ADDITION/ ALTERATION AND SPECIAL REPAIRS TO BUILDING NOS. P-1/15 AND P-1/17 AT KAMAT BAY, NAVAL BASE KARWAR

Amount

Dismantling of single layer Mangalore pattern roofing tiles all as specified and directed.

Demolition of cement concrete of any description and any position all as specified and directed.

M & L for wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 Kg per Sqm blended with grit or pea size gravel @ 0.006 Cum per Sqm, and lightly tampered (area of flashings etc., shall be added to the roof area) complete all as specified and directed by Engr-in-Charge.

Dismantling/ taking out existing hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismantled debris to a distance exc 200 m & not exc 250 m complete all as specified and directed.

M & L for water proofing treatment by applying oil bound bitumen primer, having a density of 0.87 - 0.89 Kg/lit, @ 0.40 ltrs/Sqm, providing and laying 4.0 mm thick APP modified water proofing membrane weighting not less than 4 Kg/Sqm and of approved make, including minimum 10 cm side lap and 15 cm end lap, laid and pasted with blue flamed torching applications all as specified and directed.

M & L for roof tiles Mangalore pattern, interlocking at side joints, laid dry all as specified and directed.

Description all as per item no 6.00 above but except tiles.

M & L for ridge or hip tiles to suit manglore pattern of roofing tiles, bedded and jointed in CM 1:6 all as specified and directed.

M & L for providing cement concrete in roof kerbs of mud stops, rounded or chamfered on edges type C1 1:3:6 using 20 mm graded crushed stone aggregate complete all as specified and directed.

M & L for plain cement concrete (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement complete all as specified and directed.

M & L for providing 15 mm thick rendering over roof slab when concrete is green in CM 1:3 mixed with water proofing compound @ 3% by weight of cement, finished even and smooth surface without using extra cement all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4 Sqm each including making good disturbed portion to match with adjoining surfaces and offering credit as per schedule of credit all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) not exc 1.5 Sqm each including making good disturbed portion to match with adjoining surfaces and offering credit as per schedule of credit all as specified and directed.

Taking down wooden door / window / CB shutters of any description, exc 1 Sqm but not exc 2 Sqm each and and offering credit as per schedule of credit all as specified and directed.

M & L for second class hard wood plain solid, straight chowkhats and frames wrought framed rebatted on the solid, rounded or chamfered put together with glue, pinned at joints all as specified and directed.

M & L for cutting holes in brick walls or cement concrete walls exc one brick but not exc two bricks built in cement mortar for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete (1:2:4) type B1 as required complete all as specified and directed by Engr-in-Charge.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; holdfasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed by Engr-in-Charge.

M & L for plain cement concrete (1:2:4 ) type B-0 using 12.5 mm graded aggregate as in coping, holdfast, cills, steps, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

S & F 35 mm thick plain framed 2nd class hard wood panelled factory made shutters (two panels) with style and rail of second class hard wood with lock rail and panel of 9 mm thick BWP commercial ply with size of rail and stiles as per IS 1003 (part-1) kin seasoned and chemically pressure treated all as specified and directed.

S & F 35 mm thick plain factory made second class hard wood skeleton shutters, open rebated and prepared to receive glass, guage etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered bead for securing glass etc with size of member of shutters all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing all as specified and directed by Engr-in-Charge.

S & F factory made solid panel PVC door shutter, 30 mm thick (stiles) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width struck in side with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as specified and directed.

S & F 100 mm butt hinges, extruded aluminium alloy powder coated with galvanised mild steel hinge pin anodised, type B-21 all as specified and directed.

S & F 125 mm butt hinges, extruded aluminium alloy powder coated with galvanised mild steel hinge pin anodised, type C-21 all as specified and directed.

S & F aluminium powder coated barrel tower bolts of extruded section 200 mm long complete all as specifed and directed.

S & F aluminium powder coated barrel tower bolts of extruded section 150 mm long complete all as specifed and directed.

S & F aluminum alloy powder coated sliding door bolt 300 mm long and not less than 12 mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

S & F extruded powder coated aluminum alloy handles, fabricated type and powder coated, 100 mm size complete all as specifed and directed.

S & F extruded powder coated aluminum alloy handles, fabricated type and powder coated, 150 mm size complete all as specifed and directed.

S & F in repairs brass sliding door bolt 300 mm long with sand or die cast brass hasp, staple (bolt type) and fixing bolts with rolled or drawn brass bolts complete all as specified and directed.

S & F in repairs brass handles, cast type, bright polished 150 mm size all as specified and directed.

Taking down aluminium sliding window shutter not exc 1 Sqm from track / tube by removing frame / track and refixing the same after replacing damaged / perished / rusted gauge / wire mesh / glass etc complete all as specified and as directed.

