Special Repaiting of Mortuary Cooler at MMCH.

Amount

Special cleaning and disinfecting of the use Morgue shifting of Dead Body and also removal of decomposed dead body residuals cleaning with water and used formalin dehydrate solution etc. as per direction of EIC.

Repairing & Replacement of carriage assembly will be Telescopic action trolleys made of steel sliding on Telescopic rail & roller Etc. as Required damage Tray by changing roller tray structure etc. as per direction by EIC.

Cost of leak testing whole Refrigeration system part by part cooling coil Condenser coil and other part by presser 300 lbs & N2 gas flushing for remove moisture & oil complete the job for 1 no skill & Helper 3 days labour Each sets as per direction of EIC.

S & F Hermetically sealed Compressor (10000 BTU/Hr) After disentangling the damaged unserviceable, (Make- Copland, Model- KCM511CAL-B310H).

Supply of charging R- 404 Refrigeration Gas.

Supply and installation of 4 row evaporator coil having dimension of 30"x 12" and tube diameter 3/8". Made with heavy copper.

Supply and installation of 2 row condensing coil having dimension of 22"x 15" and tube diameter 3/8". Made with heavy copper.

Repairing of the lock latch arrangement and front doors of mortuary cooler cabinet and make the cabinet air leakage proof.

S & F of compressor Running burst proof 45 Mfd Capacitor.

Modification of existing evaporating and condensing unit which is situated in an integrated frame and mounted on the cut-out in the insulated Ceiling of cabinet. Make the system split in two parts- AHU unit and Outdoor unit. AHU system consists of 1 number 4 row copper evaporator coil, 2 nos 1600 CFM evaporator fan motor, micro Microprocessor base controller, Expansion Valve, Drier strainer etc. which are installed on the top of the Mortuary Cabinet. Outdoor unit contains- 1 number 2 row copper condensing coil unit, 1 number condenser fan motor, Hermetically sealed Compressor (10000 BTU/Hr) etc. Entire outdoor unit install in 5mm thick 40" x 40 " MS Angle frame with adequate supports. AHU to ODU refrigeration copper pipe line of 5/8" & 3/8" dia ( liquid & gas) with insulation and 4 core 4 Sq.mm Cu. Cable (Make- Polycab / KEI) up to 7.5 mtr for each system. Testing, commissioning, Running the Mortuary Unit & Observation of proper Functioning of the modified System & Temperature Setting (between 4 to 8ºC) as per direction of EIC.

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duties etc including GST. (ii) All materials, equipments & accessories must conform to relevant IS /IEC specifications. The AC machines to be supplied must be from the OEM / authorized dealer duly certified by the OEM. (iii) Necessary manufacturer's warranty certificate for materials, equipments & accessories will have to be submitted during delivery of the material.

INDIAN SERVICE

WEATHER MAKERS INDIA