Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.4 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹42.4 L+₹1.4 L (3.38%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹43.0 L+₹2.0 L (4.82%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹43.3 L+₹2.3 L (5.62%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹43.9 L+₹2.9 L (7.13%)Rejected-Finance C O PULAK SAHA MAHAKAL PALLY SURYASEN PARK MAIN GATE SILIGURI 734001 DIST DARJEELING | JALPAIGURI | WEST BENGAL | 734001 | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
22 Jun 2023, 6:00 pmClosed
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
CLEANING OF SEWAGE LINE MANHOLES SEPTIC TANK SOAKAGE PIT AND MISC WKS ETC AT ZONE A OF SEVOKE MIL STN UNDER GE SEVOKE ROAD
2023_MES_600242_1
8231/SEV OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹88,000
Yes
30 Jun 2023
1 Jun 2023
24 Jun 2023
1 Jun 2023
22 Jun 2023
16 Jun 2023
2 Jun 2023 - 10 Jun 2023
Amount
Cleaning of AC/CI pipes vertical or horizontal sewage line of any bore (from first floor to ground floor/ground floor to inspection chamber) by rodding thoroughly and removal of blockage by opening inspection chamber and flushing with water after cleaning complete as specified and as directed.(Cleaning of inspection chamber shall be measured and paid separately).
De-sludging, Cleaning and dewatering of sludge(liquid) from septic tank through pumping set or other mechanical means including cleaning of sludge/grass/bushes and disposing off sludge in the excavated pit as directed by Engineer-in-Charge including spreading bleaching powder and filling of pit by earth complete as specified and as directed by Engineer-in-Charge. Note :- (i) Earth to be filled over the pit shall be filled after sufficient absorption of liquid and size of pit shall be made accordingly. (ii) To avoid any health hazard or spreading of any foul gas, bleaching powder shall be spread as directed by the Engineer-in-charge. Cost of spreading bleaching powder and excavating the earth pit and filling of earth etc shall be deemed to be included in the rate quoted under this item but supply of bleaching powder shall be measured and paid separately.
De-sludging/cleaning completely of solid sludge by pumping and or manually from inside the septic tank and removal of sludge to a distance as directed by Engineer-in-Charge and depositing the sludge in a excavated pit of appropriate size as directed duly filled up with earth in layers of 30 cm thick including spreading bleaching powder and taking out RCC manhole cover slab for cleaning and resetting in CM 1:6 after cleaning complete as specified and as directed. Note :- (i) Earth to be filled over the pit shall be filled after sufficient absorption of liquid and size of pit shall be made accordingly. (ii) To avoid any health hazard or spreading of any foul gas, bleaching powder shall be spread as directed by the Engineer-in-charge. Cost of spreading bleaching powder and excavating the earth pit and filling of earth etc shall be deemed to be included in the rate quoted under this item but supply of bleaching powder shall be measured and paid separately.
Cleaning of sewage drain pipe of stone ware pipe, RCC Hume pipe , cast iron pipe of 75 mm bore by rodding with sectional sewer rod/flexible sewer rod/bucket etc thoroughly from inspection chamber to man hole or from one manhole to another manhole of any depth and size and well flushing with water after cleaning including removal of sludge and other materials obtained from cleaning the drain pipe and manhole garbage to a pit made for this purpose and filling up the earth complete as specified and as directed. Note :-(i) Cleaning of sewage line to be started from down stream side in this operation for which some pipe line gets cleaned automatically which needs to be cleaned by rodding only and hence the same shall not be measured (ii) The unit rate of the items shall be deemed to be included for the cost of removal of sludge/waste and water accumulated in manhole/inspection chamber due to cleaning of drain by rodding etc. (iii) The sludge obtained shall be deposited in an excavated pit and filled up with earth in layers of 30cm thick as directed by Engineer-in-Charge. Cost of spreading bleaching powder and excavating the earth pit and filling of earth etc. shall be included in the rate quoted under this item but supplying of bleaching powder shall be measured and paid separately. (iv) To avoid any health hazard or spreading of any foul gas bleaching powder shall be spread over each earth layers as directed by Engr-in-Charge.
