DD - MUMBAI CITY-MAROL- MMR ZONE- I INDUSTRIAL AREA... DC work.. Refurnishing work of MITL office at B Wing First Floor in Udyog Sarathi, Andheri.

Amount

Sub Estimate No.1 - Demolition & Civil works

Removing doors and windows with frames and stacking thematerials as directed with all leads, lifts etc. complete.

Removing wooden, glass or A.C.partition including frame work and stacking the materials as with all leads, lifts etc. complete.

Removing false ceiling in all types of ceiling i.e. Gypsum, Accoustical, Calcium silicate board, metal etc. including stacking the materials as directed with all leads & lifts.

Dismantling Brick Masonry in lime or cement mortar and stacking the material as directed with all leads & lifts complete.

Removing the existing cement plaster with POP/Putty of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.

Removing cement tiles, or marble or polished shahabad floor or dado or platform without bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Dismantling old electrical fixures of all types i.e. switch boards, lights, smoke detectors etc. including its wiring and stacking of serviceable material and disposal of unserviceable material with all lead and lifts.

Dismantling old sanitary fixures of all types i.e. W.C., urinals, wash basin etc. including its pipes and stacking of serviceable material and disposal of unserviceable material with all lead and lifts.

Dismantling old Sprinkler Sysytem and Air condition (any types) unit indoor, out door, all types Ducting, Grills,diffuser,fastner, rods,of all types of various sizes pipes Fexible pipes, etc. including its wiring and stacking of serviceable material and disposal of unserviceable material with all lead and lifts.

Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.

Providing and laying in position Cement Concrete 1:3:6 (one cement : 3 coarse sand : 6 graded stone aggregates of 12/20 mm nominal size). transported to site of work in Mannul for all leads and lifts on 5th floor, having continuous agitated mixer, Mamanufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the EIC/Architect.

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and laying 4 mm to 6.5 mm thick PVC plank flooring of approved make, made of 100% virgin PVC/ SPC backing with minimum 0.30 to 0.50 mm thick wear layer in required design and pattern in linear and curvilinear portions of the building. The planks are to be connected with glue free click connect joinery system and junction of the adjoining floors are to be finished with 'T' or any other approved profile of aluminum/ wooden/ S.S. of approved make as per manufacturer's specifications. The entire work is to be completed as per the direction of the EIC/Architect.

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.

Providing & fixing 100% Nylon based solution dyed tufted loop pile carpet tiles of approved size, make & pattern having minimum pile weight of 600 gm per sqm and minimum pile thicknesss of 2.5 mm in flooring over smoth & damp proof base using rubber based adhesive of approved quality & make complete with 'T' or any other approved profile of aluminum/ wooden/ S.S. of approved make as per manufacturer's specifications. The entire work is to be done as per manufacturer's specifications & directions of the EIC/Architect. Basic rate of Carpet: Rs.1800/- Per Sqmt

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm / 300 x 600 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)

Sub Estimate No. 2 - Plumbing Works

Providing and fixing chlorinated Poly Vinyl Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 mtr spacing. This includes jointing of pipe

15mm nominal OD pipe

20mm nominal OD pipe

Providing and fixing 15 mm dia Piller cock with guarantee against any manufacturing defect including socket, union nuts etc. complete. As per direction of Engineer - in - Charge.

Providing and fixing European type commode including outlet, inter connections through walls including all fittings etc. complete.As per direction of Engineer - in - Charge.

Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs and brass chain, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge.

Providing and fixing in position UPVC Nahani Trap including SS grating,fixing in cement concrete M-15 etc. complete.. b) 110 mm. size

Providing and fixing soap dish with all types of fixtures including labour charges including transport charges etc. complete.

Providing and fixing 15 mm dia 2 Way BIB cock long body with flange, guarantee against any manufacturing defect including socket, union nuts etc. complete.As per direction of Engineer - in - Charge.

Providing and fixing Jet Spray with guarantee against any manufacturing defect including socket, union nuts etc. complete.As per direction of Engineer - in - Charge.

Providing and Fixing of Mirrors in TOILETS of approved Indian quality,with under layer foam (hitlon) with S.S.bracket /studs 12mm thick dia top & bottom in the masonry etc. complete.As per direction of Engineer - in - Charge.

Supplying, Providing and fixing in position of approved make first quality, recessed, roller type or box type white glazed toilet paper holder 150 mm x 150 mm size etc.

Providing and laying UPVC pipes of standard make in line and level including necessary labour, bends, tees, fixtures etc. and testing the pipes complete.

100 mm diameter

75 mm diameter

62 mm dia

Providing and fixing Chromium Plated Alluminium Towel Rail 750 mm (2'6") long, 20mm (3/4") dia and of approved quality fixed on chromium plared bracket including providing teak wood gutties in masonry etc complete as per direction of Engineer - in - charg

Providing and fixing 15 mm dia Angle cock with guarantee against any manufacturing defect including socket, union nuts etc complete as per direction of Engineer - in - charge.

Providing and fixing in position Double coat hooks as per instructions from EIC/Architect

Providing and fixing in position Hand dyrer as per instructions from EIC/Architect

Providing and fixing in position SS sink for kitchen / pantry as per instructions from EIC/Architect

Providing and fixing 15 mm dia Piller cock for Sink with guarantee against any manufacturing defect including socket, union nuts etc. complete. As per direction of Engineer - in - Charge.

Providing and fixing in position CP brass concealed stop-cock with adjustable wall flange etc., complete as per drawings and instructions of EIC/Architect.

Providing and Fixing White glazed vitreous Chinaware urinals with integrated sensor including all fittings like CP brass flush pipe, CP brass spreaders with unions and clamps (all in CP brass), CP brass waste coupling 40 mm dia, inlet connection, concealed 'Z' CI brackets etc., all complete including cutting and making the good the walls and floors wherever required as per the architectural drawings, manufacturers specifiaction and as directed by the EIC / architect complete in all respects.

Providing and fixing frameless urinal partition of approved make made of 8 mm thick toughned glass. Rate includes patch fittings etc., as directed by the EIC / Architect.

Providing and fixing in position brass heavy duty gate valve 20 mm dia of zoloto make confirming to IS:778 with sockets, nuts and bolts etc., complete.

Sub Estimate No. 3 - Painting work

Providing & Applying Plaster of Paris Punning in average 12 to 25mm thickness to walls, ceiling, beams & columns to bring the surface in plumb Line & Level including making the surface smooth, providing required grooves on top of skirting etc. complete as per directions of Engineer - In - Charge.

Providing & Applying superior quality of Luster Paint of approved make & shade, using roller to get approved textured surface in 3 or more coats including preparation of surfaces, applying cement primer of approved make & shade etc. complete as per directions & manufacturer's specifications & instructions of Engineer - In - Charge.