S & F in repairs aluminum alloy wire cloth, 0.45 mm nominal dia of wire & average width of aperture 1.4 mm and fixed with wire staples all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces over 10 cm width or girth including preparation new surfaces complete all as specified and directed.

S & F floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring and vulcanised rubber piece fixed in floor, overall length of cover plate 140 mm all as specified and directed.

S & F powder coated aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F anodised aluminium powder coated window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleat, glazing clips, rubber packing, anodised aluminium snap beading screws etc complete all as specified and directed.

S & F aluminium alloy wire cloth, 0.45 mm nominal dia of wire & average width of aperture 1.4 mm and fixed with aluminium wire staples all as specified and directed.

M & L for 4 mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed.

M & L for 4 mm thick figured glass, pin head type and glazing with wooden beading, not exc 0.5 Sqm in each pane all as specified and directed.

S & F aluminium grills of DG 104 (10 mm) powder coated complete all as specified and directed. MAKE: Decogrill or equivalent as approved by GE.

Dismantling boarding of any description, fixed any position with screws complete all as specified and directed.

M & L for 18 mm thick PVC ply both sides plain as in cupboards including solvent cement, stainless steel hinges, SS screws etc as per manufacturer's instructions complete all as specified and directed. MAKE: M/s Rajshree Plastiwood Ltd/ M/s Sintex industries Ltd/ M/s Everest Composites Pvt Ltd.

S & F stainless steel channels, 50 cm to 60 cm long suitable for moving the draws complete all as specified and directed.

S & F 19/20 mm dia stainless steel tubular pipe as in hanging rod including stainless steel brackets and fixing with SS screws complete all as specified and directed.

S & F magnetic catches brass body and striking plate including letting in all as specified and directed.

S & F in repairs aluminium die cast body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 85 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S & F in repairs aluminium alloy powder coated curtain rod/ hanging rod 19/20 mm dia all as specified and directed.

S & F in repairs aluminium alloy powder coated bracket with new screws for curtain rod all as specified and directed.

Taking down cement plaster from wall surfaces of any description etc including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 15 mm thick in CM (1:6) on fair faces of block masonry or concrete surfaces finished even an smooth without using extra cement all as specified and directed.

M & L for rendering 15 mm thick in CM (1:4) on fair faces of concrete surfaces and finished even and smooth without using extra cement and mixed with water proofing compound @ 3% by weight of cement all as specified and directed.

M & L for rendering 10 mm thick in CM 1:3 on ceiling surfaces complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of acrylic washable distemper over and including 1 mm thick Birla/JK white care putty to obtain smooth regular even finish using sand paper etc all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling and applying two coats of acrylic washable distemper over a coat of primer all as specified and directed.

M & L for two coats of exterior emulsion weather proof paint including preparation of surfaces on newly plastered surfaces of walls all as specified and directed.

M & L for applying 1 mm thick wall care putty on old plastered surfaces including preparation of surface by brooming down or steel wire brushing, scrapping down vegetation growth, efflorescent salts and trading with oil greasy spots and applying two coats of acrylic washable distemper over a coat of primer complete all as specified and directed.

Complete removal of existing treatment from old surfaces of ceiling by wire brushing, washing, rubbing down, and stopping of surfaces and applying two coats of acrylic washable distemper over a coat of primer complete as specified and directed.

M & L for preparation of old painted plastered surfaces of walls/ ceiling of any description over 10 cm girth or width including cornices and applying one coat of exterior emulsion paint all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M & L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm in floor etc laid over and including 15 mm thick screed bed in CM 1:4 set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M & L for galzed ceramic coloued tiles in vertical surfaces 300 x 450 x 7 mm thick over and including 10 mm thick cement plaster in CM 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M & L for vitrified ceramic tiles of premium quality, light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm (size 600 x 600 mm), laid in floors with neat cement slurry @ 3.00 Kg/Sqm over and including 15 mm thick screed bed of CM (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed.

M & L for vitrified coloured tiles of 600 x 600 x 10-12 mm thick as in skirting set and jointed in neat cement slurry and pointed in colour cement over 10 mm thick rendering in CM 1:3 including taking down old wall dado/finishes of any description, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and pavings not exc 15 cm thick (below or above ground level) and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

M & L for machine pressed interlocking paver block with grey cement and no pigment any shape and size conforming to IS-15658 2006 of 60 mm thickness M-35 grade complete all as specified and directed by Engineer-in-Charge.

M & L for sand filling under floors or in foundation including watering and consolidation all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type-C2 using 40 mm graded stone aggregate as in hardstanding/ plinth protection and finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation & filling in mass concrete complete all as specified and directed.

M & L for cement concrete type B1 1:2:4 using 20 mm stone aggregates as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed.

M & L for Pre-cast cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in solid block masonry exceeding 10 cm in width and set in CM (1:6) all as specified and directed.

S & F in repairs coloured vitrous china wash down water closet to suit 'P' or 'S' trap pan (pedestal pattern) of CASCADE type floor mounted closet and complete cistern flushing top pull slide and matching cover including fixing of bolts and flush pipe etc complete all as specified and directed. MAKE: Hindware Cat No 20024, 21038 starwhite or equivalent in makes as specified herein after.

S & F in repairs vitreous china wash down water closet (pedestal pattern) white, with plastic water closet seat & back with flat bottom and cover, MS chromium plated or aluminium anodised hinge device including fixing bolts and necessary connection with existing pipes etc complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, low level flushing cistern 10 ltr capacity, white colour with inlet ball valve, float, handle including brackets etc complete all as specified and directed.

S & F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals etc all as specified and directed.

S & F in repair brass chromium plated health faucet with spring pipe complete all as speified and directed. MAKE: Jaquar Cat No ALD-CHR-585 or equivalent as specified in list of makes.

S & F in repairs mirror mounted PVC cabinet of size 422 x 622 mm all as specified and directed. MAKE: Prayag Cat No 555 or equivalent in makes as specified herein after.

S & F in repairs towel rail 600 mm long brass chromium plated all as specified and directed. MAKE: Jaquar Cat No. CAN -1111N or equivalent in makes as specified herein after.

S & F in repairs stop valves/ angle valve, cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15 mm bore all as specified and directed.

S & F in repairs bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15 mm bore complete all as specified and directed.

S & F in repairs pillar taps cast copper alloy, fancy type, chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore of complete all as specified and directed.

S & F in repairs brass CP shower rose 125 mm size with swivel joints any size including to steel pipe or union complete all as specified and directed.

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm long all as specified and directed.

S & F in repairs 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe for wall and fixed complete all as specified and directed.

S & F in repairs chromium plated toilet paper holder fancy type fixed to wall with chromium plated brass screw complete all as specified ans directed.

S & F in repairs brass chromium plated towel ring round all as specified and directed. MAKE: Jaquar Cat No. CAN-1121NR or equivalent in makes as specified here-in-after.

S & F in repairs soap dish of brass chromium plated all as specified and directed. MAKE: Jaquar Cat No. CAN 1131N or equivalent in makes as specified here-in-after.

S & F in repairs stainless steel plate rack of size 0.9 x 0.99 m and thickness 20 guage all as specified and directed. MAKE: Nirali, Bluestar, Jayna, Prayag (Gold range, Silver range & Solitaire)

Taking up or down GI tubing 15 mm bore and connections all as specified and directed.

Taking up or down GI tubing 20 mm bore and connections all as specified and directed.

Taking up or down GI tubing 25 mm bore and connections all as specified and directed.

S & F 15 mm dia tubes medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20 mm dia tubes medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F 25 mm dia tubes medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs 25 mm dia gun-metal globe or gate valves, with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.

M & L in repairs for PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall 110 mm bore, complete all as specified and as directed.

S & F 100 mm dia PVC (SWR) bend all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M & L for point wiring with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694, 1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable drawn in existing conduit including CI/MS/PVC sunk boxes for mounting modular switches, sockets, regulators etc including modular frame and front white cover plate of required module of adequate size for one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed by Engr-in-Charge.

Description all as per item No 104.00 above but for 5 pin switch socket outlet 5 Amp on same board with other switches complete all as specified.

Description all as per item No 104.00 above but for 5 pin switch socket outlet 5 Amp on independent board with other switches, complete all as specified.

M & L for point wiring with 2.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694, 1990 and including one run of continous earth wire to common earth and connected to earth with 2.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable drawn in existing conduit including CI/MS/PVC sunk boxes for mounting modular switches, sockets, regulators etc including modular frame and front white cover plate of required module of adequate size for 3 pin switch socket outlet 15/20 Amp on independent board and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed by Engr-in-Charge.

M & L for point wiring with 4.0 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694, 1990 and including one run of continous earth wire to common earth and connected to earth with 4 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable drawn in existing conduit including CI/MS/PVC sunk boxes for mounting modular switches, sockets, regulators etc including modular frame and front white cover plate of required module of adequate size for 3 pin switch socket outlet 15/20 Amp on independent board and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed by Engr-in-Charge.

S & F in repairs modular switch piano flush button, 6 Amps, 1 module, 240 volts, single pole one way complete all as specified and directed by Engr-in-Charge.

S & F in repairs modular switch piano flush button, 6 Amps, 1 module, 240 volts, single pole two way complete all as specified and directed by Engr-in-Charge.

S & F in repairs modular socket outlet 2 in 1, 2/3 pin 6 Amps, 2 module, flush type all as specified and directed.

S & F in repairs modular socket outlet 2 in 1, 2/3 pin, 6/16 Amps, 2 module flush type all as specified and directed.

S & F in repairs modular bell push, flush type, 6 Amp, 1 module complete all as specified and directed by Engr-in-Charge.

S & F in repairs bell, AC, 230 volts, single pole complete all as specified and directed by Engr-in-Charge.

S & F in repairs lamp holder, insulated body, with back plate for batten fitting with LED Lamp 9 W complete all as specified and directed.

S & F in repairs LED tube light fitting 1 x 20 W, 6500 K including provision of flexible cable 3 core, 23/.0076 from ceiling rose to connector complete all as specified and directed by Engr-in-Charge. MAKE: Havells Cat Part No- LHEXBXPNIN1W020 or equivalent in Bajaj/ CG/ Wipro/ C&S/ Shakti.

S & F in repairs mini mirror LED box type light fittings of 9 W including making necessary connections complete all as specified and directed by Engr-in-Charge. MAKE: Havells Cat Part No - LHESABP7IN1W009 or equivalent in Bajaj/ CG/ Wipro/ C&S/ Shakti.

S & F in repairs decorative wall light fixture made up of polycarbonate, suitable for 1 x 10 W LED lamp (B-22 base) with back plate complete all as specified and directed by Engr-in-Charge. MAKE: Havells Cat Part No - LHFOFWE1TZ1W012 or equivalent in Bajaj/ CG/ Wipro/ C&S/ Shakti.

Taking down old burnt out bulk head fitting any type and installing LED Bulk Head 10 W with pressure plastic housing with clear prismatic diffuser, high efficient LEDs IP54 complete all as specified and directed by Engr-in-Charge. MAKE: Bajaj Cat Part No -BIBWP 10W LED or equivalent in CG/ Havells/ Wipro/ Halonix/ C&S/ Shakti.

S & F in repairs ceiling rose surface type bakelite 50 x 65 mm two to three terminals all as specified and directed.

S & F ceiling fan AC single phase 230 V of size 1200 mm sweep with blade including taking down old unserviceable ceiling fan any type/size, complete all as specified and directed by Engr-in-charge. MAKE: Bajaj/Havells/CG/Usha. NOTE: Old unserviceable ceiling fan to be deposited in MES store yard.

S & F exhaust fans AC single phase 230 V of size 300 mm (Steel body) with louvers shutter including making/ repairing hole in brick/ stone wall as per site requirement and making good disturbed surfaces including taking down old unserviceable exhaust fans any type/size, complete all as specified and directed by Engr-in-charge. MAKE: Bajaj/Havells/CG/Usha. NOTE: Old unserviceable exhaust fan to be deposited in MES store yard.

S & F in repairs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed by Engr-in-Charge.

S & F in repairs sheet metal enclosure powder coated DB for fixing of MCBs, SPN 12 ways double door, IP-42 protection with 200 Amp rated bus bar, 240 Volts including taking out old MCB DB of any type/size and removing from site to MES store for reuse if serviceable or for credit otherwise, complete all as specified and directed. MAKE: Havells/ Indo Asian/ L&T/ Legrand

S & F in repairs sheet metal enclosure powder coated DB for fixing of MCBs, SPN 8 ways double door, IP-42 protection with 200 Amp rated bus bar, 240 Volts including taking out old MCB DB of any type/size and removing from site to MES store for reuse if serviceable or for credit complete all as specified and directed. MAKE: Havells/ Indo Asian/ L&T/ Legrand

S & F in repairs MCB TPN 16-32 Amp, 415 V, 4 Pole, 10 KA breaking capacity, 'C' Series complete all as specified. MAKE: Indo Asian/ Havells/ Legrand/ Schneider/ Siemens/ C&S

S & F in repairs MCB SP, 240 V, 6-32 Amp 10 KA breaking capacity, 'C' series complete all as specified. MAKE: Indo Asian/ Havells/ Legrand/ Schneider/ Siemens/ C&S

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm burried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth not less than 1.5 m below ground level connected to galvanized wire 4 mm dia (earth lead) by means of check nuts and washer of galvanized iron, earth conductor protected by galvnised steel pipe 15 mm bore light grade and connected to main switch board, CI pit cover and frame duly painted with black bituminous paint, funnel with wire mesh, 20 mm bore GI pipe med grade for watering charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil incl PCC pit and testing after completion all as shown on electrical plate No-3 of MES Sch Part-I 2009 complete all as specified and as directed.

S & F in repairs modular switch piano flush button, 16 Amps, 1 module, single pole one way complete all as specified and directed by Engr-in-Charge.

KVL CONSTRUCTION

K.G.SHANKER

Bidder Name

K.G.SHANKER

KVL CONSTRUCTION

SIRI SALES AND SERVICES