Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.5 LAccepted-Finance GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L1 | Accepted-Finance Lowest one | |
| 2 | L2₹46.8 L+₹33,260 (0.72%)Rejected-Finance ROOM NO 997 GALI NO 3 PART NO 3 GANESH MURTHY NAGAR CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹48.2 L+₹1.7 L (3.75%)Rejected-Finance 5 6 MINTO ROAD ALLAHABAD 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹48.9 L+₹2.5 L (5.27%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹59.0 L+₹12.5 L (26.9%)Rejected-Finance 47 HUSENI LAKDA BAZAAR 242 BELLAIS ROAD MUMBAI 08 | MUMBAI | MUMBAI | MAHARASHTRA | 400008 | L5 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NOFRA
Dr Homi Bhabha Road New Navy Nagar Colaba Mumbai
PERIODICAL CLEANING OF UNDERGROUND SEWAGE LINES IN UNDER CELL NO 2 AND REPAIR MAINT OF MES INSTALATIONS AND MAIN SEWAGE LINES IN NOFRA AREA UNDER GE NW NOFRA COLABA MUMBAI
2023_MES_599149_1
8199
Open Tender
Civil Works
Item Rate
300 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹1,000
GE NW NOFRA
₹1.7 L
Yes
6 Oct 2023
29 May 2023
28 Jun 2023
29 May 2023
26 Jun 2023
19 Jun 2023
29 May 2023 - 12 Jun 2023
Amount
Taking down cement plaster on brick/ surfaces built in cement mortor including raking out joints, hacking for key scrubbing down with water etc complete
Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc
M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
M&L for 20mm thick plastering in cement & sand mortar 1:4 in 2 coats (15 mm thick backing coat and 5 mm thick setting coat mixed with water proofing compound) on fair faces of brick work or stone masonary surfaces, finished even and smooth without using extra cement and all necessary scaffolding etc complete all as specified and directed (WPC shall be mesured and paid seperately).
M&L for 15mm thick plastering in cement & sand mortar 1:6 on fair faces of brick work or stone masonary surfaces, finished even and smooth (w/o using extra cement) including all necessary scaffolding etc complete all as specified and directed.
M&L for 5mm thick rendering on concrete surfaces as in ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified
Supply only integral water proofing compound
M & L for preparing new plastered surfaces on walls and applying two or more coats of 100% premium acrylic paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (compony depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces complete as specified and as directed.
M & L for preparating new plastered surafces of walls and applying three coats of white wash on walls on newly plastered wall surfaces complete all as specified and directed.
M&L for applying three coats of white wash on ceiling on newly plastered wall surfaces complete all as specified and directed.
M&L for preparation of newly plastered surfaces and applying two coats of oil emlusion distemper white or tinted over a coat alkali resistant priming paint over 3mm thick wall care putty on wall complete all as specified and as directed .
M&L for repair to Spalling of concrete, damaged surface of RCC elements like beams, columns, wall, slab by removing all loose cement plaster/concrete, dust, oil, paint, grease, waterproof coating etc, Expose fully any corroded steel in the repair area and remove all scale and corrosion deposits , Apply rust remover for rust free bars, apply Dr. fixit Epoxy zinc primer over the cleaned rebars and allow it to dry before pouring of Dr Fixit micro concrete or equivalent , appllying one coat of Dr fixit epoxy bonding agent before pouring of mix concrete, providing and laying of micro concrete at least upto 20mm thickness (average) by using the recommended water powder ratio mix the microconcrete with pan mixer as per manufacturer's instruction including watertight shuttering at any position including necessary curing and remocal of debris outside MD land complete all as specified and directed by Engineer-in-Charge. Note : (i) Rate of rust remover, Epoxy zinc primer, Epoxy bonding agent and micro concrete is included in this item. (ii) Make -Dr Fixit/Pidilite/ Asian paint/ Berger
Demolition of plain cement concrete of any description and in any position not other wise specifically provided for any description.
Roughening Surfaces of old Concrete Floor by picking, sweeping clean and washing down with water to remove dust etc brussing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and as directed
M&L for PCC 1:2:4 type B0 (12.5 mm graded stone aggregate) as in roof kerbs/pading or mud stops, rounded or chamfered on edegs using Pidiproof LW+ water proofing chemical of Dr. Fixit or equivalent as per manufacturer's instruction, etc complete all as specified. (Water Proofing Chemical shall be measured and paid seperately).
Supply only Water proofing chemical Pidiproof LW+ of Dr. Fixit or Equvalent.