Providing and applying plastic emulsion paint conforming to IS:5411-1991 part I of superior quality of approved make, colour and shade to the old & new surfaces in two coats over primers, including scaffolding, preparing the surfaces to receive the paint and applying putty etc. complete.

Finishing with Multi surface Zinc paint After surface preparation applying one or more coats of zinc based coat comprising of Zinc powder mixed with suitable medium in proportion1: 2 (One part of medium : 2 parts of zinc powder)@ 2.5 litre/10 sqm or as directed by Engineer-in-Charge and one coat of special primer applied @ 0.75 ltr /10 sqm over zinc coat. Top layer with two or more coats of approved luster paint/multi surface paint @ 1.25 ltr/10 sqm including preparation of surface even and smooth etc complete as per direction of Engineer-in-Charge

Providing and applying wash able oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

Sub Estimate No. 4 - Carpentry Works.

Providing and fixing in position Aluminium Frame Work of Square hollow sections of given size for partitions, paneling, boxing, soffits etc. with vertical & horizontal members at not more than 600 mm center to center. All complete including necessary additional supports, bracing, runner etc. so that lateral movement is arrested. as per instructions of Architect. Frame work will be measured and paid as per actual measurement on site. Rates quoted shall include the cost of providing and fixing supports up to ceiling. All complete as per detail drawing, as specified and as directed by Architect.

Size 50 x 25 x 1.62 mm

Size 50 x 50 x 1.62 mm

Providing & Fixing in position on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge.

9mm thk Marine plywood

12 mm thk Marine plywood

19 mm thk Marine plywood

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 30 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

Providing and fixing 3mm - 4mm thick group matching Decorative Veneer of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .The item includes finishing the surface with 3 or more coats of melamine polish, molding, lipping patti of all size etc and any material required to complete works as per the direction by Architect. (Basic Rate for veneer: Rs.180 per sft.)

Providing and fixing 1.5 MM thick group matching Laminate of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .(Basic Rate for laminate: Rs.55 per sft.)

Providing & fixing in position 460 mm deep storage / Wardrobe unit along with partitions etc with 1) sides,top,bottom shelves made out of 19 mm marine plywood 2)6 mm thk. marine ply backing panels 3) Shutters made out of 19 mm thick block board & 6 mm thick teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with melamine polish / PU coating.4) Finish 1mm thk laminate inside & 4mm thk veneer out side as per below mention, hardwares such as heavy duty hinges of size 100 x 19 x 25 mm, brass body locks(Elpro make) with extra large group key of approved quality, magnetic ball catchers, handles of dia 12mm x 128mm, towerbolt 150mm etc. All exposed woodwork to be finished with 3 coats of melamine polish / PU coating & all internal surface finished with approved 1 mm thk laminate. All as per detailed drgs and instructions of EIC / Architect. Size in front elevelation will be measured for payment.

Full height storage with veneer finish (FST)

Low height storage with Veneer finish (LST)

Over Head Storage with Laminate finish

Consul-unit 450MM Deep.

Full height storage with Laminate finish (FST)

Low height storage with Laminate finish (LST)

wardrobe storage

Compactor

Storages Providing & fixing in position 460 mm deep storage/Wardrobe unit alongwith partitions etc with 1) sides, top, bottom shelves made out of 19 mm marine plywood for all inside surfaces 2) 6 mm thk. marine ply backing panels 3) Shutters made out of 19 mm thick ply finish with material & 6 mm thick teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with melamine polish. 4) hardwares such as heavy duty hinges, brass body locks (Elpro make) with extra large group key of approved quality, magnetic ball catchers, handles, towerbolt etc. All exposed woodwork to be finished with 3 coats of melamine polish & all internal surface finished with 3 coats of french polish. The exposed surfaces shall be finished with 1.5 mm thk. laminate of approved shade & colour. All as per detailed drgs and instructions of EIC / Architect.

Sub Estimate No. 5 - Doors & Windows Works

Providing and fixing in position (as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box.

Providing and fixing best quality superior Indian teak wood frame for doors, windows and ventilators including all moulding, rebating, jointing, hold fasts of MS flats of minimum size 20 x 3 mm, having length of 225 mm for doors & 150 mm for windows and finishing with 3 coats of French polish or one coat of primer and synthetic enamel paint in two coats as directed etc. complete.

Providing & fixing 35mm thk. Phenol bonded Flush door finish with one side 1.5 mm thk. Laminate and one side 3 - 4 mm thk Veneer as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required.

Providing and fixing trap door made of aluminum powder coated inner/outer frames/corner fittings finished with gypsum board liner, sealing strips between inner and outer frames including concealed hinges, snap touch latch etc., complete. with 50x50mm alu.frame work support from ceiling to the trap door . The entire item is to be completed in totality as per manufacture's specifications and directions of the EIC/Architect.

Providing & fixing 35mm thk. Phenol bonded Flush door finish with 3 - 4 mm thk. Veneer on both sides as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required.

Providing & fixing door in position Partly Glazed Partly Solid door made up Phenol bonded of 35 mm thk approved flush door of approved size & 12 mm toughened glass approved beading, grooves, approved moulding including necessary hardware, approved adhesive, fitting & fixture Handel, Lock, Floor Spring etc. melamine polish to all exposed surfaces etc complete as per detail drawing as specified & as directed by Engineer-incharge.

Providing & fixing 35mm thk. Phenol bonded Flush door finish with 1 mm thk. Laminate on both sides as per approved designs. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, Panic door Handel, latches etc. as required.

Sub Estimate No. 6 - False Ceiling

Providing & fixing in position Gypsum Board False Ceiling as per manufacturer's specifications & instructions with 12.5mm thick 'Gypboard' Screw-fixed to the underside of suspended G.I. grid. G.I. grid should be constructed & suspended from the main ceiling as per manufacturer's instructions & specifications.G.I.grid should consist of ceiling sections at maximum centre to centre distance 450mm, Perimeter channel intermediate channels at maximum centre to centre distance 1200mm. The ceiling sections should be fixed to intermediate channels with connecting clips. G.I.grid should be fixed to R.C.C. slab above with the help of 25mm x 0.5mm strap hanger & soffit cleat. The joints between soffit cleat & strap hanger and G.I.grid & strap hanger should be with 6.4 x 12.7 mm nut & bolt. Soffit cleats should be fixed to R.C.C.ceiling with W.E. type 12mm dia, 17/16" long steel Rawl plug maximum center to center distance (both ways) of strap hangers should be 1200mm. The Gypboard should be fixed to G.I.grid with 25mm long Drawall screws.

Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Optra (Microlook) EDGE TILES WITH ARMSTRONG 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 66% GW & 74% RW%. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kgs/M2. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 & passed through 500 hrs of Salt test. The Tile & Grid system used together should carry a 15 year warranty. (Contractor should submit a performance certificate from Armstrong /Ecophone).

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

Providing and fixing Wooden rafter at ceiling at all height including providing and fixing of aluminium frame work and rafter made up of ply using 9/12/19 mm with complete hardware fitting etc complete as per direction of Engineer - in - charge

Providing and fixing Wooden ceiling at all height including providing and fixing of aluminium frame work and rafter made up of ply using 9/12/19 mm with complete hardware fitting etc complete as per direction of Engineer - in - charge

Sub Estimate No. 7 - Loose Furniture

Providing and fixing in position Meeting Room Table of approved shape shown in drawing. Table top made out of 19 X 19 mm & 50 X 38 mm T.W. frame work with both side 6mm thk marine plywood in two layers finished with approved veneer. Apron made out of 50 X 50 mm T.W. frame work with both side 9 mm thk marine plywood finished with approved Veneer. Edge of Table finished with 50 X 50 mm T.W. moulding with melamine polish. Footrest & skirting made out of 19 mm thk marine plywood finished with approved Veneer. Edge of footrest finished with 25 mm thk wooden half round moulding with melamine polish. 50 x 50 mm wooden connecting members. Rate including cost of wooden beadings, mouldings, inlays, etc. Top should be finished with approved Veneer. Sides finished with approved veneer & melamine polish. complete as per detail drawing, as specified and as directed by Architect.

Providing & arranging in position Executive Cabin Table Finished with Veneer in table size 2500 mm x 1200 mm x 750 mm) side table (size 1100 mm x 450 mm x 700 mm) desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching veneer all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lipping patti etc. drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved veneer in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved veneer. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved veneer from outside & laminate from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With veneer of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.

Providing & arranging in position Jt. Executive Cabin Table Finished with Laminate in table size 2500 mm x 1200 mm x 750 mm) side table (size 1100 mm x 450 mm x 700 mm) desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching laminate and all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lipping patti etc. drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved laminate. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.

Providing & arranging in position PA Cabin Table Finished with Laminate in table size 1300 mm x 600 mm x 750 mm) side table (size 900 mm x 450 mm x 700 mm) desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching laminate and all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lipping patti etc. drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved laminate. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.

Providing and placing in position Reception Table of required shape and size, vertical, top and bottom made of 19mm thk BWP marine grade plywood finished with approval Veneer on both side,the edge of top finished 12 x30 MM thick matching wood beading,the top finished in PU above 18mm thick glass top. The Reception table verticle,flap,Foot rest are in 19mm thk BWP marine grade plywood finished with Approval Veneer internal side and external above 6mm thick toughfned color back painted glass the edge of finished 12 x30 MM thick veneer matching beading. provision Flap shutter shall be provided for Services, electrical, cabling cutouts as per the drawing. All the exposed wood work are to be finished with three or more coats melamine polish. The entire item is to be completed in totality as per the drawing and directions of the EIC/Architect.

Providing & arranging in position Printer Table Finished with Laminate in table size 2000 mm x 600 mm x 750 mm) desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching laminate and all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lipping patti etc. drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved laminate.

Providing & arranging in position Cabin Table Finished with Laminate in table size 1500 mm x 750 mm x 750 mm) side table (size 1100 mm x 450 mm x 700 mm) desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC/Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top and shall be finished with matching laminate and all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards and mouse wherever necessary as per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lipping patti etc. drawings and also shall include CPU unit as shown in the drawings approved by EIC. No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposed surface of side unit to be finished with a approved laminate. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved laminate from outside & inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters, as per the drawing and details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With laminate of approved shade and make. All complete with necessary hardware,like key board, CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge.

Modular workstations consist of low ht. partition screen, work tops, Pedastal unit,filing stoarges( only in few cases), key board tray & CPU trolley as per specifications mentioned below.The profiles of the Aluminium partition frame should be as per the Work top - 25 mm hk. Pre laminated particle board cut to size & shape as per design & drawings. Edges to be fixed with 2mm thk PVC edge binding of approved make & matching to laminate Key board tray & CPU Trolley - Each work station shall have PVC moulded key board tray & M. S. powder coated CPU Trolley with castors. Pedastal unit - 3 drawer pedastal unit of overall size 450 deep X 450 wide X 725 ht made out of 18 / 16 mm prelaminated board for caracus & 12 mm prelaminated board for drawers. Top drawer to be on roller slides and two lower drawers to be of 3 extens Partition screen: 60mm thick to have one cable channel along main spine, MFC (Melamine Finish Chipboard) on both side upto table top ,each workstation with one tackable board and white board.Screen in front of the table to have frosted glass panel above

Modular workstations consist of low ht. partition screen, work tops, Pedastal unit,filing stoarges( only in few cases), key board tray & CPU trolley as per specifications mentioned below.The profiles of the Aluminium partition frame should be as per the Work top - 25 mm hk. Pre laminated particle board cut to size & shape as per design & drawings. Edges to be fixed with 2mm thk PVC edge binding of approved make & matching to laminate Key board tray & CPU Trolley - Each work station shall have PVC moulded key board tray & M. S. powder coated CPU Trolley with castors. Pedastal unit - 3 drawer pedastal unit of overall size 450 deep X 450 wide X 725 ht made out of 18 / 16 mm prelaminated board for caracus & 12 mm prelaminated board for drawers. Top drawer to be on roller slides and two lower drawers to be of 3 extens Partition screen: 60mm thick to have one cable channel along main spine, MFC (Melamine Finish Chipboard) on both side upto table top ,each workstation with one tackable board and white board.Screen in front of the table to have frosted glass panel above

Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc.

Sub Estimate No. 5 - Chairs And Sofa Works

Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery

Providing & arrangemnt of High back chair - tilt mechanism with multilocking, high density cushion on seat composite leather with metallic silver finish base and arms with P.U.castors, Gaslift for height adjustment.

Providing & arrangemnt of High back chair - tilt mechanism with multilocking, high density cushion on seat composite leather with metallic silver finish base and arms with P.U.castors, Gaslift for height adjustment.

Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery

Providing & Arrangemnt of Mid Back, Normal Syncro Mechanism, Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery

Single Seater Lounge / Sofa in Fabric 1. Varnished wooden base, skilfully crafted with finest hardwood for strength & durability. 2. Quality upholstery & fine stitching workmanship. 3. High Density Polyurethane Foam Come With Pocket Spring , to ensure a long lasting Shape of the sofa, provide soft and cushiony seating feeling and provide resilience for greater support and best seating comfort even for long seating hours.

Providing & supplying multi seater sofas with teakwood internal frame out of size min. 70x40mm as mentioned in drawing with necessary spring /rubberised coir/32 density polyurethene foam/100% latex rubber foam of appropriate quality & thickness as shown in the drawing with melamine polish on all exposed wooden surface. 75mm thk. for seat & 50mm thk for back. 25mm polyurethene in it to give required shape. The rate to include upholstry material of approved velvet(fabric) on outer side & on the inner side white cloth of approved qulaity shade etc. The contractor shall use appropriate size of frame work instead of mentioned to achieve desired shape & comfort as shown. All as per instructions of Engineer-incharge.

Single Seater Sofa Fabric finish

b) Two Seater Sofa Fabric finish

C) Three Seater Sofa Fabric finish

Sub Estimate No. 9 - Miscellaneous Works

Supplying, Providing & fixing in position of required size pelmets / jamblining made out of 19mm thick marine plywood finished with approved finish mention below and 3 coats of French polish for inside surface as per the direction by Architect. Item to be completed in all respect as per the drawing & instruction from Architect.

Veneer Finish.

1.5 mm thk Laminate Finish

Providing and fixing in position 19mm thk. Marine plywood for soffit finished with below mention including 25 x 25mm thk 2nd class TW wooden frame work (including paint)/ supports & mouldings, groove. Item to be completed in all respects as per drawings & direction by Architect.

Laminate Finish

Veneer finish

Providing and fixing in position 12mm thk soft board panelling with approved adhesive, partition surface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per drawings & directions by Architect.

Providing and fixing in position 12mm thk soft board panelling with approved adhesive, partition surface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per drawings & directions by Architect.

Providing and supplying Armstrong ‘Optra Acoustical Wall Panelling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire-resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of size 2100x600 or 600x600 mm providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd and construction adhesives as per the instructions laid down by the manufacturer.

Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)

The fabric shall be Pre-stressed composite material of High Tenacity Polyester Yarn with PVC Coating, Aluminium Backing, & Fungistatic Treatment. Fabric shall be of Soltis~B99-alu, Micro-Aerated - coated fabric to provide subtle view and should block the light flux & offer elimination of glare and sunlight / heat radiance. Composit. Weight: 540 g/m2 (+/-5%) Thickness: 0.47 mm (+/-5%) Fabric Openess Factor: 3% Visible Light Transmission: 0%(N-N) Solar Transmission : 0% Solar Reflectance : 25% - 69% Solar Absorption : 28% - 31% Tensile Strength (Warp/Weft): 160/170 daN / 5cm Tearing Strength (Warp/Weft): 11/13 daN Fungistatic Treatment: Degree 0, Excellent (EN ISO 846-A) Fire Retardancy:M1/NFP92507, B1-s2,d0/EN 13501-1, CLASS A/ASTM E84. Management Quality/ Environment – ISO 9001/ ISO 14001 Greenguard Certificate – UL 2818 Gold Certification Program for Chemical Emissions for Building Materials, Finishes & Furnishings Roller Tube shall be of extruded Aluminium alloy 38mm O.D (or as per system dimension) with a minimum wall thickness of 1.0mm duly anodised for long life. Clutch shall be wrap spring design with high strength fibreglass reinforced polyster assembly and high carbon steel springs to transmit motion from driving to driven members of clutch mechanism. Clutch shall operate by directionally with the use of an endless beaded chain. Clutch mechanism shall be crash proof, prevent slippage and shall raise and lower smoothly to any desired height.Clutch shall never need adjustment. Idler shall be of high strength fibreglass reinforced polyster,consisting of an outside sleeve and centre shaft. Sleeve shall provide bearing surface for roller tube and rotate freely on centre shaft, providing smooth, quiet and long wearing operation. Brackets shall be of tomised steel powdercoated to give superior finish. Bracket shall accommodateoverhead, side or face mounting with clutch assembly on either end of the roller. Bottom of the blind shall be provided with aluminium tube powder coated in a colour matching to the fabric. The fabric shall be enclosed in the suitably created pocket along with the tube. The tube shall be closed from sides with end caps to give a neat look.

Providing, fixing, applying by Company Trained Technicians, premium Wall Covering (Wall Fabric), as per details in attached specifications, or as per detailed specifications and colours attached, or approved equivalent, of approved colour, texture and design, including base and sub-base preparation(on top of existing P.O.P surface), all complete, in a neat and workman like manner, as per directions of Engineer-In-Charge.

Providing & fixing Artificate like Artifical Plant, Picture Frame etc. as per shown in drawing & manufacturers specification. Picture Frame / Plant

Providing and fixing in position mouldings out of T.W Moulding complete as per profile given in the detail drawing or as explained out of wooden sections of sizes given below. All should be finished with melamine polish of approved shade & color with minimum 3 coats. This item will operate only for those mouldings which are to be fixed independent of any other item as mentioned in the Bill of Quantities and not measured under any other item etc. complete as per detail drawing, as specified and as directed by Architect / Engineer

SIZE 15 X 15 MM

SIZE 50 X 50 MM

SIZE 90 X 12 MM

SIZE 25 X 38 MM

Polishing with PU coating above the veneer with required coats including knotting, preparing the surface etc complete as per direction of Engineer - in - charge.

Supply & Installation of 3M Crystal Glass film Frosted/DUSTED/ effect with approved artwork, cut using digital plotter. Self-adhesive, bubble-free installation to be done on clean glass , by Authorized Installers only.3M Architectural Markets. 3M interior Warranty for a period of 5 years for interior application.

Providing and fixing modular aluminium anodized skirtings - 1.5 mm thickness (minimum) of approved profile suitable for partitions, panelling and walls. The profiles shall be made from finest quality aluminium extrusions and anodized minimum 40 microns for high durability and corrosion resistance including all necessary fittings and accessories for installation as per the directions of the EIC/Architect. Height 100 MM

6 mm thk coloured toughened lacquered glass (back painted)

Providing Supplying and fixining WPC (Wood Plastic Composite) fluted panels are Various colour, Shape and Sizeas per the directions of the EIC/Architect.

