GE I R AND D/CHD-36/2022-23

Amount

Taking down shutters of any description area n. exc 2.00 Sqm each and removing from site complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size n .exc 1.5 Sqm and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size exc 1.5 Sqm but not exc 4 sqm each each and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and directed.

Material and labour in repairs Aluminium anodised double shutter ventilator (glazed and wire gauge) top hung with aluminium ventilator frame or chowkat 1.5 mm thick aluminium anodised of size 100 mm x 44.5 mm and ventilator shutter frames glazed and wire gauze 1.5 mm thick aluminum anodised of size 44.5x44.5 mm incl aluminium grill and all fitting such as rubber gasket aluminium glazing clips and including SS wire gauge,4 mm thick frosted glass pane in glazed/gauzed shutter fixed with rubber gasket and glazing clip/aluiminium beads aluminium tower bolt 75mm 02 Nos in each shutter , aluminium butt hinges 50 mm 02 Nos in each shutter aluminium handle 75 mm 01 No in each shutter incl all accessories complete all as specified and directed.

Supply and fixing in repairs venition blinds , sheer demount blinds with aluminium roller tuber, cassette colour white fabric weight 140gms, light control 70% fabric composition 100 % polyester complete alll as specified and directed.

Dismantling existing Wall and ceiling boards of gypsum/perforated particle board including wooden framed work/GI frame /Aluminium frame work of any size & specifications complete all as specified and directed.

Supply and fixing for 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed.

Supply and fixing for pressed steel frames for doors with one rebates including necessary fixing lugs, hinges, lock strike plate etc, of size 105 x60mm complete all as specified and directed.

Supply and fixing for pressed steel frames for doors with bouble rebates including necessary fixing lugs, hinges, lock strike plate etc, of size 125 x60mm complete all as specified and directed.

Supply and fixing in opening complete solid PVC door frame of size 50mm x 47mm made outt of 5mm plain colour PVC sheet reinforced with MS square tube,

Supply and fixing for factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S. tube for top & bottom rails. M>S frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside wqith solvent cement for stiles and plain colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site complete all as specified and directed.

Supply and fixing for mild steel, plain black sheet in hearths; covering to door shutters; cupboard shutters; covering to door chowkats (frame)including godrej pattern locking arrangement cut to size edges beaded if directed holes punched; including rounded headed screws, clout nails or revets and fixed to wood or steel members etc with plam 40mm lap joints or welded riveted seams including bending turning up mitred angles stopped ends outlets etc 0.80mm thk incl spray painting both side complete all as specified and directed.

Supply and fixing of factory made panelled shutter 35mm thick 2nd class hard wood (two number of panels) with panels, with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed.

Supply and fixing for glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain chamfered or rounded fittedwith cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) 35mm thk IInd class hard wood complete all as specified and directed.

Supply and fixing for glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain chamfered or rounded fittedwith cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) 30mm thk IInd class hard wood complete all as specified and directed.

Material and labour for 35 mm thick flush shutters,solid core construction,with block board core and ply wood face pannels commercial type on both side with lipping/frame to match complete all as specified and directed.

Supply and fixing for steel window (box type) with gaused shutter factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. Note : (ii) MS fillets,MS Grills, glazing, wire gauge shall be measured and paid separately.

All as per serial Item no 20.00 above but without glazing bar complete all as specified. Note : (ii) MS fillets, wire gauge shall be measured and paid separately.

Supply and fixing of framed work such as grills, gratings etc wth ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred ,iron doors,Ms Plain sheet, XPM, ladders, framed balusters, walk way, railings, framedwork of water tanks and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

Welding in repairs to windows, door hinges, grills etc exc 2.50 cm of thickness not exc 6mm complete all as specified and directed.

Supply and fixing for aluminium (die cast) body door closer hydraulically regulated designation No.3 universal type suitable for aluminium door shutters of width 851 to 1000mm and of weight between 61 to 80Kg complete all as specified and directed.

Material and labour for 19mm thick block board grade-I quality exterior grade commercial type leaping with side and fixed with screw to timber frame work in repair complete all as specified and directed.

Supply and fixing for harrison Rail Stainless Stell 20mm with brackets stops complete all as specified and directed.

Material and labour for pre laminated particle bd 18mm interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fitted with all around timber beading of 18 x 18mm in repair complete all as specified and directed.

Material and labour veneered decorative 6mm thick ply wood grade-I (with BWR resin) with one side decorative face fixed with screw complete all as specified and directed.

Supply and fixing for continuous (piano) hinges mild steel bright finish or electrogalvanised 30mm flaps complete all as specified and directed.

Double action floor spring hydraulically regulated made up of min 1.25mm thick al alloy sheet foundation box, main body with staninless steel cover, governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and fixing for galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples

Supply and fixing for 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and fixing for mild steel butt hinges, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to angle iron frame where required complete all as specified and as directed.

Supply and fixing for 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed.

Supply and fixing for 150mm aluminum handles cast type anodized complete all as specified and directed.

Supply and fixing for 100mm aluminum handles cast type anodized complete all as specified and directed.

Supply and fixing for 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plates including fixing with welding complete to iron frame complete all as specified and directed.

Supply and fixing for hasp and staple safety type aluminium with hinge pin including bolt to hinge plate and fixed wit screws 100mm complete all as specified and directed.

Supply and fixing for ball catches with 8mm dia steel ball & brass body & striking plate including letting in as fixed complete all as specified and directed

Demolition of PCC cement concrete above ground floor and paving n.exc 15 cm thick (below or above ground level) un reiforced complete all as specified and directed.

Material and labour for PCC 75mm thick Type C-2 , 1:3:6 using 40mm gradded aggregate as in plinth protection/Pavings

Material and labour for 25mm thick plain cement concrete (1:2:4) type B-0 using 12.5 mmgraded stone aggregates as in Floor/pavings including finishing surface even and smooth without using extra cement complete all as specified and directed.

Supply and fixing Chequered cement concrete tile 30cm x 30cm x 25mm thk ultra finish set and jointed and pointed in neat cement slurry with mixture of white cement and pigment including screed bed 15mm thk in CM (1:6)

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material and labour for glazed ceramic coloured tile in vertical surfaces 450 x 300 x 7mm thk set and sointed in neat cement slurry and pointed in white or colour cement to match including 15mm thick rendering in cement mortar (1:4) finished even and fair complete all as specified and directed.

Material and labour for non skid coloured ceramic tiles of size 7-8 mm thick area of each tiles exceeding 0.06 Sqm bur not exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles including 15mm thk screed bed in CM (1:6) complete all as specified and directed.

Material and labour for non skid coloured ceramic tiles of size 7-8 mm thick area of each tiles exceeding 0.11 Sqm bur not exc 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles including 15mm thk screed bed in Cement mortar in cement mortar (1:6) complete all as specified and directed.

Material and labour for vitrified Ceramic tiles 10mm thick light shade (Square/ rectangular) polished, area of each tiles n. exc 0.36 SQm in floors etc,, set and jointed in neat cement slurry and pointed in shite or coloured cement to match the shade of tiles including 15mm thk screed bed in Cement mortar in cement mortar (1:6) complete all as specified and directed.

All as per serial item no 47.00 above but in vertical surface such as skirting, dado and risers including 15mm thk rendering in CM (1:4) finished even and fair

Demolition of stone slab and tiles of any description or thickness laid beded and pointed in any mortar as in floor,apron etc

Material and labour machine cut kota stone slab floorig 18-20mm thick over cement screed base laid and inted with rey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including 15mm thk screed bed in in CM (1:6) complete all as specified and directed.

Kota stone slab 18-20mm thk in riser of steps skirting dado and pillar laid over cement screed and jointing with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thk rendering in CM (1:4) finished even and fair complete all as specified and directed.

Material and labour for Granite (of any type) tiles 18-20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing including screed bed 15mm thk in cement mortar (1:6) complete all as specified and directed.

Material and labour for Granite (of any type) tiles 18-20mm thick machine cut,as in skirting or dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigmernt to match the shade of granite stone incl grinding and polishing including 15mm thk rendering in CM 1:4 finished even and fair complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

Material and labour for 15mm thick rendering in CM 1:6 to brick/Concrete wall surfaces finished even and smooth w/o using extra Cement complete all as specified and directed.

Material and labour for 15mm thick rendering in CM 1:4 to brick/Concrete wall surfaces finished even and smooth w/o using extra Cement complete all as specified and directed.

Material and labour two coats of oil distemper over one coat of priming incl necessary preparation

Material and labour for two coats of cement base paint over a coat of white wash on new surfaces of walls incl preparation of surfaces complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint ordinary tint on new steel surface over one coat of red oxide over 10 cm width or girth not otherwise described incl preparation complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint ordinary tint on new Wood surface over one coat of pink primer over 10 cm width or girth not otherwise described incl preparation complete all as specified and directed.

Supply and fixing for 10 liters capacity PVC valveless syphonic action type flushing cistern low level White with inlet ball valve & float, and handle including flush pipe of polythylene of low or high density of PVC, 32mm dia for low level cistern including bracket fixed in repairs complete all as specified and directed.

Supply and fixing brass CP basin mixer in repair for mixing hot and cold water screwed down for iron pipe 15mm

Supply and fixing for pillar taps cast copper alloy with capstan heads, CP, 15mm bore, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

Supply and fixing for 15mm bore CP brass fancy type bib tap with crutch or butterfly handle with long shunk/neck screwed down, screwed for iron pipe, fixed in repairs complete all as specified and directed.

Supply and fixing in repair vitreous china ware W.C squatt pan, orissa pattern size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including provn of lime concrete bedding fixed in repairs complete all as specified and directed.

Supply and fixing in repair vitreous china ware white wash down water closet (pedestal pattern) including connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, complete all as specified and directed.

Supply and fixing in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Material and labour vitreous china ware wash hand basin, flat back of size 550mmx400mm, white including brackets, fixed in repairs. complete all as specified and directed.

Supply and fixing for PVC connection 15mm size with PTMT nuts 450mm length

Supply and fixing for sheet glass shelf assembly consisting of 5.5mm thk sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fixing in repair brass chromium plated shower Rose 75mm size with long arm and swiveval neck

Supply and fixing for stainless steel sink with draining board made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe cast iron cantilever brackets connection incl waste coupling and waste pipe union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing 0.80mm thk stainless steel plate Rack of size 75cm x 70cm x 25cm having different section

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removing to store

Supply and fixing for 15mm bore steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or in floor complete all as specified and directed.

Re-fixing old steel tubing and connections in new or old position (walls, ceiling, floors etc,.) of following sizes :- 15 mm dia

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removing to store

Supply and fixing for 20mm bore steel water tubing galvanised , medium grade fixed to walls and ceiling or in floor complete all as specified and directed.

Re-fixing old steel tubing and connections in new or old position (walls, ceiling, floors etc,.) of following sizes :- 20 mm dia

Supply and fixing SS grating dome 100mm dia

Supply and fixing for stop valve/angle valve ISI marked, size 15mm bore, cast copper alloy, fancy type chromium plated screwed down, high pressure with crutch or butterfly handle srewed both ends for iron pipe & fixed in repairs complete all as specified and directed.

Supply and fixing for ball valve high pressure PTMT with epoxy coated aluminium rod & high density pastic ball screwed for iron pipe and fixed 20mm in repai complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed.

Dismantling of unframed timber scantling 40sqm ad over in section in any position

Supply and fixing for sheet glass ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane 4mm thk

Supply and fixing in repairs waste fittings 32mm dia brass CP for glazedware sinks basins etc with long screwed shanks and fly nuts flange end bedded in red lead complete all as specified and directed.

Dismentling water tanks exc 250&n.exc 500 ltr capacity and removing from site.

Supply and fixing in replacement of 500 ltrs capacity, double layered polyethylene water storage tanks (Cylindrical vertical with closed top) incl hoisted and fixed in position making connections incl wash out pipe of 20mm dia GI medium grade with plug 25cm long complete all as specified and directed.

Supply and fixing for tublar towel rail brass chromium plated 20mm dia D type 60mm long between flanges as in repair complete all as specified and directed.

Supply and fixing for stop valve (Concelled type) cast copper alloy screwed down high pressure with crutch or butterfy handle with long shank and cup 15mm as in repair complete all as specified and directed.

Supply and fixing for bath room mirror cabinet of size 400 x 500mm with looking miror as in repair complete all as specified and directed.

Material and labour for CP brass jet for EWC along with flexible pipe (minimum length 1 Mtr) as in repaircomplete all as specified and directed.

Material and labour for CP brass soap dish as in repair complete all as specified and directed.

Material and labour for CP Brass health faucet alongwith flexible pipe 1mtr length as in repair complete all as specified and directed.

Material and labour for glass corner shelf of size 250mm as in repair complete all as specified and directed.

Dismentling of cast iron or reinforced concrete pipes(any size) at any situation fixed any mortor, including all fittings complete all as specified and directed.

Supply and fixing for 75mm dia PVC (SWR) water pipes single socketed, in any length with rubber ring joint fixed to wall /floorall as specified and directed.

Supply and fixing for 75mm dia PVC (SWR) bends any radius of approved make complete all as specified and directed.

Supply and fixing for 75mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

Supply and fixing for 75mm Cast iron floor traps with grating including jointing to waste pipe with Drip joint fixed cncrete type B1 (1:2:4). complete all as specified and directed.(ISI Mark)

Material and labour glass putty.

Material and labour Drapery Cortain rod (conduit) of dia not less than 25 mm Stainless Steel with brackets and end coupling all as specified and directed.

Supply and fixing for MS butt hinges medium weight cold rolled 75mm size complete all as specified and directed.

Supply and fixing aluminum anodised door stopper 140mm long over all length complete all as specified and directed.

M/S MATLOOB AHMED