M&L for the roof surface thoroughly wire brushed, washed and dried up and cleaned of all foreign matter and dust to receive bituminous primer, apply bituminous based cold applied primer @ 270 to 300 gms/Sqm manufactured by the same agency as that of APP all as per manufacturers instructions. Laying 5 layered 4 mm thick APP (A tactic poly propylene) modified membrane reinforced with 180 GSM (Gms/Sqm) of non woven polyester mat, applied by thermo fusion using LPG torch on the bottom portion of the membrane with an overlap of 100mm in longitudinal direction and applying two coats of bituminous aluminium paint on APP sheet incl removal of old damaged APP sheets and removing from MD land complete all as specified and as directed
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including 20mm thick screed bed in CM 1:4 complete all as specified.
M & L for Coloured glazed ceramic tiles in vertical surface 450 X350X7mm thick , set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles including 10 mm thick backing coat in CM 1:3 complete all as specified.
M&L for vitrified ceramic tiles 10 mm thick (square /rectangular ) polished dark shade, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the dark shade of the tiles including 20mm thick screed bed in CM 1:6 all as specified and directed .
Ditto- all as per item No. 21 above but as in skirting including 10mm thick rendering in CM. 1:4 as backing coat etc complete.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar
M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types incl 15mm thick Screed bed or bedding layer in CM 1:4 for laying floor finishes complete all as specified and as directed.
M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Extra over granite stone slabs for edge polishing/ chamfering/ noising/ grooves/ bevelling etc complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble, mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making surface good in hard/dense soil complete all as specified and directed.
M&L for PCC 1:7:12 type F2 using 40 mm graded stone aggregate as in filling, mass concrete etc.
PCC 1:3:6 type C-2 type (using 40mm graded crushedstone aggregate) as in foundation, filling and mass concrete including necessary formwork and demolition complete all as specified and directed.
Dismantling wrought iron or mild steel work of any descriptiion.
S&F Rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) of Fe-410-W(Gde-E-250) quality-B including distance pieces, cleats etc.
S&F Rolled mild steel as in Joist, channel, angle, or tee sections Fe 410 -W(Gde-E- 250) quality-A, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)
S&F for rolled mild steel plates of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting pletes, base plate etc. welding etc complete all as specified and directed .
S& F for mild steel framed work such as grills, gratings, angle irons, pipe sections, flat iron, railings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks, embedded in concrete and similar work con- forming to Fe.290.Gde-E-165 at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified incl all necessary scaffolding etc.
Dismantling plain or corrugated steel sheeting any guage, thickness, including Nainatal or similar pattern roof coverings.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
All as per item No. 37 above but plain sheets as in ridges/flashing.
Taking down eaves/valley gutter and rain water pipes/PVC pipes/CI pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-neck,etc. ( measured over all as fixed along the centre line over fittings and accessories)
S&F 160mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls with and including fixing clips, bends, elbow, shoes bends etc. (Note:- Measurment shall be taken along the centre line of the pipes.)
S&F 50mm, low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc in repairs.
S&F 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls or laid in flloors/trenches
S&F 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls or laid in flloors/trenches
M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with solvent cement fixed in repairs.
S&F in repair vitrous china squatting pan 'Orrisa Pattern' size 580x440mm white with integral foot rest including connecting and necessary provision of lime concret complete all as specified and directed by Engr-in-Charge
S & F in repair white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover etc, fixed in repair complete all as specified.
S&F vitreous china urinals, bowl type, flat back, size 465X355X265mm, white, with grating and union for discharge pipe, complete incl. providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing of flush pipe, grating and Union for discharge pipe fixed in repairs
S&F in repair 10 litres capacity PVC low level flushing cistern of approved make including ball valve, syphon set, inlet and outlet pipe complete
S & F in repair white glazed earthen ware vitreous china wash hand basin of size 550 x 400 mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet, PVC connector pipe etc complete
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm
S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes all as specified and directed.
S&F 15 mm bore dia of pipe, brass chromium plated fancy type bib tap fixed in repairs
S&F in repair chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, fixed in repairs.
S&F in repair PVC Connections 15mm size with PTMT nuts of length 600mm
S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends
Taking down 15 mm bore, GI tubing and connections including cleaning for refixing or removal to store.
Taking down 20 mm bore, GI tubing and connections including cleaning for refixing or removal to store.
S&F 15mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.
S&F 20mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed
Surface excacation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed
M&L hardcore of gauge n. exc 63mm of brocken stone or boulders, deposited, spread and levelled in layers n exc.15 cm thick watered and rammed to a true surface complete all as specified and directed
M&L for 100 mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in sub base, foundation of manhole, filling, mass concrete etc. complete all as specified and directed
M&L for Sand filling under floors or in foundation including watering and consolidation all as specified and as directed
Machine pressed precast concrete interlocking paver block with Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thick confirming to IS 15658-2006 made of M35 grade concrete complet all as specified and directed
M&L for Chequered cement concrete tiles 300x300x25mm etc. glosy finish set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over and including 20mm thick screed bed in CM 1:4, including dismantling complete all as specified and as directed by Engr in Charge.
