CERTAIN REPAIRS OF BLDGS IN GE CENTRE ,ENT,GYN DEPT AND OTHER WARDS, MD ACCN AND OTM ACCN OF BASE HOSPITAL AREA UNDER GE E/M BASE HOSPITAL DELHI CANTT-10

Amount

Taking down of chowkhat or frame (without taking off shutter from frame) n exc 1.50 Sqm and including builder hardware fitting complete all as specified.

Ditto all as S.No 1 here-in-before but exc 1.5 sqm and n exc 4 sqm

Taking down aluminium door/window chowkat exc 1.5 sqm and n exc 4 sqm with shutter incl all fittings complete all as specified and directed

Taking alluminium door/ window chokhat n exc 1.50 Sqm with shutter incl all fittings complete all as specified and directed

M&L for taking down to aluminium door shutter including refixing of same opening and repair of floor spring,door closer,hinges,of any size and including eassing out for smooth running of door complete all as specified and directed

Taking down old aluminium partition, any description fixed in any position complete all as specified and directed

S & F powder coated aluminium anodised section 63.50 x 38.10 x 2 mm thick gauge for aluminium partition wall and panel size not exc 1.00M x1.00M including 5mm thick plain/frosted tinted glass on top half portion and 12mm thick pre-laminated sheet fixed in half bottom portion complete and including all accessories of glazing clip and rubber etc all as specified and directed. Make:- Jindal/ Hindalco/Balco

S&F in fabricating and fixing frame and windows of aluminium powder coated of extruded aluminium section two track with two sliding shutters with following sections : (a) Frame section shall be 63.50 mmx38.10 mmx2 mm thick. (b) Two track bottom rail for sliding of shutters 61.85mm x 31.75mmx2mm thick. (c) Two track top section shall be 61.85mmx31.75mmx2mm thick(d) for sliding shutter handle& 'H' bottom section should be 40mmx(18mm+9)mmx1.45mm thick(e) sliding shutter to be provided with 5.5mm thick sheet glass( Modi/Saint gobain/tinted, plain, frosted (f) stainless steel wire clothes 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specified and as directed Make: Jindal/Hindalco/Balco

S&F in repair powder coated Aluminium grill Make-DECO grill Cat No. DG-104, 8 to 10mm thick fixed with separate channel to window/ventilatorcomplete all as specified and directed Make: Jindal/Hindalco/Balco

S&F aluminium powder coated door frame with partially glazed shutters single/ double leaf divided into two glazed panels including aluminium anodised snap beading and rubber gasket/lining for fixing of glass as directed. The frame shall be fixed with aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size all as directed. The frame and shutter will be made out of the following section and fitting a) Aluminium anodised door frame 101.60 mm x 44.75 mmx2mm fixed with aluminium thrust bolt in walls by drilling as directed. b) Aluminium anodised sides rail of shutter section 83.5mmx 44.5mm x 2mm c) Aluminium anodised bottom rail of shutter section 150mm x 44.5 mm x2mm. d) Aluminium anodised top and middle rail of shutter section 100mm x 44.5 mm x 2mm. e) Aluminium anodised tower bolt 200 mm long - 02 Nos in each leaf of Make Classic/Argent as approved. f) Aluminium anodised handle 250 mm long of approved Make Classic/Argent 02. No’s in each leaf. h) Glass Pane shall be 5.5 mm thick tinted glass. j) 12mm thick prelaminated particle board laminated both side exterior grade and lock including l) stainless steel butt hinges med gde 100mm size -3 Nos complete all as specified and directed Make- JINDAL/HINDALCO/BALCO.

S&F solid PVC moulded door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed.

S&F Factory made solid panel PVC moulded door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails,MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles &rails eith suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing including stainless steel butt hinges100mm size 1x 3 Nos,allmn tower bolt 200mm size 1 x 2 nos and Allmn handle 150mm size 1x 2 nos complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including bolts, if required, hook and pintle hinges; hand made sliding bolts; clamps; hold fasts either hooks and hinges or steel hanging door fitting etc conforming to Fe-410-W Gde-250 Quality -A all as specified and directed

Cutting hole in brick wall built in cement mortar for inserting holdfasts exceeding half brick but not exceeding one bricks and making good dismantled portion with PCC 1:2:4 type B1 using 20 mm graded aggregate in Cement Mortar 1:4 complete all as specified and directed

S & F flush shutters 35mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides including stainless steel butt hinges100mm size 1x 3 Nos,allmn tower bolt 200mm size 1 x 2 nos and Allmn handle 150mm size 1x 2 nos complete all as specified and directed. complete al as specified and directed Make: M/S Laxmi doors faizabad road Chinhat Lko/Jain wood ind sonepat brand( Jayna)/ Northern Doors Kanpur

S&F 35 mm thick second class hard wood glazed and skeleton shutters open rebated and preparaed to receive glass, gauge etc without sash bars in edges of forming sash bars edge of framing plane chamferred or rounded fitted with cut mittred beads for including stainless steel butt hinges 100mm size 1x 3 Nos,Allmn tower bolt 200mm size 1 x 2 nos and Allmn handle 150mm size 1x 2 nos complete all as specified and directed. complete all as specified and directed Make: M/S Laxmi doors faizabad road Chinhat Lko/Jain wood ind sonepat brand( Jayna)/ Northern Doors Kanpur

M&L for 300mm long aluminium alloy,anodised sliding door bolt with hasp and staple( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alumium alloy complete all as specified

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples or powder coated aluminium beading complete all as specified and directed.

Dismantling wall, ceiling boards (Fibre pulp. Insulation, AC boards,wooden boards etc) or insulation boards/slabs/composite panel, etc any thickness including existing snap grid of ceiling cover fillets including disposal of all debris exc 1.5 KMtr not exc 5 Km and complete complete all as specified & directed.

M& L for GI anodised snap grid ceiling made of Tee and angle of size 24.5 x 24.5 x1.50 mm thick, size of grid 605 x 605 mm with GI wire suspender 2 to 3 mm dia fixed with wooden/steel truss/rafter flat or slope including taking down old ceiling complete all as specified and directed. (Make : Everest,Armstrong or Equivalent)

M&L for 4 mm thick E-board(designer) classic of size 595 x 595 mm, fixed to GI snap grid ceiling flat or slope complete all as specified and directed. (Make : Everest, Armstrong or Equivalent).

M&L for false ceiling of PVC profile 10mm thick of 1mm sheet thickness screwed over grid of panel size not exc 1200mm x 600mm using mild steel RBS of size 50mmx25mmx1.6mm suspended with 3mm GI wire at a distance not exc 1.20 mtr in both direction on dash fastener embeded in soffit of roof complete all as specified & directed.

M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Hacking out old broken glass(any description, thickness, size, quality) from wooden frames complete all as specified and directed

S&F 5.5 mm thick sheet glass plane / tinted / frosested square exc 0.5 sqm in each pane complete all as specified and directed Make: Modi Float/Triveni Float Glass/ Saint Gobain

S&F sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane 3 mm thick complete all as specified and directed

M&L 12mm thick toughened glass required size area exc 0.5 sqm each pane fixed with standard stainless steel fittings as in door shutter complete all as specified and directed

S&F of solar control film 50 micron thick reflective type sticked to glass pane as per manufacturers instruction as specified and directed

S&F in repair 12mm thick toughened glass shelf required size area not exc 0.5 sqm each fixed with standard bracket fittings as in wall surface complete all as specified and directed

S&F in repair of tiles corner guard rubber size in 90 cm x 10 cm x 10cm with standard screws fittings as in wall tiling complete all as specified and directed

S&F in repair brass six lever dead lock with two key in aluminium door fixed with rawal plug complete all as specified and directed Make:Hardwyn/ Harison / Godrej

S&F in repair door closer hydraulically regulated designation No 2 universal type suitable for door shutters of 851 to 1000mm in width and of weight 61 to 80 kg aluminium die cast body and fixed complete all as specified and directed Make:Hardwyn/ Classic / Godrej

S&F in repair double action hydraulic floor spring heavy duty of size 11½" x 6¾" x 2½" confirming to IS 6315 for aluminium door incl cost of cutting floors as required in bedding in floors and cover plates etc complete all as specified and directed by Engr-in-Charge Make- Nexcia/Godrej/Hardwyn

S&F in repair aluminium beading both side of suitable size in alluminium door/windows complete all as specified and directed Make:JINDAL/HINDALCO/BALCO.

S&F in repair glass rubber 4 to 5 mm thick suitable for alluminium door/windows complete all as specified and directed

S&F in repair PVC door seal 1.20m width suitable for wooden door/wiremesh complete all as specified and directed

S&F in repair 6mm thick plywood grade BWP type BB fixed with screws to timber work in door/window complete all as specified and directed

S&F in repair 12mm thick plywood grade BWP type BB fixed with screws to timber work in door/window complete all as specified and directed

S&F in repair 12mm thick prelaminated (both faces three layer med density (exterior grade) partical board grade type 2 in aluminum doors complete all as specified and directed

M&L in repair for 300mm long aluminium alloy,anodised sliding door bolt with hasp and staple( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alumium alloy complete all as specified Make: Classic/ Argent or equivalent

S&F in repair 150mm long floor door stopper of Aluminum alloy body and tongue, anodised with hand drawn steel spring fixed in floor complete all as specified and directed.

S&F in repairs 100mm size aluminium hasp and staple and fixed with screws complete all as specified and directed.

S&F in repair 150 mm long extruded aluminium alloy handle fabricated type anodized all as specified and directed Make: Classic/ Argent or Equivalent

S&F in repair aluminium anodized extruded section tower bolt of size 200mm as in door/ window complete all as specified and directed Make: Classic/ Argent or Equivalent

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples or powder coated aluminium beading complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed

S&F of frammed work such as grills, grating etc. with ends of bars shoulder and /or rivetted or forged into spiokes framed guared bars, barred iron doors, ladders frammed balusters walkways etc conforming to Fe- 290 Gde E-165 complete all as specified and directed

M&L for stainless steel work as in grills, grating ,railing etc with ends shoulderd and rivetted or forged into spikes framed guard bars, balusters conforming to gde -304 with all jointing accessories like elbow, socket etc and fixed with PCC 1:2:4 in posts and the like including excavation where required and including dismantling of existing railings complete all as specified and directed

Taking down unserviceble steel window shutter and make it serviceable by repair/ replacing with new 50mm MS box type hinges,handle, pegstays,wire mesh & locking arrangement at any position with necessary welding work complete, and refixing the same to make window smooth functioning and making good plaster work around the window complete all as specified and directed.(including new items of wiremesh,hinges and handle etc)

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish out side MOD land complete all as specified and directed.

M&L Vitrified ceramic tiles Ist quality 10mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding layer in CM (1:6)complete all as specified and directed by Engr-in-Charge.

All as per item No.52 here-in-before but on vertical surfaces over and including 10 mm thick plaster in CM 1:4.

M&L for 7mm to 8mm thick Ist quality ceramic non skid tiles coloured of area exc 0.11 Sqm but n. exc 0.18 Sqm (400mm x 400mm) in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with tiles laid on 15mm thick cement screed (1:6) all as specified and directed

M&L for digital coloured glazed ceramic tiles of 400 x 300 x 7mm thick and 600 x300mm size 7mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates)

M&L for 2 to 3 mm thick linoleum,plain coloured laid dry in floors including stretching,cutting and fitting with sealed down approved adhesive over 10 rendering in CM (1:4) is to be finished even and smooth(without using extra cement)

Taking down cement plaster on brick or stone wall etc including racking out joint, hacking for key, scrubbing down with water etc.complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 and finished the surface even and fair w/o using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 and finished the surface even and smooth w/o using extra cement complete all as specified and directed

M&L for 10mm thick cement plastering on ceiling surfaces and finished the surfaces even and smooth w/o using extra cement in CM 1:3 complete all as specified and directed

M & L preparation of new surfaces of walls plastered or unplastered and applying two coats of cement base paint over a coat of white wash to walls to obtain uniform surfaces including making good the surface complete all as specified & directed.

M&L forprepration of new wall surface including priming plastered surface and applying for two coat of oil bound distemper over a coat a coat of 3 to 5mm thick wall care putty all as specified and directed

M&L for for two coat of oil bound distemper including preparation of new ceiling surface over one coat of primer/ chalk whiting complete all as specified and directed

M & L for two coats of Synthetic enamel painting on new wooden surfaces including one coat of pink primer complete including preparation of surfaces over 10 cm width or girth complete all as specified and directed

M & L for two coats of synthetic enamel paint on new steel surfaces including one coat of red oxide primer & preparation of surfaces over 10cm width and girth complete all as specified and directed

Supply and fix for venition blinds of standared size(1.20 M x 1.80 M) and colour as approved by AGE including necessary aluminium channel for operating the system as per manufactures instructions etc,complete all as specified and as directed Make :- Vista or Equivalent

Supply and fix in repair only Drapery curtain rod made out of Aluminium pipe 25mm dia duly powder coated with wooden finish best quality of VISTA or Equivalent

Supply and fix in repair only Wooden bracket and end funnels suitable for drapery curtain rods of 25mm dia of best quality or as per sample approved by Engr in charge.

S&F in repair oval type vitreous china wash hand basin snow white of size 560mmx470 mm (Make Cat No Cera 1005A) including cutting for and pinning in end of brackets,15mm angular stop cock,32 mm waste fittings,PVC connections as per reqd size ,brass chromium plated for glazed ware sinks,basins etc.including 15 mm bore CP fancy type piller tap with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia complete all as specified and directed.

S&F in repair bath room counter wash hand basin wooden cabinet (Make -somany or Jaquar cabinet basins wall mounted color white and brown size 580 x 475 x 470mm rect angular) including all accessories waste pipe,mixer,angle valve and looking mirror etc complete all as specified and directed.

S&F in repair 15 mm bore surgical elbow single lever wall mixer with ero disc Cat No 1042 screwed down,screwed for iron pipe or brass ferrule fixed complete all as specified and directed. (Make : vijay/Jaquar or equilant)

S&F in repair 15 mm bore surgical elbow action Bib taps fancy type Cat No 1035 screwed down,screwed for iron pipe or brass ferrule fixed complete all as specified and directed. (Make : vijay/Jaquar or equilant)

S&F of 2 Bay scrub sink made out of 16 guage thick 304 graded brushed finished stainless steel, 1.6mm thick, 1500mm length, width 565mm, height 1365mm with photoelectric sensors-2Nos, thermo static mixture valves-1 No, Solenoid valves- 2Nos with foot operated switch-2Nos spouts-2Nos for foam supply all as specified and directed.

M/S GEETANJALI ENTERPRISES

R K Enterprises

SHIVA ENTERPRISES

GLIBS CONSTRUCTION

M/S ANIL KUMAR

J.P. Enterprises