Providing,aupplying,fabricating and fixingpanel of aluminium composite panel cladding in approved shape madeout of 4mmthickACPsheet material consistingof 3mmthickFR grademineralcorefollowingNBCpart VFireandlifesafety(having2hours fireresistanceinaccordancetoASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminiumsheets(each0.5mmthick of AA 5005/AA3105 grade) The aluminiumcompositepanel cladding sheetshallbecoil coatedwithkynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratioofPVDFandacrylic)coatingof approvedcolourandsg=hadeontop faceandpolymer(service)coatingof bottom face as specified using stainless steel screws,nuts,bolts,washers,cleats, weather silicon sealent,backer rods etc .overall weight of theACPshall not be less than 7.5 Kilogram/Sq.m)

Providing & Fixing of 6mm thk Corean Table Top with polishin of Approved make and colour as directed by Engineer in Charge. (Rates excluding GST)

Sub Estimate No. 10 - Electrical Works

LT Cables (Aluminum) (CB-LT/AL)

Supplying, erecting & terminating FRXLPE insulated, galvanised steel formedwirearmoured (strip) cable, 1100 V 3½ core 70 sq. mm. aluminium conductor complete erectedwithglands& lugsonwall/ trusses/pole or laid in provided trench/pipeasperspecification no. CB-LT/AL

Supplying, erecting & terminating FRXLPE insulated, galvanised steel formedwirearmoured (strip) cable, 1100 V 3½ core 25 sq. mm. aluminium conductor complete erectedwithglands& lugsonwall/ trusses/pole or laid in provided trench/pipeasperspecification no. CB-LT/AL

Bunch of Wires (WG-MA/BW)

Supplying & erecting mains with 4x16 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/busbars or any other places as per specification no. WG-MA/BW

LT Cables (Copper) (CB-LT/CU)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 2 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

PANEL AND DISTRIBUTION BOARDs MAIN LOW TENSION PANEL General Specification for Power Panels i)The Electrical panels should be procured from Central Power Research Institute(CPRI) approved Panel manufacturer. ii)Electrical panels shall be subjected to Megger tests and HV tests at site in the presence of Client/ Consultant as per the requirement of Client/Consultant. iii)The Contractor should submit 3 sets of as built drawings of the Electrical panels. iv)The Electrical panel's feeders should be properly labelled using engraved black anodized labels. Also, night glow radium labels shall be provided for each feeder specifying the name of the load. v)The detailed specifications missing in the BOQ should be followed from the Specifications and Electrical Single line diagram in ACAD format. vi)Contractor should submit the fabrication drawing, single line diagram and control logic system to Consultant for approval before fabrication of all panels. vii)The Electrical panel's main body, doors, partitions should be fabricated out of 2mm thick MS steel sheet. vii)Appropriate size knock out holes should be provided in the panels as per the size of the incoming and outgoing cables. Design as per technical specifications and obtain approval of drawings, prior to manufacturing, manufacture, insure, pack with PVC sheets, transport to site, store, erect in proper position, testing and commissioning of Indoor Duty and having IP 52 Rating LT panel cubicle and extendible type front and back operated having Top/Bottom Bus-Bars and Top/bottom Cable/Bus Duct entry, & fabricated using 14 gauge, CRCA sheet steel for main frame, door and partitions, dust and vermin proof lockable doors and carrying the control wiring using approved make FRLS colour coded Wires of minimum 2.5 sq.mm and using approved make push on terminals. The panel shall be floor mounting type, all complete with interconnections by using electrolytic grade tinned copper Bus Bars of 99.95% purity for Main, submain LT Panels and Cu/ Al busbars for other panels, colour coded heat shrinkable PVC sleeves. The Panel shall be painted with Powder Coated granular finished painting with 7 tank painting process with shade No. RAL 7032 from inside and outside all complete as per drawings, technical specifications and final approval of Consultant.

Providing & erecting floor/wall mounting, Panel Board, with door, suitable for four pole incoming 4P MCCB and outgoings up to 63A MCCBs/MCBs on iron frame, as below (Including all required components, busbar, wiring, metering, cable alley etc.) Incomer : 100A, 4P MCCB 18kA Thermal Magnetic Trip Unit Busbar : 100A, TPN Copper Indicator : LED type RYB phase indicators Multi Function Meter to read V A Hz KW KWh PF and with suitable set of CTs, 2A connector with Fuse Outgoings : 40A, 4P MCB 10kA x 2Nos. 32A, 4P MCB 10kA x 5Nos. 32A, 2P MCB 10kA x 3Nos. Capacitor Bank of total 25 KVAR capacity in steps as (5*4 + 3 + 2 KVAr) to work in auto mode (APFC), complete with all necessary accessories to maintain power factor near unity.

LT - MCBDBs (SW-MCBDB)

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways/phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB.

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection provided on iron/GI frame as per specification no. SW-MCBDB

LT - MCBs/ MCB Change Over Switch (SW-MCB)

Supplying, erecting & marking FP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying, erecting & marking FP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying, erecting & marking DP MCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

RCCB / RCBO (SW-RCCB/RCBO)

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.

Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying & erecting four pole ON LOAD change over switch, 415V, 100A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3. (Provision for DG Change over)

Point wiring for light/bell in min. 20 mm FRLS grade HMS Conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/SW. (Avg. length 6 mtr. from Switch Board)

Point wiring for light/bell in min. 20 mm FRLS grade HMS PVCconduit with 1.5 sq.mm (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/SW. (Avg. length 8 to 10 mtr. from Switch Board)

Point Wiring (WG-PW)

Secondary point wiring for additional light/bell point in min 20mm PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with required accessories as per specification no. WG-PW/SW

Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW

Point wiring for light/bell/exhaust fan in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW

Point wiring for independent plug in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E ) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW

Concealing of Conduits (WG-MA/CC)

Supplying & erecting HMS PVC conduit 20mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC.

Supplying & laying HMS PVC conduit 20mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC.

Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC.

Supplying & laying HMS PVC conduit 25mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC.

Supplying & erecting HMS PVC conduit 32mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC.

Supplying & laying HMS PVC conduit 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC.

Supplying & erecting rigid steel conduit 16 SWG 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC.

Supplying & laying rigid steel conduit 16 SWG 20mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC.

Supplying & erecting rigid steel conduit 16 SWG 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC.

Supplying & laying rigid steel conduit 16 SWG 25mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC.

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVCinsulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

ELV Cabling (WG-ELVC)

Supplying and installing FR PVC sheathed HDPE insulated copper cat-6 cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/ casing-n-capping as per specification no. WG-ELVC/NC

Supplying and installing FR PVC sheathed HDPE insulated copper cat-6A cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/ casing-n-capping as per specification no. WG-ELVC/NC

Telephone, Audio and Video Wiring (WG-TW/TW)

Supplying & erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S. Tape armoured polythene jacketed having laid in provided trench as per specification no. WG-TW

Telephone Accessories (WG-TW/TA)

Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TA

Supply & laying RG 6 wire in prelaid surface/ recessed PVC conduits

Supply & laying RG 11 wire in prelaid surface/ recessed PVC conduits

Modular switches and Accessories

Supplying and erecting modular type USB Charger socket of 1 module with nominal output voltage of 5V DC ±5% and nominal output current of 5V, 2-3A, on provided plate and box with wiring connections complete.

Supplying and erecting modular pop up Box 8 module with provided AV/ HDMI , RJ 45,6 A electrical sockets and switch on provided table .

Supplying and erecting modular type switch 6A/10A on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutter on provided plate and box with wiring connections complete.

Supplying and erecting modular type (two module) electronic step regulator for fan, on provided plate and box with wiring connections complete.

Supplying and erecting modular type T.V. socket single outlet on provided plate and box with wiring connections complete.

Supplying and erecting modular type telephone socket one gang with safety shutter on provided plate and box with wiring connections complete.

Supplying and erecting modular type computer Jack RJ 45 with safety shutter, on provided plate and box with wiring connections complete.

Supplying and erecting modular type bell indicator on provided plate and box with wiring connections complete.

Supplying and erecting modular type buzzer 220/250V on provided plate and box with wiring connections complete.

Supplying and erecting modular type blanking plate one module, on provided plate & box.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Networking Components (WG- NWC)

Supplying, fixing, and configuring 24 ports, PoE switch compliant with IEEE 802.3 standards with min. 193W PoE capacity with 4GE SFP uplink in provided rack as per specification no. WG-NWC/ENS

Networking Accessories (WG-NAS)

Supplying and fixing Cat 6A 24 port patch panel with keystone jacks compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 complete as per specification no. WG-NAS/PP

Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 500x550x613 mm) as per specification no. WG-NAS/RAK

Supplying, erecting & terminating 20 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete.

Indoor LED Fittings (FG-IDF/LED)

Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED Panel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting decorative pre-wired box type fitting / batten suitable for 4 feet, T8 LED tube light (excluding tube light).

Supplying and erecting anodized aluminium mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting CRCA powder coated light LED fitting (4 feet) Max. 33W with high transitivity diffuser with system lumens output of Min. 4000 lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 , IP20 rated including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED.

Supplying and erecting LED Strip light Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs at L70B50 including driver with minimum 1 year warranty as per specification No. FG-IDF/LED.

DMX Controller 5-in-1 LED lighting Control System, Easy to operate, Compatible with a variety of LED driving IC. Reliable communication, support WiFi wireless network transmission and real-time simultaneous display. Also can use internet’s remote control to achieve real-time simultaneous display. Achieving synchronization/offline seamlessly switch, no need any splitter.

DMX loop control cable suitable for above controller & dimmable lighting system in suitable size PVC conduit, including all accessories, support etc.

Supplying and erecting LED square / circular Max. 18 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver suitable for Dimming Purpose, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light (1200mm X 300mm) Max. 33 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver suitable for Dimming Purpose, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty, similar to specification No. FG-IDF/LED but suitable for Dimming application.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, Max. Energy Consumption of 28W having service ratio (CMM/W) of Min. 8, PF>0.9, THD<10% with IR remote control, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF.

Online Uninterruptible Power Supply (UPS) (AP-UPS)

Supplying, erecting, testing & commissioning of 10 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.9 to unity output pf ,3 phase input & 3 phase output complete with all protections as per specification no. AP-UPS(Without batteries)

Supplying, erecting, testing & commissioning of 3 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.8 to unity output pf ,single phase input & 1 phase output complete with all protections as per specification no. AP-UPS (Without batteries)

Batteries for Inverter & UPS

Supplying and erecting 12 V/100Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete.

Cable Tray (CB-CT)

Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.

Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of 200 mm width & 20 mm height complete with necessary hardware.

Supply & Installation of under floor Raceways, rectangular profile & Junction box. The cost shall include Chiselling/ floor Cutting as required to fix the u/f Raceways with supporting and fixing accessories including Joint sleeves, fasteners etc. (Refilling and Making good, finish floor will be in Civil scope)

GI Trunking, 75mm (wide) x 38 mm (height), single compartment

GI Trunking, 100mm (wide) x 38 mm (height), single compartment

GI Junction Box with cover, Adjustable 150mm X 150mm x 65-90mm

GI Junction Box with cover, Adjustable 225mm x 225mm x 65-90mm

Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX.

Supplying and erecting PVC box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX .

Intelligent Addressable Fire Alarm System (FF-AFAS)

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 1 loop capacity and capable of supporting not less than 250 devices and detectors per loop, with on-board LCD alphanumeric backlit display suitable for minimum 80 characters, operating at 230 V 50 Hz - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 minutes in alarm condition, The panel shall have suitable provision for network connectivity & compatible for third party integration(Open Protocol to communicate) via a MODBUS/BACNET interface etc. conforming to IS 15908:2021, IS 2189: 2008, NFPA-72, EN 54 / VdS/FM & UL 864(10th edition) with 3 years replacement warranty and inclusive of lifetime software license validity, as per specification no FF-AFAS/CP.

Supplying, installing, testing and commissioning of Addressable Optical Photo Smoke Detector. The detector shall have multi co-operative sensing technology for faster response & avoid false alarms. The detector shall have single/twin bi-colour LED for 360 deg viewing. The detector is conforming to IS 2189: 2008, 11360_1985_Reff2020_EN 54 /VdS / UL & FM approved with 3 years equipment replacement warranty, Designed to meet UL268, 7th Edition. FF-AFAS/SD.

Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with fixed temperature thermistor with 0°C to 88°C temperature range, complete with base as required, single/twin LED’s with 360 degree view, in-built locking mechanism to check the removal and pilferage of the detector, . Detector Shall conforming to IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 / EN 54 / VdS / UL & FM approved with 3 years equipment replacement warranty, Designed to meet UL268, 7th Edition, , as per specification no FF-AFAS/HD - ROR.

Supplying, installing, testing and commissioning of Addressable Multisensor/Multicriteria Photo Thermal (Smoke + Heat) Detector. The detector shall have twin bi-colour LED for 360 deg viewing. The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. This item is referred for Non-conditioning Area conforming to EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, Designed to meet UL268, 7th Edition.

Supplying, installing, testing and commissioning of addressable fire control/relay module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs etc., Module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982 reed relays / EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/CRM-FCM

Supplying, installing, testing and commissioning of addressable fire monitor module for flow switches, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device complete as required. Module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982 Reed relays, EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/MM

Supplying, installing, testing and commissioning of addressable fire isolator module for isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device. module complete as required. Module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982, , EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, FF-AFAS/ISM

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories, Module shall conform to EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/MCP.

Supplying, installing, testing and commissioning of Addressable Sounder cum Strobe rated at minimum 75 dB @ 3m for Audible annunciation and minimum 75cd flashing at 1 Hz for visual indication. Module shall conforming to IS 2189: 2008, IS 15908:2021 / EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/ S-ST

Conventional Fire Alarm System (FF-FAS)

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Public Address Systems (PA)

Supplying, installing, testing & commissioning 2-Way flush mount Ceiling Speakers with input power 20W RMS power, with power taps on 20/10/5W, 100V & 70V line, frequency response 90-18000Hz, stylish metal mesh grill and plastic frame, operates on 100V line for excellent reproduction of both speech and music, wide frequency response and adjustable tweeter complete as per specification no. PA-FMCS

Supplying, erecting, testing and commissioning of multistrand annealed bare copper conductor, transparent PVC insulated 2C x 1.5 sqmm speaker wire in provided trunking/conduit etc.complete as per specification no. PA-TSPWR

Supplying, Installing, testing and commissioning of Supercardioid professional Wired Dynamic microphone with noiseless magnetic read switch, frequency Response : 50-18,000Hz, Sensitivity : 2.5mV/Pa, Impedance : 300?, with quick detachable holder with 3-pin professional XLR connector & 10m twin core shielded low noise cable on provided stand complete as per specification no. PA-WDM

Supplying & erecting Microphone table/floor stand with height 350-530 mm, base dia. min 150 mm, min. weight 1.8 kg with superior quality of chrome plating/powder coating (resistant to rust & corrosion) having sturdy mechanism for ensuring trouble free movement and positioning of microphone complete as per specification no. PA-MTS

Supplying, erecting, Volume control with face plat and concealed metal box for PA speaker.

CCTV Systems (CCTV) Cameras (CCTV-CAM)

Supplying & erecting of High definition 2 Megapixel IP IR Bullet Camera with following features : Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 1920 x 1080 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 30m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 30m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security- User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no.CCTV-CAM.

Supplying & erecting of High definition 2 Megapixel IP IR varifocal Bullet Camera with following features, Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution : minimum 1920 x 1080 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8 - 13 mm Lens, auto/motorized varifocal focal, Field of View : horizontal FOV 103° to 32°, vertical FOV 73° to 24°, diagonal FOV 142° to 40° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance Min IR- 50m, Camera minimum Adj ustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 – Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of min 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in× 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night - Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no. CCTV-CAM.

Supplying, installing, testing & commissioning of 8/10 Ch. Network Video Recorder (NVR), suitable for 2 MP cameras only with HDMI/VGA outputs provided HDMI output of 4K resolution or VGA output with output up to 1920x1080. Support H.265 or higher, H.264, MJPEG, Incoming Bandwidth 80Mbps with minimum 2 SATA Hard Disks, ANR Technology, 2 SATA interfaces for 2 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 4/1, RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, support multi brand network Cameras, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc complete as per specifications no. CCTV-NVR

Supplying & erecting 4 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, Maximum sustained transfer rate 150MB/Sec to 180MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 64, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD

Supplying & erecting 32" professional LED Monitor with 1920*1080 (Full HD) Display, suitable for 16 channel NVR and following features Brightness: minimum 250 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC, USB, Audio In, Built-in speakers maximum 2 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON

Supplying and installing FR PVC sheathed HDPE insulated copper cat-6 armoured cable suitable for networking compliant with ANSI/TIA-568.2-D standards as per specification no. WG-ELVC/NC

Supplying and erecting 6 fibers LSZH armoured multimode optical fiber cable with, core dia 50/125 µm (OM3), suitable upto 10 GBPS, compliant to IEC 60793/IEC 60794 standards, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-ELVC/OFC

Supplying, fixing, and configuring 8-ports managed gigabit, layer-2 switch, 10/100/1000 base-T, PoE smart switch plus 2 SFP erected in provided rack compliant with IEEE 802.3 standards complete.

Supplying, Installing, Testing & Commissioning of Rodent Repellent system consisting of the following:

Transducers Above /Below False Ceiling (approx coverage area 150sq.ft)

Transducers Below False Ceiling (approx coverage area 300sq.ft)

Digital Type Microprosser based Master Controller with Graphic LCD display for controlling the parameters such as wave speed, wave density, frequency, Transducer testing. The controller should support upto 20 transducers in dedicated connection & 24 transducers in single loop @300/150 sq.ft each. The controller shall be networkable on RS 485 having facility to support Hardwired Third Party BMS integration via Modbus. The system shall use UL and CE approved transformers for power supply.

Testing, Commissioning & Verification Kit comprising of Ultrasound Wave Analyzer (Software and Hardware) that can do the following: a. Capture,Record and Report (in pdf format) One Third Octave Ultrasound Band Frequencies emitted from the transducers thereby ensuring HUMAN SAFETY as per IRPA (International Radiation Protection Association, Geneva) Guidelines. b. Capture,Record and Report (in pdf format) ultrasound output from each transducer depicting individual frequency peaks along with corresponding sound pressure levels, current operating band and the Controller Name for verifying the product.

Supplying and installing FR PVC sheathed HDPE insulated copper cat-6 cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC

Supplying, Installation & commissioning of Sony make 85” 4K LED TV having model no. FW-85BZ40H with bracket and proper installation etc. complete, as per direction of engineer-in-charge. (Rates Excluding GST)

Supplying, Installation & commissioning of Sony make 65” 4K LED TV having model no. FW-65BZ30J with bracket and proper installation etc. complete, as per direction of engineer-in-charge. (Rates Excluding GST)

Supplying, Installation & commissioning of Sony make 43” 4K LED TV having model no. FW-43BZ30J with bracket and proper installation etc. complete, as per direction of engineer-in-charge. (Rates Excluding GST)

Supplying and erecting modular pop up Box 8 module with provided AV/HDMI , RJ 45,6 A electrical sockets and switch on provided table

Supplying, erecting & terminating 20 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete

Sub Estimate No. 11 - Fire fittings System

Pipes (FF-PP)

Supplying and erecting G.I. pipe ‘C’ class ERW 20 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 32 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 40 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Valves (FF-VL)

Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 100 mm dia cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting 50 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Sprinklers (FF-SPR)

Supplying, erecting, testing and commissioning of Upright/ Pendent quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR./UP

Supplying, erecting, testing and commissioning of horizontal sidewall quartzoid bulb sprinkler, 15 mm (½") dia quartzoid bulb. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/SS

Supplying, erecting, testing and commissioning of concealed quartzoid bulb sprinkler, 15 mm (½") dia quartzoid bulb. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/CON

Supplying erecting, testing and commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1000 mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP

Supplying erecting, testing and commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1200 mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP

Supplying erecting, testing and commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1500 mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP

Fire Fighting Accessories (FF-FFA) Priming Tank

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and fixing of self expanding, ready to use polyurethane(PU) foam sealant of minimum 750ml bottle, suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). Sealant shall have minimum 2 hour fire rating , conforming to EN 1366-4:2021 as per specification no FF-FRS.

Fire Extinguishers

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Clean Agent Fire Suppression System (FF-FSS)

Supplying erecting, testing and commissioning of Direct Low Pressure (DLP), automatic electrical cabinet fire suppression system kit comprises of the mild steel cylinder, hydraulic tested to 30kg/cm2 to check for leakages & burst pressure above 110kg/cm2. duly hot phosphate & epoxy powder coated internally and externally more than 65 microns or painted with 1 coat of primer and 2 coats of red enamel paint all complete. The Cylinder assembly is filled with 4 kg to 4.54 kgs of clean agent gas (FK-5-1-12 UL listed) and pre-pressurized to 15/16 Bar having storage & operating temperature range of (-)17.8deg.C to 54.4deg.C with all important accessories e.g. brass assembly valve with pressure gauge, end of line plug with pressure gauge suitable to connect with provided Linear heat detection tube, complete with mounting bracket assembly, required size rubber grommets, plastic loop clamps, pressure switch and caution & cylinder Labels etc.

ABC type fire extinguishers of 6 kg. capacity having IS certification mark shall be provided & spread over each floor

Removal of Existing (non suitable piping & sprinklers for new Interior Plan) Sprinkler system, complete in all resepcts for proposed renovation area.

Sub Estimate No. 12- HVAC Works (High Side & Low Side)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 1 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 1.4TR (512 cfm) to 2.0TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete.The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (MD -2 & Meeting Room -2)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 1 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 1.0TR (441 cfm) to 1.3TR (512 to 530 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (Jt.MD Cabin-2, Waiting area-1)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 2 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.0TR (441 cfm) to 1.3TR (512 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oilcharge as per requirement during installation. (Ante Room, Server room)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 1 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 0.6TR (420 cfm) to 0.8TR (441 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.(PA Cabin-1 & Typical Cabins-1)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 2 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.0TR (441 cfm) to 1.3TR (512 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (Server area)

Supply, installation, testing and each commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal cooling capacity 1.0TR (358 cfm) to 1.25TR (417 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installationcomplete. (Printer Area)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 2 Way cassette room / indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.4TR (512 cfm) to 1.7TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (Reception-1 & Staff Area-5)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR (1100 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (Lobby Area-Stilt Floor)

Supplying, erecting, testing and commissioning of 18HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 22HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter / control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supply, Installation, Testing & Commissioning of Rectangular shape Sound Attenuators with high quality galavlanized sheet of min 22 G including high quality perforated galvanized steel sheet splitters/ baffles with Inorganic, fire resistant, vermin and moisture proof sound absorbent rock wool of 50kg/m³ density, with liner, duct connections to be made with required slip on PVC joints size of attenuator 600 mm x 450 mm x 150 mm

Supply & Installation of Factory Pre-cut SMART Pre-Insulated INDUS PIR Panels complete CFC & HCFC Free 17mm thick with 80 micron Embossed Aluminium foil (Anti microbial, Anti fungal, Anti corrosion and UV Protection coating) on outer sides and FSK foil in internal sides with close cell not less than 95% Rigid Cellular foam insulation of thickness (17mm for Internal Ducting) and material shall be Class O as per BS 476 Part 6 & Part 7 with 2 hours fire rating, with Density of 45 ± 3 kg/m3 and should have Thermal Conductivity 0.023 W/mK , Water absorption shall be not more than 0.03% as per EN 13403 standard and panel should be GreenPro , GRIHA & EPD & SGBC certifed. The ductwork should be capable of handling pressures upto 2000 Pascals. The joint between the ducts shall be with Polymer slide in type joint between the ducts and all other polymer accessories to be of the same manufacturer. Measurement would be done on outer to outer. Supporting of Threaded Rod (6mm) & C Channel/ Wire supporting of reputed make recommended by Manufacturer to be provided. Manufacturer to have experience of more than 10 years of producing the same material in India. (Approved Makes : Asawa Insulation, AURA, P3)

For Duct sizes below 1200 mm (Ducting in Rectangular shape, above false ceiling areas)

Supply, installation of GI ducting work with necessary mounting supports as per SMACNA Standards

22 Gauge

20 Gauge

Drain piping: Providing and fixing of 25mm Dia Hard PVC drain water piping with fittings, support and insulated with 6mm thick closed cell elastomeric nitrile rubber insulation complete as per specifications

Outdoor Stand Fabrication for Outdoor Split Units: Supply, fabrication and erection of Angle/channel/Flat iron stand, hanging arrangement for air conditioning machines including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of enamel paint as required as per specifications.

Bunch of Wires (WG-MA/BW)

Supplying and erecting PVC insulated PVC round sheathed FR 2.5 sq.mm (50 no. x 0.25mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV

VRV/VRF Air conditioning

Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 300cfm capacity with maintaining the static pressure minimum 20mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.

Existing wall /Core cut outs and other associated work to install ref net piping from IDU to ODU complete is all respects

Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

Supply, installation, testing and commissioning wireless remote control having colour LCD panel, real time clock, temperature limitation (16 to 30° C, functions like filter clean reminder timer suitable to communicate with wired controller complete.

Sub Estimate No. 13 - Structural strengthening of parking slot slab

Chipping of all loose and Spalling of concrete to bottom of slab, beams etc.(wherever required), cleaning of reinforcement, carrying out thorough sand blasting, application of anti-corrosive zinc rich epoxy primer to exposed reinforcement including cost of material, labour, equipment, tools, scaffolding etc. complete.

Providing and applying one pack bonding coat between concrete members like RCC slabs, columns, beams, chajjas, pardis etc and cement mortar plaster using Hack Aid Plast of approved make & approved by Engineer in charge. Clean the concrete surface thoroughly to remove dust, dirt, grime, deshuttering oils and rub down to a clean surface. Apply Hack Aid Plast of approved make & approved by Engineer in charge by spray on the entire concrete surface. Provide a lean cement - sand dash coat over the same. Allow the dash coat to set for around 24 hours. Further plastering as per specifications can continue.

Providing Repairing of honeycombs and minor damages with Polymer Modified Morter including material,labour complete in all respect.

P/fixing of carbon 100 mm x 1.4 mm carbon laminate with adhesive including of all manpower and equipments complete in all respect

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

Epoxy for joint sealing of tiles

Sub Estimate No. 14 - Architectural Consultancy charges

Preparing layout, drawings, plans, detail drawings, colour combinations, sample chart preparation etc. All designing work required for the work including the preparation of electrical layout all complete.

Mahendra Realtors & Infrastructure Limited (BID ID -6620650)