Removing excavated material n. exc. 50m and n.exc 250m depositing where directed at a level n. exc.1.5 m above the starting point complete all as specified and directed
Taking down chowkats or frame with shutter (without taking off shutter from frame), n exc 1.5 sqm each complete all as specified.
Taking down chowkats or frame with shutter (without taking off shutter from frame), exc 1.5 sqm but nexc. 4 Sqm each complete all as specified.
S&F 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side.
S&F Decorative laminate 0.9 mm thick, type 1, of texture finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions.
S&F powder coated aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, screws, handles, hinges, tower bolts etc. complete all as specified. Make: JINDAL/HINDALCO/INDALCO. Note :- (i) Glazing and wire mesh shall be measured and paid separetely for supply only as the labour element included in this item. (ii) Item shall be paid as per weight of aluminium section. (iii) the rete quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.
S&F 4 mm thick sheet glass, ordinary quality, in any size of pane
S&F 4 mm thick figured glass, pin headed type, in squares n exc 0.5 Sqm in each pan.
S&F in repairs Sun control film, 50 micron non reflective type,sticked to glass as per manufacturers instructions and as directed by EIC ( Make - Garware or equivalent as approved by GE).
S&F 12 mm thick Medium density fibre board, exterior grade both side decorative choice laminations, fixed to timber/ Aluminium frame work with screws
S&F aluminium (Die cast) body, door closer, hydraulically regulated, desig. No. 2, unversal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg
S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed
S&F stainless steel butt hinges of size 100mm all as specified and directed.
S&F Aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and as directed
S&F Aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and as directed
S&F extruded aluminium alloy handle fabricated type anodized 100mm long complete all as specified and as directed
S&F extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and as directed
M&L for Steel rolling shutters 1mm thickness of lath sheet without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; gear operated type with bevel gear box and crank handle as in repair incl removal of old rolling shutter to store complete all as specified and directed.
Fixing for chain link MS galvanised fencing any size or type including line wires, any mesh, size and type to any type standards, rails, straining bolts, etc. including provision of binding wire and including necessary nut and bolts, includinng dismantling complete all as specified and as directed.
Supply only chain link MS gavanised fencing mesh of size 50 x50 mm, 4.0 dia with aluminum 1.0mm thick PVC coating fixed to any stranded raits straining bolts etc all as specified and as directed.
M&L for Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for Preparation of old painted steel surfaces of any description not otherwise over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified.
M & L for complete removal of existing treatment on wall surfaces and applying 3mm thick wall care putty, sanding the surfaces till even and smooth finish and applying one coat of wall primer, and finally applying two coats of oil bound distemper of approval tint.
M&L for Preparation of old plastered or unplastered decorated surfaces of wall including cornices, pillasters etc and applying one coat of white wash on walls complete all as specified.
All as per item No 90 above but in ceiling.
M & L for Complete removal of existig treatment of walls and applying two coats of cement base paint of external surfaces over a coat of primer complete including necessary scaffolding for any postion/height all as specifed and directed by the Enginner - in -charge.Note :- (a) Acrylic painting shall be done with rollers. Make -Dr Fixit/Pidilite/ Asian paint/ Berger
(a) Cleaning and desilting of sewage lines of any size any any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed by Engr-in-Charge. (b) If required getting a honey sucker and cleaning the heavily congested sewage line. (c) JCB and other machinery required on special basis would be called on requirement basis.
(a) for 150 mm dia pipe line
(b) for 200 mm dia pipe line
(c) for 300 mm dia pipe line
(a) Cleaning and desilting of manholes depth not exceeding 1.50 meter by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed by Engr-in-Charge . (b) If required getting a honey sucker and cleaning the heavily congested sewage line. (c) JCB and other machinery required on special basis would be called on requirement basis.
Cleaning and desilting of manholes depth exceeding 1.50 m but not exceeding 3.00 met by pumping out/removing liquid waste/sewage and plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside MD land all as per existing rules & regulations of civil authorities and cleaning the manholes with freah water etc complete all as specified and directed by Engr-in-Charge.
Removing/cleaning of chocks/blockades of sewage of any size between manholes at any depth including pumping liquid waste/sewage, plugging and diverting the flow in the drain if necessary using Kampti/cleaning rods, choke removing machine etc and including taking precautionary and safety measures such as use of safety belts, dry cells, torch for lighting inside the manholes and drains etc including drains manholes on either side and sewers passing hole knots disc of required size and sprinkle bleaching powder at places from where they are removed etc complete all as specified
Cleaning the chocks/blockades in AC/CI/PVC soil waste/rain water pipe of any dia by removing cleaning eye and refixing the same after cleaning the pipe, making good damaged cement joints, dia of pipe not exc 150mm dia upto ground/stilt plus four floors including necessay scafolding. Note :- Including removing of trees upto and incl 4th floor and filling of holes with water proofing compound.
–Ditto- all as per item No 97 above but 5th to 8th floor
–Ditto- all as per item No 97 above but 9th floor to 12th floor
–Ditto- all as per item No 97 above but 13th floor to 16th floor
S&F in repairs cleanings eye (oval access door) for bends , branches, etc of dia not exceeding 100mm at any floor level
M&L for Jointing only 100mm bore of cast iron pipes and fittings or AC pipes in repair with cement joints upto ground/stilt plus 16th floors.
M&L for Jointing only 75mm bore of cast iron pipes and fittings or AC pipes in repair with cement joints upto ground/stilt plus 16th floors.
Excavation in trenches n,exc 1.5m wide and n.exc 1.5m depth for foundation etc or for shafts, wells,cesspits, manholes, pier holes etc. n.exc 10sqm on plan and n exc 1.5min depth and getting out in soft/loose soil complete all as specified and directed.
Returning and filling in soil incl spreading, levelling, watering and well ramming in layers n.exc.25cm in foundation trenches completed all as specified and directed
Removing Excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.
M&L for PCC.1:4:8 type D2 (40 mm graded aggregate) as in foundations of manhole,fillinng and mass concrete complete all as specified and directed
M&L for PCC 1:2:4 type B1 as in coping, surface channels, benching,etc. for manhole finished fair and even complete all as specified and directed
M&L Salt-glaged stoneware drain pipes 150mm internal dia, laid in trenches and jointed as specified including dismantling of existing drain pipe and taking out of trenches complete all as specified and as directed.
M&L Salt-glaged stoneware drain pipes 300mm internal dia, laid in trenches and jointed as specified including dismantling of existing drain pipe and taking out of trenches complete all as specified and as directed.
M & L for Plain cement concrete 1:3:6 type-C2, using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes with concrete after they are laid and tested in for 150mm bore of pipe complete as specified
M & L for Plain cement concrete 1:3:6 type-C2, using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes with concrete after they are laid and tested in for 300mm bore of pipe complete as specified
M&L for precast manhole cover with plain faces using RCC 1:2:4 type B1 and set in CM 1:4 including formwork complete all as specified and directed
M&L for TMT bars 10mm dia and over cut to length bent to shape spirally for hooping, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing clips, etc., complete all as specified and directed
M&L for TMT bars 6 to 8 mm dia, cut to length bend to shape reqd incl cranking and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed
Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped ends etc complete all as specified and directed
S & F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers , stop valve boxes, gate stops, parts of ranges , balusters and similar articles exc 5 Kg each. complete all as specified and as directed.
Cutting into existing manholes for connecting new drains, making good to pipe internal dia of pipe 150mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished , and reforming benching as required
Cutting into existing manholes for connecting new drains, making good to pipe internal dia of pipe 225mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished , and reforming benching as required
S&F 100 mm bore of sand cast CI soil, waste and vent pipe in any length with ears and jointed with neat cement paste fixed to wall upto 16th floor.
S&F in repair 100 mm bore of sand cast CI bend of any radius with ovel access door and jointed with neat cement paste.
S&F in repair 100 mm bore of branch piece single branch of any radius with ovel access door and jointed with neat cement paste.
S&F 75 mm bore of sand cast CI soil, waste and vent pipe in any length with ears and jointed with neat cement paste fixed to wall upto 16th floor.
S&F in repair 75 mm bore of branch piece single branches any radius fixed to ovel acess door and jointed with neat cement paste.
S&F in repair 75 mm bore of sand cast CI bend of any radius with ovel access door and jointed with neat cement paste.
S&F 160mm dia PVC (SWR) bends/shoes any radius.
M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floor using chemical emulsion at the rate of one liters perhole, 300mm apart includeing drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & directed by Engineer-in-Charge.
M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 Litres per linear including drilling and plugging holes etc. complete all as specified & directed by Engineer-in-Charge.
M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at the points of contact of wood by chemical emulsion (in oil or kerosene based solution ) @ 0.5 litre /hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified & directed by Engineer-in-Charge.
S&F in repairs plastic water closet seat covers standered closed pattern with flat bottom and cover and MS chromium plated or aluminised hinging device complete all as specified and directed.
Removing excavated material n. exc. 50m and n.exc 250m depositing where directed at a level n. exc.1.5 m above the starting point complete all as specified and directed
satguruenterprises
Frends Enterprises
IDEAL CONSTRUCTION COMPANY
Unity Enterprises
M/s. MAYUR ENTERPRISES
ORIENT ELECTRIC CO
Shree Ayyappa Engineering
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .