PROVN OF GEYSER FOR ARMY AVN SQN SPECIAL REPAIR REPLACEMENT OF T5 HPSV FITTINGS POST TOP LANTERNS HIGH MAST LIGHT WITH ENERGY SAVING LED FITTINGS AT VARIOUS UNITS AND SPECIAL REPAIR REPLACEMENT OF LIGHTENING PROTECTION SYSTEM AND CONNECTED ITEMS

Amount

PROVN OF GEYSER FOR ARMY AVN SQN

M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable size for accommodating Switches, Sockets, etc. Earth Continuity Wire connected to Common Earth dolly, complete all as specified and as directed.

M&L Sub-main Wiring with 2-Runs of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc., complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cables & 1-Run of PVC Casing Capping shall deem to be include in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Conduit only. Wires required for looping, etc. as ordered will deem to be include in the Quoted Unit Rate.

S&F Switch Piano 16 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Socket Outlet 6/16 Amp, 3 Pin (Multi Pin), Flush type, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F MCB Single Pole & Neutral 6 Amp to 32 Amp, 'C' Series, 50 Hz, 10 kA, 240 Volt and connecting up, complete all as specified and as directed.

S&F MCB Distribution Board Sheet Metal Enclosure 2-way, SPN, 240 Volt AC, Factory Made, Single Door, Front Openable, fixed Flush with Wall Inside the Nitches or Outside on Wall Surface and connecting up, complete all as specified and as directed. MAKE : HAVELLS/ LEGRAND/ L&T/ SCHNEIDER (as approved by GE)

Supply and Laying or Fixing or Passing through Pipe, 1100 Volts grade, Heavy duty Cable with PVC insulated Aluminium Stranded Conductor, served with an inner Sheathing of PVC Tape Armoured with Galvanised Steel Wire or Tape and Overall PVC Sheathed, Nominal Cross sectional area 10 Sqmm, 2 Core suitable for Service Connections, complete all as specified and as directed.

Supply & Installation Water Heater (Geyser) Storage type of 25 LITRE Capacity, BEE 5 Star rated, fixing to Walls, etc., and Providing necessary Connections and Testing, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size and 450mm in length with PTMT Nuts suitable for Hot & Cold Water, complete all as specified and as directed.

S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Plug type Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and as directed.

S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.

SPECIAL REPAIR/ REPLACEMENT OF T-5 HPSV FITTINGS/POST TOP LANTERNS/ HIGH MAST LIGHT

Tacking down existing Old/ Unserviceable Security / Street Light Fitting/ Flood Lights/ Post Top Lantern of any description, Type and Size, complete all as specified and as directed.

S&F LED POST TOP Fitting 25 Watt, New Generation Energy Saving and Enviromental Friendly, Long Life, connected with and including New PVC Copper Flexible Tiwisted Wire, 3 Core from Pole to Light Fitting, complete all as specified and as directed. MAKE : HAVELLS, Model : RUBYPT25WLED757PSYMTOPC or equivalent Model in Make : BAJAJ/ CG/ PHILIPS (as approved by GE)

S&F LED Street Light Fitting 48 Watt, New Generation Energy Saving and Enviromental Friendly, Long Life, connected with and including New PVC Copper Flexible Tiwisted Wire, 3 Core from Pole to Light Fitting, complete all as specified and as directed. MAKE : HAVELLS, Model : ENDURACITYLINERNXGENSL48WLED757PASYB-OPC or equivalent Model in Make : BAJAJ/ CG/ PHILIPS (as approved by GE)

S&F LED Street Light Fitting 70 Watt, New Generation Energy Saving and Enviromental Friendly, Long Life, connected with and including New PVC Copper Flexible Tiwisted Wire, 3 Core from Pole to Light Fitting, complete all as specified and as directed. MAKE : HAVELLS, Model : ENDURAPEARLPLUSSL70WLED757PASYYTOPC or equivalent Model in Make : BAJAJ/ CG/ PHILIPS (as approved by GE)

S&F LED Flood Light Fitting 1x120 Watt suitable for High Mast Light, connected with and including New PVC Copper Flexible Tiwisted Wire, 3 Core, complete all as specified and as directed. MAKE : HAVELLS, Model : JETAPROPLUSFL120WLED757LTG or equivalent Model in Make : BAJAJ/ CG/ PHILIPS (as approved by GE)

SPECIAL REPAIR/ REPLACEMENT OF LIGHTENING PROTECTION SYSTEM & CONNECTED ITEMS

S&F Air Termination Single Pointed Aluminium Rod 12mm dia and 300mm long with Arrester Clamp 12mm made out of Brass/ Gun Metal including provision of necessary Fixing Arrangement at Roof and jointing by Exothermic Welding or Brazing including Taking down Old/ Unserviceable Air Termination of any description, complete all as specified and as directed.

S&F Aluminium Strip 25x3.15mm with Saddles (Hydroscopic Insulator) and fixing Screws for Roof/ Earth Conductors and Down Conductors above Ground, Pole Top to Test Point including Taking down Old/ Unserviceable Aluminium Strip of any description, complete all as specified and as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.

S&F Galvanised Iron Strip 32x6mm with Saddles and fixing Screws for Roof/ Earth Conductors and Down Conductors in Ground including Taking down Old/ Unserviceable GI Strip of any description, complete all as specified and as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.

S&F Test Point Terminal Block made of Gun Metal or Phosphorus Bronze size 75x75x25mm, drilled and screwed including 3 No. 8mm dia, 25mm long Hexagonal Head Screws including Taking down Old/ Unserviceable Test Point Terminal Block of any description, complete all as per specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.3mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Galvanised Earth Strip of size 32x6.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including Taking down Old/ Unserviceable Air Termination of any description, complete all as per specified and as directed. NOTE :- (a) All Joints should be joined by Exothermic Welding or Brazing. (b) Calculation of Resistance is to be carried out upto 10 OHMS as per Para 132 of Section V of STEC Pamphlet No. .7 which is applicable to AMN Store Houses constructed with Specifications as mentioned in Section II of STEC Pamphlet No. 3 Revised in 2017.

M/s HALDER ENTERPRISE

M/s Singh enterprises

M/s Shiva Technical Enterprise