Renovation And Furnishing Work Of Bharat Bhawan Bhopal And Installation Of Hydrant System At Triveni Museum Ujjain (M.P)

Amount

Providing and fixing for base frame work for partition /panelling on wall column or beam etc. by using teak, Sal wood,19 mm laminated board, frame work using two face finished 75mmx75mm section and 400 mm c/c grid work i/c extra member at skirting level frame shall be treated with 5.0% dilute anti termite emulsion sprayed with &the frame shall work shall be fixed to wall and finally cover with 12mm thk 100 % BWP ply wood all exposed surface cover with 1.00mm thk wooden laminated/Pvc laminate (if req.) or instruction of architect, work complete all labour material wastage etc. scaffolding and as per instruction of architect/Eng. in charge. Plywood century, green ply, duro, orchid or equivalent make

Providing and fixing of approved quality wallpaper with approved graphics and folder (as per Instruction of architect) and pasted on the panels & partition on surface prepared with putty with required adhesive on the surface (the rate does not include surface preparation) basic rate of wall paper is RS 105 to 120 per sqft. The item in good condition nothing shall be paid extra separately unless specified

Providing and fixing in position imported carpet/PVC Flanks of approved shade and brand 400 GSM PILE WT, Gross WT 1000 gms Graphic loop pile having thickness 2 mm-4mm with primary backing of polypropylene woven sect and secondary action back complete as per instruction, specifications and as per the direction of Eng. in charge, carpet and underlay to be installed with standard fevicol/Dunlop adhesive. The flooring to be installed agency or as approved with eighteen month warranty from principal from any manufacturing defects. The installation to be in line and level including the cost of all material, disposal of debris etc., Complete to the satisfaction of Eng. in charge Basic rate of carpet –RS 125 PER SQ make unitex or equivalent.(Sample Planks/Carpet approved before supply)

Providing and fixing of jute/fabric finish roller blind on windows opening the rate shall be inclusive of all necessary hardware complete. The blind will be operated manually .All work shall be carried out as per detail drawing and instruction of Architect (Make AD+Mac vista

Executive Table with Runner :-Table size :(1800mm x 1000mmx750mm) & Runner Size:- (1000x450x650) Providing and fixing in position table as per design by using 25mm thick plywood for top and 18 mm thick plywood for all other horizontal and vertical members telescopic cpu stand/modular keyboard tray shall be provided of approved model and make .All exposed plywood surface to be finished with 1mm thick laminate & unexposed surface to be finished in matching coat of French polish in required Coates, including cost of all hardware etc. work complete as per instruction Architect/Eng. in charge. Plywood century, greenply, duro, archid or equivalent make furniture Greenguard/Bifma certified co)

Executive Chair (high back) Supplying and installing high back chair model mint-1 ergonomically designed for contoured lumber support for extra comfort having seat made up of insert molded polyurethane foam of density 75 +/- 4 kg/m3 upholstered with foam laminated mesh fabric assembled over plastic seat cover the back made up of two pieces injection molded frame with the inner frame upholstered with mesh fabric and mounted on the main assembly ,the armrest top made up of injection molded polyurethane and mounted on the injection molded height adjustable type armrest with height adjustable up to 45+-5mm synchronized pivot mechanism of 360 degree revolving type and having tilt with 3 position locking anti shock feature pneumatic height adjustment of 90 mm neck rest assembly mounted on top of back made up of polyurethane foam upholstered with foam laminated mesh fabric and having vertical adjustment up to 45mm &angular adjustment of 30 degrees ,the pedestal made up of die cast aluminum fillted with 5 no twin wheel castors which ar injection molded in back pp all complete as per manufacture specification and direction of eng in charge. (sample chair approved before supply)

Providing and fixing of Godrej /herman miller/haworth or equivalent make In charge chair pch 9u01r, , the seat and back are made up of 1.2+0.1cm. Thick hot pressed plywood measured as per qa method described in ocpqlta-p14-18 and upholstered with fabric and molded pu form together with molded seat and back covers-b. The back is designed with contoured lumber support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area, the high back size is 47cm w x 60 cm h and seat size is 47 cm w x 48cm d.The chair pu foam is molded with density 45 +-2kg/m cube and hardness load 16+2kgf as per is":7888 of 25% compression. The one piece armrest are injection molded from black co-polymer pp .Centre tilt synchro mechanism has 360 degree revolving type, upright position locking tilt tension adjustment, seat/ back ratio of 1:3. The pneumatic height adjustment has an adjustment stroke of 12 +- 0.3 cm. Telescopic bellow assy: it is 3 pc telescopic type and injection molded in black pp. The pedestal is injection molded in black 33% glass filled nylon 66 and fitted with nos. Twin wheel casters. The pedestal is 66.3 +- 0.5 cm. Pitch dia (76.3 +- cm with castors). (sample chair approved before supply)