All as per item No. 4 above but bore of pipe 100mm
All as per item No 4 above but bore of pipe 150mm
All as per item No. 4 above but bore of pipe 200mm
Cleaning of inspection chamber/gully trap including flushing with water or pumping air all as directed.
Cleaning of manhole any size and any depth complete including flushing water or pumping air complete as specified and as directed.
Excavation in trenches n.exc 1.5 m wide and exc 1.5m but n.exc 1.5m depth for pipes, manholes, etc not exceeding 10 sqm on plain and not exceeding 1.5 meter in depth and getting out in soft/loose soil complete as specified and as directed.
Excavation in trenches n.exc 1.5 m wide and exc 1.5 mm but n.exc 3.00m depth for pipes, manholes, etc not exceeding 10 sqm on plain and not exceeding 1.5 meter in depth and getting out in soft/loose soil complete as specified and as directed.
Demolition and breaking up drain pipes 200 mm (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar and removing from site of work to a distance n.exc 100 meter complete as specified and as directed.
All as per above item no 12.00 but 300 mm bore pipes
All as per above item no 12.00 but 150 mm bore pipes
All as per above item no 12.00 but 100 mm bore pipes
Material and labour for cutting into existing manholes for connecting new drains (internal dia pipe 150mm ) making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching complete all as specified and as directed
Material and labour for cutting into existing manholes for connecting new drains (internal dia pipe 100mm ) making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching complete all as specified and as directed
Material and labour fly ash brick work full brick , straight or curved on plain exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed
All as per above item no 18.00 but except brick
Material and labour for brick work with sub class 'B' bricks brickstone one and half brick thick honey comb straight or curved on plan to any radius built in CM 1:4 complete all as specified.
Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded mechanically crushed stone aggregate) as in plinth protection/footpath, surface to be finished even and smooth without using extra cement laid in alternate bays and joint to be filled with bitumen filler complete all as spd.
Material and labour for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed for drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete as specified and as directed.
All as per above item no 22.00 but for 300 mm bore pipe.
All as per above item no 22.00 but for 150 mm bore pipe.
All as per above item no 22.00 but for 100 mm bore pipe.
Material and labour for 200 mm nominal dia DWCPE pipe (SN-8) pipes ISI marked laid in trenches and joined complete all as specified and directed
All as per above item no 26 but 300 mm bore.
All as per above item no 26 but 150 mm bore.
All as per above item no 26 but 100 mm bore.
Demolition of brick work built in cement mortar including all quoins arches, pillars etc but excluding ashlars facings, dressed stone work & precast concrete articles complete as specified and as directed.
Material and labour for Brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built CM(1:4) complete all as specified and directed.
Material and labour for PCC 1:4:8 type, D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar (1:6) on other than fair face of brick wall including mixing of W.P.C. and finished even and smooth without using extra cement complete as specified and directed. Note : WPC shall be measured seperately.
Supply only Inegral water proofing compound complete all as specified and as directed.
Material and labour for rendering 15 mm thick in cement mortar 1:6 on fair face of brick wall and finished even and smooth without using extra cement complete as specified and directed.
Removal of surplus soil to a distance not exceeding 60m and depositing where directed at a level n.exc 1.5m above the starting point complete as specified and as directed.
Returning, filling in foundation including spreading leveling, watering and well ramming in layers not exceeding 25 cm depth complete as specified and as directed.
Demolition of cement concrete (reinforced) as in cover slabs, culverts etc of any description and in any position not other wise specifically provided for complete as specified and as directed.
Material and labour for precast RCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in cover slab and set in cm 1:6 including necessary form work and moulds complete as specified and as directed.
Supply only bleaching powder having chlorine contents minimum 30% ISI marked of approved quality complete as specified and directed.
Materials and Labour for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.
Material and labour for TMT bars 6 to 8mm dia as in reinforcement cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed not less than 0.9mm dia) complete as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittinges, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)
Supply and fixing 200 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
Supply and fixing 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
Supply and fixing 110 mm bore PVC (SWR) bends with/without door of any radius complete all as specified & directed.
Supply and fixing 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified & directed.
Supply and fixing 110 mm bore PVC (SWR) Vent cowl complete all as specified & directed
Supply and fixing 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
Supply and fixing 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
Supply and fixing 75 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified & directed.
