Repair and Re-coating of Existing Epoxy Flooring in

Amount

Epoxy Flooring (4mm Screed + 2 mm top coat)

Surface preparation by mechanical carification, grinding with mechanical grinders, removing of dust particles, oil, grease and cleaning of grinded floor with broom and vaccum cleaner to provide proper key of the Epoxy coating to the floor. Filling up gap / cracks if any to the floor where Epoxy flooring is proposed and level the floor with epoxy mortar wherever required including epoxy primer, as per the direction of Engineer in-charge.

Applying highly penetrating epoxy primer KANFLOR PRIME 25/Asian Paint/Pidilite – or substantially equivalent to a thickness of 100- 200 microns with resins and hardner in 3: 2 ratio by volume using stiff brush, roller or leveller on dry prepared surface. The primer should be completely cured before application of screed coat. Allow the primer to dry to minimum 8 to 12 hours before laying he screed, as per the direction of Engineer incharge.

Applying KANSCREED UL / Asian Paint/Pidilite -- or substantially equivalent solvent free self leveling High strength builtup screed with 4 mm average thickness. The screed coat shallconsist of resin, hardner, formulated aggregates Fq. Sand 50/150. The screed shall be applied by notch trowel and mixing shall be done with an electric variable mixer thoroughly till obtaining homogenous mixture. The spiking shall be followed with spike roller in coating to remove entrapped air. The screed coat shall be allowed to cure for 12 Hours, as per the direction of Engineer in-charge.

Applying KANFLOOR SL/ Asian Paint/Pidilite – or substantially equivalent self-smoothing floor top coat with 2 mm average thickness in specified Ral colour. The material shall consist of resin, hardner, formulated aggregates and Colour Pigment as per RAL Colour Code in the pre-weighed kit. The Top Coat shall be applied by notch trowel and mixing shall be done with an electric variable mixer thoroughly till obtaining homogenous mixture. The spiking shall be followed with spike roller in coating to remove entrapped air and for getting proper leveled surface, as per the direction of Engineer in-charge.

Removal of PVC Vinyle Flooring A)Peeling of PVC Vinyle sheet B)Removal of sticking glue with hard grinding after sprinkling 80 mesh filler on the floor surface . C) Thorough cleaning with Thinner if required

POT Hole Filling with an average depth of 50MM Pot Hole filling with Epoxy Mortar & 200 Mesh Silica Sand to make the area in line and level with the adjoining floor Surface A)Removing all loose floor B)Thorough cleaning of the surface D) Applying Primer with KANFLOR PRIME 25 or substantially equivalent C) Filling with Kanscreed or substantially equivalent Epoxy Mortar with an average depth of 50MM to get the proper level in the floor.

Epoxy Coving 3 “( Wall to Floor ) Providing and applying wall to floor Epoxy coving of size 70 mm x 70 mm with the following scope of work: (a) Preparing the surface by mechanical scarification, vacuum cleaning, grinding, removing of dust particles, oil, grease if any to provide proper key to Epoxy coving. (b) Applying KANFLOR PRIME 25/ Asian Paint/Pidilite --primer coat. (c) Applying 3" coving by mixing silica sand and KANSCREED UL/ Asian Paint/Pidilite - or substantially equivalent epoxy screed. (d) Applying KANSCREED UL/ Asian Paint/Pidilite - epoxy screed on dried coving. (e) Applying putty on coving. (f) Applying two coats of PU elastomeric paint

Epoxy Coving 1.5 “ Providing and applying wall to floor Epoxy coving of size 35 mm x 35 mm with the following scope of work: (a) Preparing the surface by mechanical scarification, vacuum cleaning, grinding, removing of dust particles, oil, grease if any to provide proper key to Epoxy coving. (b) Applying KANFLOR PRIME 25 / Asian Paint/Pidilite - - or substantially Equivalent primer coat. (c) Applying 1.5" coving by mixing silica sand and KANSCREED UL / Asian Paint/Pidilite - - or substantially equivalent epoxy screed. (d) Applying KANSCREED UL / Asian Paint/Pidilite - or substantially equivalent epoxy screed on dried coving (e) Applying putty on coving. (f) Applying two coats of PU elastomeric paint

Yellow Line Marking Providing yellow line marking with width 100 MM with 2 component high elastomeric PU paint 2 coats over newly installed epoxy flooring

Stanrose Envirotech India Private Limited (BID ID -714270)

J P Coats (BID ID -727719)

PRASHANT PAGAR (BID ID -722654)

sandeep sampatrao phad (BID ID -722486)

Quantum Technologies (BID ID -710078)

SAI CONSTRUCTION AND SERVICES (BID ID -722069)

Alok Vilas Bahekar (BID ID -728518)

Ashkings Enterprises (BID ID -720703)

720DEGREE ULTRA CONSULTANCY LLP (BID ID -728617)

UJJAIN ENTERPRISES (BID ID -715408)

R.V ENTERPRISES (BID ID -715068)

Anchor Refractories Pvt Ltd (BID ID -707514)