50m and deposited where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 50mm outer diameter and 38mm inner diameter with IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 63mm outer diameter and 51mm inner diameter with IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

Taking down unsv Battery from VCB Panel and S&F new Battery 100 AH at 10 Hour rate complete all as specified and directed. Make: EXIDE/ AMARON/ TATA

Taking down the unserviceable LT cable of any size from tranches/ walls /floor etc complete all as specified and as directed. Note:- laying of cable route is same as old cable route.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 120 sq mm, 3.5 core including testing after laid and jointed complete all as specified and directed. Note:- Excavation and earth work, cable protection shall be measured and paid separetely.

All as per item No. 62 but cable size 95 sq mm 3.5 core complete all as specified and directed.

All as per item No. 62 but cable size 35 sq mm 3.5 core complete all as specified and directed.

All as per item No. 62 but cable size 16 sq mm 4 core complete all as specified and directed.

S&F Heat shrinkable straight through cable jointing kit for 1100 Volts grade cable joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 150 to 185 Sq mm complete all as specified and directed. Note:- Any Excavation and earth work, returning and filling, removing involved shall be measured and paid separately.

All as per item No. 66 but cable size 70 - 120 sq mm cable size complete all as specified and directed.

All as per item No. 66 but cable size 25 - 50 sq mm cable size complete all as specified and directed.

S&F in repairs thermoplastic cable entry junction boxes of size 250 x 220 x 135mm and IP-65 protection level with metric knock out fixed on poles with MS clamps, nuts, bolts and washers including MCB SPN, 5-32 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc., separate (detachable) gland plate, bakelite connector 4 way 20 amp, dust and vermin proof, front door opening with hinges and locking arrangement, complete all as specified and as directed. Make:- Sintex/ Hensel or equivalent

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.53,625.00]

Paragon Electrotechnics

Chinmaya Enteprises

Sharma Electrical and Services

M/S. ELECTROPOWER TECHNOLOGIES

Asha Enterprises

chronicle enterprises

Bidder Name

Sharma Electrical and Services

Paragon Electrotechnics

Chinmaya Enteprises

Vaidehi E Link

chronicle enterprises

Asha Enterprises

M/S. ELECTROPOWER TECHNOLOGIES