Providing and placing of MID back revolving chair for Visitor Chair type bio synchronic with fixed arm, ergonomic seat design, backrest made up two piece injection molded frame backrest symmetrical lumber support with material of aluminum die cast with ABS/nylon pu foam covered with mesh fabric 220 gram GSM thickness of fabric 5% (gram/sam) with a warranty period of 1 year product must be approved before supply.

Supplying and fixing of Delegate chair of size 560 x 590 x900mm and seat size 510x440x450(lxbxh) 4 ledge structure made out of I ST teak wood finished with melamine polish, Chair having standard arm seat base with XPU 40mm foam cover with interior match color fabric and seat back same. The rate are inclusive of all hardware tools and machinery including leads lift and necessary to complete the item in good condition nothing shall be paid extra separately unless specified.

Providing and fixing of Single seat sofa of size 600mmX 650X400mm in length with primary/secondary frame structure made with 19mm BWP plywood and 70mm elastic belt (If Req.) and 10mm foam around the framing and legs of sofa made with first class best quality seasoned teak wood as per directed by Architect/Eng. in charge. Sofa should be have cushioning with 36D Foam+20mm thick 28 d foam 25mm butter foam and covered with white finish cloth and then with premium quality fabric upholstery. (furniture Greenguard/Bifma certified )

Supplying and fixing of wooden sofa side table of (400mm L X400mm wx400mm H) Table top made with 19mm BWP plywood and finish with 4mm veneer or 1.00 thick laminated finished and legs and frame of table made with first class best quality seasoned teal wood as per detail. All work shall be carried out as per detail drawing and instruction of Architect/eng –in charge ( furniture Greenguard/Bifma certified co)

Providing and fixing of file storage cabinet 450mm wide Godrej/Herman miller/Haworth or equivalent file storage cabinet made up of 18mm BWP ply ,ply finished with 1.00mm thick laminated all drawer(as per req) to be mounted on telescope channels of (Hettich/ebco or equivalent)approved make .All exposed edges to be finished with Ist quality beading. All inside surface to be finished with 1.00 mm thk wooden laminated/Pvc laminate (if req) or instruction of architect. The cost is inclusive of all material, accessory, SS handle lock labor etc. complete .All plywood only century,greenply,duro,archid or equivalent make

Curved MDF Paneling:-Providing &fabricating paneling on Existing curved wooden frame work The frame work shall be clad with 6+6 mm thick flexi ply &4mm thick MDF finished with approved colour Duco paint, complete as per detailed or instruction of the Eng.-in charge

Providing and placing 4 Door important document case of make Godrej/Herman Miller /Haworth having the following specification: it shall have the configuration of 914 mm(W)X320 mm(D) 1742 mm(H) it shall have unique design providing the right rigidity to top hinged doors to facilitate easy use. The shall have a right knock Down construction. The top panel, back panel and side panel shall be made of 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 lever cam lock with common key.3mm thk glass shall be used in each door to clear inside vision which shall be secured in a metal frame through a rubber gasket. Scissor Mechanism shall be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each Door shall be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDI .Capacity of max80kg.The 2 Door case shall have 18mm PLB top straight edge with PVC lipping. The finishing shall inside Epoxy power coated to the thickness of 50 microns .The agency product shall be BIFMA Compliant as per Approved sample of 4 Door document case by Eng.-in –charge in consultation with client department before providing it at site.

Wooden solid Low height partition:-Providing and fixing of LOW height partially glazed/solid partition 75mm thk till 5’ height made on frame work of 18mm BWP PLY GRID SIZE 500MMx500mm horizontally and vertically with 12mm thick ISI grade premium quality BWR plywood on both sides ,plywood should be finished with 4mm thk veneer/ 1.00mm thk laminate as per Drawing. The framework shall be secured to the flooring. The glass to be fixed with the help of wooden beading finished with synthetic enamel paint satin finish as per detail DWG, The rate shall include ant termite treatment all hardware fitting, adhesive beading (12mmx75mm) ect, to The rates are inclusive of all item including lead &lift and necessary to complete, the item in good condition noting shall be paid extra separately unless specified. Plywood century,greenply,duro,archid or equivalent make

Wooden Solid full height Partition:-Providing and fixing of full height partially glazed partition 75mm thick till roof height made on frame work of 18mm BWP PLY GRID SIZE 50 mm X 50 mm c/c horizontally and vertically with 12mm thick ISI grade premium quality BWR plywood on both sides, plywood should be finished with 4mm thick veneer/laminate as per Drawing. The framework shall be secured to the flooring and celling. The glass to be fixed with the help of wooden beading finished with synthetic enamel paint satin finish as per detail DWG, The rate shall include ant termite treatment all hardware fitting, adhesive beading(12mmx75mm) etc. to The rates are inclusive of all item including lead &lift and necessary to complete, the item in good condition noting shall be paid extra separately unless specified (Plywood century, greenply, duro, archid or equivalent make)

Two track two panels sliding windows made of frame 67x50mm &sash 46x62 mm both having wall thickness of 2.3+-0.2 mm and single glazing bead/double glazing bead of appropriate dimension (Are of windows above 1.50 Sqm to up to 3.5 sqm)

Door Paneling :- Providing & fixing for panelling on walls /column /beam etc. by using dimensionally stable and wrap free BWP plywood/blackboard/MDF(IF Req) sheet work shall be fixed to base in straight ling and proper plumb using screw used in wall should properly fixed with M seal compound and raw plug. Finally all exposed surface finished with 1.00 laminates/The job shall be included all material labor wastage etc. complete plywood marine grade IS 710,work complete as per instruction of architect. (Plywood century,greenply,duro,archid or equivalent make)

Providing and fixing decorative laminate as per IS With marine grade PVC Glue (fevicol) applied @0.45 kg per sqm to partition ,paneling roof beam or similar places as directed in design and pattern having pin groove. a) 1.00mm thk plain gloss satin finish

Supplying and installation of 65” interactive flat panel, infrared Technology, i5/4GBRAM/ 256 SDD Hard disk with video conferencing through UHD camera, Interactive whiteboard, MS office professional &windows 10 professional, With 3600D HD zoom camera inbuilt Make- ViewSonic/Samsung/LG

Providing and laying of Digital printing based on various aspects of Sanskriti Art thematic, With frame of seasoned teak wood/Fiber canvas made on good quality fabric, Work complete as per instruction of architect

Providing and glazed laying multi charge matt/Digital Print finished vitrified tiles of sizes having water absorption less than 0.05% and conforming to is: 15622 of make :-Rak Nitco premium quality laid on 20mm the base of cement mortar 1:4 (1cement” 4 Sand) in all shapes and design including epoxy resins matching combined with a filler power grouting the joint work complete as per direction of eng in charge Tile size (600mmx1200mm) and (9-12 mm Thk) Make- RAK/NITCO/SIMPOLO.

Full flow foot valves can be installed at the bottom of the bottom of a pump suction line inside the well .foot valves are an inexpensive way to maintain prime on a single centrifugal pump. The foot valves are designed with a 105 larger flow area (including heavy stainless steel strainer) than the pipe size to insure minimal head loss. Full flow foot valves designed to have the high quality, long wearing construction necessary for valves that are continually submerged in a wet well and not readily accessible for inspection or repair. Foot vales have heavy cast bodies, rugged bronze internals and drip-tight resilient seating to prevent loss of suction. The resilient seal is compression molded (not glued or chemically bonded)onto the seal for long life 150 mm dia

Full flow foot valves can be installed at the bottom of the bottom of a pump suction line inside the well .foot valves are an inexpensive way to maintain prime on a single centrifugal pump. The foot valves are designed with a 105 larger flow area (including heavy stainless steel strainer) than the pipe size to insure minimal head loss. Full flow foot valves designed to have the high quality, long wearing construction necessary for valves that are continually submerged in a wet well and not readily accessible for inspection or repair. Foot vales have heavy cast bodies, rugged bronze internals and drip-tight resilient seating to prevent loss of suction. The resilient seal is compression molded (not glued or chemically bonded)onto the seal for long life 100 mm dia

Full flow foot valves can be installed at the bottom of the bottom of a pump suction line inside the well .foot valves are an inexpensive way to maintain prime on a single centrifugal pump. The foot valves are designed with a 105 larger flow area (including heavy stainless steel strainer) than the pipe size to insure minimal head loss. Full flow foot valves designed to have the high quality, long wearing construction necessary for valves that are continually submerged in a wet well and not readily accessible for inspection or repair. Foot vales have heavy cast bodies, rugged bronze internals and drip-tight resilient seating to prevent loss of suction. The resilient seal is compression molded (not glued or chemically bonded)onto the seal for long life 80 mm dia

Supply installation testing and commissioning of the supervisory control system for all the units showing temp of various independent system along with fault diagnostic facility and on/off control complete as required.(Work complete as per Regulation of fire safety Norms)

Providing and install Horizontally mounted centrifugal type multi stage fire pump having cast iron body, Bronze impeller, stainless steel shaft and capable of delivering against a total head of 75 Mtrs 150 HP 415 v2900 RPM ,Complete pressure gauge & gun metal cock on delivery side including bypass arrangement 30hp pump(Kirloskar) Work complete as per Regulation of fire safety Norms)

Providing & erecting pumping set having 80/26 Capacity of 70 M head. The pump will be as per T.A.C. and having Bronze impeller Bronze fitted The pump will be directly coupled to water cooled diesel engine developing 65 B.H.P. at 2900 R.P.M. ENGINE 4R1040 & erecting necessary 200 mm Dia. M.S. suction pipe & fittings & erecting 200 mm sluice valve and erecting 150 mm Dia. Valve in delivery line of pump and erecting 150 mm Dia. non-return valve in delivery line of pump and erecting 150 mm Dia. M.S. pipe and fittings for delivery line( Work complete as per Regulation of fire safety Norms)

Providing & erecting pumping set having Capacity of 3 L/S at 70/90 M head. The pump will be as per T.A.C and having Bronze impeller Bronze fitted The pump will be directly coupled to 15 H.P. 2900 R.P.M. 415V SPDP motor With necessary part Erecting necessary 80 mm, Dia. M.S. suction pipe & fittings erecting 80 mm sluice valve erecting 50 mm Dia. Valve in delivery line of pump erecting 50 mm Dia. Non return valve in delivery line of pump and erecting 50 mm Dia. M.S. pipe and fittings for delivery line erecting pressure gauge, & erecting pressure switch( Work complete as per Regulation of fire safety Norms)

RCC Pump foundation:- Suitable RCC pump foundation as per manufactures design anti vibration heavy duty mounting pads 01) 600x1100x150 2) 800x1500x150 3) 800x1500x200

Providing &fixing of fiber glass 3mm thick sheet roofing & fixing with J&L hooks nuts & bolts or required size of sheet is 2mtrx2mtr fixing on glass structure to cover the motor &pump( Work complete as per Regulation of fire safety Norms)

Supply installation testing and commissioning of the supervisory control system for all the unit showing temp of various independent system along with fault diagnostic facility and on/off control complete as required( Work complete as per Regulation of fire safety Norms)

Providing & fixing pressure gauge 100 mm with accessories &shall include stop cock with all fitting(make-gure/ deafness/Feibig) Work complete as per Regulation of (fire safety Norms)

Supply, installation, testing & commissioning of weather proof hydrant cabinets, fabricated from 14 G M.S Sheet with full heavy glass door & locking arrangement, suitable to accommodate 02 nos 20 Mtr 1long hose branch pipe. The cabinet shall be painted with two coat of primer & three coats of synthetic enamel paint of approved make red shade & shall be suitable mounted on a raised masonry plate form as per instruction of Eng. in charge work complete as per Regulation of fire safety Norms)

Providing and fixing of air vessel Tank of the following specification fabricated with MS Sheets Diameter:300/400 mm shell thk 8mm Dish Ends: 10mm Height:1500-1800 mm finishing : Applied Two coats of red enamel paint over primer outside and two coats of epoxy coating inside. Material of construction: MS Test Pressure:22 kg/Sqcm Height of supporting legs:400mm Work complete as per Regulation of fire safety Norms)

Supply installation testing & commissioning of cast iron Y Steiner with bronze perforated sheet basket tested to pressure of 20kg/sq cm including rubber gasket flanges nuts bolts and washer complete as required work complete as per Regulation of fire safety Norms) 100mm/200mm

Providing and fixing of Hessian fabric with Isolation with all Accessories Note:- The Bidder Shall quote his own rates for item rates.

Bidder Name

Amount

BHAWSAR CONSTRUCTION COMPANY(GSTN-23AGRPB4583E1ZH)