REPAIRS TO JOINERY, MS GRILL, ROLLING SHUTTER STEEL DOOR, MODULAR KITCHEN AND ALLIED WORKS IN OTM/MD ACCN OF DEPOT BN, RECORD OFFICE, CIW, MD ACCN OF AJIT VIHAR AND OFFR MD ACCN OF BEG AND CENTRE AREA UNDER AGE BR-II IN GE (CENTRAL) KHADKI.

Amount

Taking down chowkhats or frame with shutter (without taking off shutter from the frames) & removing from site exc.1.5 Sqm but n. exc. 4 Sqm each etc complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frames) & removing from site n exc.1.5 Sqm each etc complete all as specified and as directed.

Taking down shutters of any description exc. 1.0 sqm but not exc. 2.0 sqm each complete all as specified and as directed.

Taking down steel windows / ventilators of any description n exc 1.8 sqm each complete all as specified and as directed.

Supply and fix powder coated aluminium door made out of hollow extruded aluminium section as mentioned below: Each door having 02 Nos disc or D type handels, 02 Nos aluminium tower bolts 200 mm size one aluminium sliding door bolt or 250mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5 mm thick tinted glass and partly panelled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete. Chowkhat Frame : 101.60x44.45x1.55 mm Shutter verticle/stile: 85.00x44.45x1.56 mm Shutter middle rail : 83.50x44.45x1.54 mm Shutter top and bottom rail : 110x44.45x1.54 mm MAKE :- (i) Anodized aluminium section : Jindal/Hindalco, Indalco (ii) Particle board : Novapan, Duratuff (iii) Glass : Saint, Gobain, Modi Guard, TATA

Supply and fix in repairs aluminium extruded section body, door closer hydraulically regulated designation N0. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one guazed shutter for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos of glazed shutters including 4mm thick coloured glass and aluminium section weight not less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed.

Supply and fix for powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified and as directed.

Supply and fix pressed steel frames made of 1.25 mm thick MS Sheet size 105x60mm for doors, ventilator with single rebates including necessary fixing lugs, hinges, lock strike plate etc with and including PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

Supply and fix pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc with and including PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on SSR 2020 part II. complete all as specified and as directed. MAKE :- Rajshri/Sintex/Accucel/Duraplast

Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

Supply and fix factory made 35 mm thick plain framed panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood complete all as per specification & drawing and as directed by Engineer-in-charge.

Supply and fix flush shutter solid core 30 mm thick with brick board core & ply wood face panels commercial type on both sides complete all as per specification & drawing and as directed by Engineer-in-charge.

Supply and fix factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkats complete all as per specification & drawing and as directed by Engineer-in-charge.

Supply and fix steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauge bars of FI 10x 3mm thick dovetailed or welded complete all as specified and as directed by Engr-in-charge.

Dismantling mild steel work including doors, gates but excluding framed truss etc.complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs pre-laminated particle board 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl leaping patti complete all as specified and as directed by Engr-in-charge.

Supply and fix anodised aluminium shutters as in partition, aluminium section weighing 0.55 kg/ m fixed in aluminium chowkat frame of size 101.60x44.45x1.55 mm including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc complete all as specified and as directed

Supply and fix rolled mild steel in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 290 gde E 165 complete all as specified and as directed.

Supply and fixing mild steel plain black sheet in steel gates and similar work 1.60mm thick cut to size, holes punched: including round headed screws, clout nails or rivetes and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning upo mitred angles, etc as required and as directed by Engr-in-Charge.

Taking down old rolling shutter and refixing the rolling shutter on same position, including having 1.0 mm thick MS steel sheet, spring, MS safety lever locks with 4 lever, 3 nos of ball bearing and MS handles including all necessary greasing & easing, replacement of unserviceable parts including one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. NOTE :- Parts replaced shall be measured and paid seperately

Supply only MS steel sheet 1.0mm thick.

Supply only spring suitable for rolling shutter.

Supply only MS safety lever locks with 4 levers for rolling shutter.

Supply only ball bearing for rolling shutter.

Supply only MS handles 150mm in size for rolling shutter.

Supply and fix in repairs butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and as directed.

Supply and fix in repairs butt Hinges medium weight stainless steel 100 mm long complete all as specified and as directed.

Supply and fix 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix extruded aluminium alloy handles 150 mm, fabricated type, anodised complete all as specified and as directed.

Supply and fix stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and as directed.

Supply and fix stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 200mm long complete all as specified and as directed.

Supply and fix bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

Supply and fix 4 mm thick pin headed glass and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

Material and labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

Supply and fix small fittings such as brackets of any type latch and hinges block shaped doors and window stops and like including all necessary labour article n exc 200 Cubic Centimetre of 2nd class hard wood including 50mm butt hinges medium weight cold rolled MS complete all as specified and as directed by Engineer-in-Charge.

Cutting holes in brick/block/stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement concrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick.) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed by Engineer-in-Charge.

Description all as per item no 45 above but of anodised aluminium alloy complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair brass knobs 35-40 mm dia complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair mild steel 250mm, ordinary rat tail rod pattern springs including roller and roller plate fixing in wooden or steel door frame using nails or welding complete all as specified and as directed.

Material and labour 12mm thick plywood, grade BWP, type BB fixed with screws to timber frame work including taking down old unserviceable plywood complete all as specified and as directed.

Material and labour for steel rolling shutters thickness of laths in 1.00mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manual type, including taking of existing rolling shutter and taking in store, complete all as specified and as directed.

Description all as per item no 50 here in before but as in gear operated type with bevel gear box and crank handle complete all as specified and as directed.

Supply and fix for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and as directed.

Supply and fix in repairs to 8 feet pully operated cloth drying system, aluminium anodised 20mm dia pipes, including 4 connectors with double pully, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core& fitting material etc. complete all as specified and directed. MAKE : - Easy dry or other equivalent make as approved by GE.

Material and labour for non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Ditto all as per item no. 54 here in before but area of each tiles exc 0.11 sqm and not exceeding 0.18 Sqm in floors including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Ditto all as per item no. 54 here in before but area of each tiles exc 0.18 sqm and not exceeding 0.38 Sqm in floors including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour for glazed ceramic coloured tiles in vertical surface 450 X300x 7- 8 mm or 200 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. MAKE :- SOMANY (ELOGIO LIGHT, GLOSTRA SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour for solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame including taking down old wall lining complete as per direction of Engineer-in-Charge.

Demolition of brick /stone walls built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for pre cast cement concrete solid block masonry with solid block of the grade C1 (1:3:6) set in CM (1:6) complete all as specified and as directed.

Taking down cement or cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rendering 15 mm thick in cement mortar (1:4) on concrete block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar (1:6) on concrete block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preperation new plastered surface of wall and applying two coats of distemper oil emulsion (OBD) over a coat of primer on wall surfaces complete.

Material and labour for preparing new plastered surfaces and applying two coats of cement based paint (any tint) over a coat of primer on walls complete all as specified and as directed.

Supply and fix in repair laminated flooring oak wooden shade, width of laminate floor board is 193mm to 240mm and length of board is 1000mm to 1300mm over EPE foam with properly fix to the grooves given in the laminated sheets. Including all necessary locking patti at end of wall and window or door joints complete all as specified and as directed.

Supply and fix for powder coated aluminium sliding windows having FOUR Nos of tracks including two guazed shutter for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos of glazed shutters including 4mm thick coloured glass and aluminium section weight not less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed.

M/S K.D.MATE

JP ENTERPRISES

S M MISHRA

VP DEVELOPERS AND CONTRACTOR