Supply and fixing PVC floor trap with grating incl jointing to waste pipe of 75 mm dia in and including jointing with solvent cement complete all as specified and directed.
Supply and fixing PVC cast iron floor trap with grating incl jointing to waste pipe of 100 mm dia in and including jointing to water pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
Supply and fixing in repairs vitreous china Squatting pan "ORISSA" patern of size 580x440mm white, with integral foot rests P or S trap (excluding flushing cistern & flush pipe) incl provisioning of lime concrete bedding complete all as specified.
Supply and fixing in repair vitreous as china EWC white with 'P' or 'S' trap front or back inlet any pattern excluding flushing cistern & flush pipe but including plastic water closet seat black closed pattern with Flat bottom and cover and hinging device complete all as specified.
Supply only PVC valve less syphonic action type flushing cistern 10 ltrs capacity low level white with inlet, ball valve, float and handle including brackets complete all as specified.
Supply and fixing in repairs vitreous china urinal with fixing aceesories bowl type (back or corner wall type) complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, automatic flushing cistern with brackets, flush pipe grting and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.
Supply and fixing in repairs, cromium plated Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe, complete all as specified and directed.
Supply and fixing 15 mm angle stop cock cast copper alloy chromium plated fancy type with capstan head, wall flange screwed down screwed for iron pipe and fixed in repairs complete all as specified and as directed.
Supply and fixing for 450mm long PVC connections 15mm size with PTMT nuts, complete all as specified and directed.
Supply and fixing for 600mm long PVC connections 15mm size with PTMT nuts, complete all as specified and directed.
Supply and fixing in chromium plated health faucet with flexible pipe including fixing to steel pipe or union complete all as specified and directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the premises.
Material and labour for non skid coloured ceramic tiles of 8 to 10 mm thick (square/rectangular) area exceeding 0.11sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles including 15 mm thick screed bed or beding layer of CM 1:6 for laying of floor finises complete all as specified and as directed
Material and labour for glazed coloured ceramic tiles of size 450x300x 7mm thickness in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles including 10 mm thick rendering as backing layer in CM 1:4 for fixing of tiles on wall complete all as specified and as directed.
Supply and fixing 75 mm bore PVC (SWR) junction double, (double T), equal or unequal with/without door of any radius complete all as specified & directed.
Supply and fixing 110 mm bore PVC (SWR) junction double, (double T), equal or unequal with/without door of any radius complete all as specified & directed.
Supply and fixing 110 mm bore PVC (SWR) junction single, (single T), equal or unequal with/without door of any radius complete all as specified & directed.
Supply and fixing 75 mm bore PVC (SWR) junction single, (single T), equal or unequal with/without door of any radius complete all as specified & directed.
Material and labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring complete all as specified.
Material and labour chequred cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors over and including 20 mm thick cement mortar screed bed in CM 1:6 complete all as specified and directed.
Demolition of cement concrete in ground floors and paving n.exc 15 cm thick (below or above ground level) unreinforced complete all as specified and directed
Demolition of cement concrete unreinforced of any description and in any position copmlete all as specified and directed
Material and labour hardcore of broken stone or boulders of gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
Material and labour shingle filling in floors or pavings, laid in layers n exc 15 cm thick spread levelled and blinded with earth and rammed including watering complete all as specified and as directed
Material and labour for 50 mm thick PCC 1:3:6 type C-2 (using 40mm graded mechanically crushed stone aggregated) as in hardstanding/footpath surface to be finished even and fair complete all as specified and as directed.
Material and labour Machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size conforming to IS-15658-2006 of 60mm thick, M-35 Grade complete all as specified and directed
Material and labour for Sand cushioning under floors or interlocking paver block including watering and consolidation complete all as specified and directed.
Material and labour for Preparation of newly plastered wall surfaces and applying three coats of white washing complete all as specified and directed.
SRI SURAJIT SENGUPTA
B K SINGH
BIJAN KUMAR DHAR
MARWA CONSTRUCTION
Raj Enterprise
M/S S.B. CONSTRUCTION
ASSOCIATED TRADING CORPORATION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .